Sears 8080- User Manual
Sears 8080– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USING YOUR A/V PRODUCER; Features and Functions; TV; CBL; TUN
- Page 3 – SETTING THE CLOCK; Feature; To set up the CLOCK/TIME on the display screen:; For a detailed explanation of what function
- Page 4 – Press and release the TV key.; QUICK SET UP; VCR
- Page 5 – Set Up Codes for TVs
- Page 6 – or; To Set Up Your VCR or TV/VCR Combinations; Turn on your VCR and insert a tape.; Press and release the VCR key.; Set Up Codes For VCRs
- Page 7 – To Set Up Your Cable Box:; Turn on your Cable Box.; Press and release the CBL key.; If your original Scientific Atlanta remote control; Set Up Codes for TV/VCR Combinations
- Page 8 – Set Up Codes For Cable Boxes; SAT; To Set Up Your DSS or Satellite Receiver
- Page 9 – CD
- Page 10 – Set Up Codes for Tuner/Receivers
- Page 11 – To Set Up Your Amplifier; AMP
- Page 12 – Initially, moving AUX 1 to another key will; You can use the
- Page 13 – SEARCHING FOR YOUR CODE; If your components do not respond to the; XXX represents the last 3 digit code that was
- Page 14 – SETTING UP THE HOME THEATER MODE KEY; Finding Your Code
- Page 16 – The; The AUD or VID macro keys cannot be used; in your Home Theater Power key macro.
- Page 17 – To Delete a Timed Sequence; key to scroll through your saved timed
- Page 19 – HOW TO USE THE SHIFT KEY
- Page 20 – Sleep lock
- Page 21 – KEYMOVER
- Page 22 – TROUBLESHOOTING; Solution; CLEAR ALL; If you would like to reset the
- Page 23 – WARRANTY; Universal Electronics Inc.
INSTALLING THE BATTERIES
Note:
After inserting the batteries, the LCD screen will
enter a test mode which tests each segment of the
LCD screen. This process will last for 10 seconds or
until any key is pressed, which ever occurs first.
Your
A/V Producer requires four (4) new AAA
alkaline batteries. To install the batteries:
1
On the back of the
A/V
Producer, push down on
the tab and slide the
battery cover off.
2
Match the + and - marks
on the batteries to the +
and - marks in the battery
case, then insert the
batteries.
3
Slide the battery cover
back into place.
4
Test the unit by pressing
POWER. If the batteries
are inserted correctly, the
red light will blink.
POWER
URC 8080
A/ V Producer
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
USING YOUR A/V PRODUCER Features and Functions The illustration below and the chart on the next twopages describe the features and the functions of theA/V Producer’s keypad. The following keys willalways have the same function, regardless of whichcomponent you are controlling. For an explanationof w...
SETTING THE CLOCK Feature Function (Cont.) The CH + (Channel Up) and CH-(Channel Down) keys changechannels the same as the ChannelUp and Down keys on youroriginal remote. The AUD and VID macro keysmemorize up to 15 keystrokes thatcan be accessed in sequence at thepress of a single key. Thesekeys are...
To Quickly Set Up the A/V Producer to Operate Your Home Entertainment Components 1 Turn on all of the components thatyou will be setting up. 2 Press and release the TV key. 3 Press and hold MAGIC until thedisplay screen changes from[TV and the TIME] to [TIMED SEQ]. 4 Press the MENU - key one time.Th...
