Sears 316.35084- User Manual
Sears 316.35084– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 3 – OPERATE YOUR SAW SAFELY; RULES FOR SAFE OPERATION; SYMBOL; • IMPORTANT SAFETY INSTRUCTIONS •
- Page 4 – MAINTAIN YOUR SAW IN GOOD WORKING ORDER; KICKBACK SAFETY PRECAUTIONS
- Page 5 – TIONS
- Page 6 – SAFETY AND INTERNATIONAL SYMBOLS
- Page 7 – SAFETY FEATURES; KNOW YOUR SAW
- Page 8 – B B; and back toward the operator.; KICKBACK SPECIFICS
- Page 9 – OIL AND FUEL INFORMATION; OIL AND FUEL MIXING INSTRUCTIONS; Definition of Blended Fuels; Using Fuel Additives
- Page 10 – STARTING/STOPPING INSTRUCTIONS; BEFORE STARTING ENGINE
- Page 11 – STOPPING INSTRUCTIONS; lever of the; STARTING A COLD ENGINE; NOTE: This unit will not run with the lever in Position 1.; NOTE: If chain turns while idling - turn screw back to the; STARTING A WARM ENGINE
- Page 12 – CHAIN BRAKE TEST; Chain Lubrication
- Page 13 – OPERATING INSTRUCTIONS; FELLING; the area for bystanders, animals or obstacles.; Hinge
- Page 14 – LIMBING; NOTE: The best way to hold a log while bucking is to use; BUCKING USING A SAWHORSE; and bar are being properly lubricated.
- Page 15 – MAINTENANCE AND REPAIR INSTRUCTIONS; CUSTOMER RESPONSIBILITY
- Page 16 – REMOVING GUIDE BAR AND CHAIN; NOTE: Always wear heavy gloves when handling the; REPLACING; GUIDE BAR AND CHAIN; NOTE: The guide bar retaining nuts are installed only
- Page 17 – SAW CHAIN TENSION ADJUSTMENT; NOTE: If chain is difficult to rotate on guide bar or if it; CHAIN BRAKE MECHANICAL TEST
- Page 18 – AIR FILTER; NOTE: It is advisable to have a supply of spare filters.; FUEL FILTER; NOTE: Do not pull hose completely out of tank.; The fuel filter should be replaced after each
- Page 19 – OIL FILTER; NOTE: Drain oil reservoir before changing filter; SPARK PLUG; NOTE: For efficient operation of saw engine, spark plug; CARBURETOR ADJUSTMENT; NOTE: A clogged spark arrester screen will dramatically
- Page 20 – STORING A CHAIN SAW; NOTE: Store the unit in a dry place and away from possi-; REMOVING A UNIT FROM STORAGE; Sprocket Tip Lubrication; NOTE: It is not necessary to remove the saw chain to; SAW CHAIN / BAR LUBRICATION; NOTE: Saw chain stretches during use, particularly when; AUTOMATIC OILER
- Page 21 – GUIDE BAR MAINTENANCE:; NOTE: The condition of the oil passages can be easily; CHAIN MAINTENANCE; INERTIA CHAIN BRAKE® ACTION; NOTE: THIS SAW IS EQUIPPED WITH AN INERTIA; CHAIN REPLACEMENT INFORMATION
- Page 22 – TROUBLESHOOTING
- Page 23 – SPECIFICATIONS
- Page 25 – PARTS LIST
- Page 26 – EPA Emission Control Warranty Statement; Your Warranty Rights and Obligations
Operator’s Manual
55cc 2-Cycle
GASOLINE CHAIN SAW
Model No. 316.350840
with
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
C A U T I O N : B e f o re u s i n g t h i s
p ro d u c t , re a d t h i s m a n u a l a n d
f o l l o w a l l s a f e t y r u l e s a n d o p e r -
a t i n g i n s t r u c t i o n s .
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our website: www.sears.com/craftsman
9096-31B204 date(12/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS Warranty Page 2 Safety Rules Pages 3 - 8 Oil and Fuel Information Page 9 Starting/Stopping Instructions Pages 10-12 Operation Pages 13 - 14 ONE YEAR LIMITED WARRANTY ON CRAFTSMAN GAS CHAIN SAW For one year from the date of purchase, when this Chain Saw is used and maintained accord...
READ ALL INSTRUCTIONS PLAN AHEAD • Read the instructions carefully. Be familiar with the con- trols and proper use of the unit. • Do not operate this unit when tired, ill or under the influ- ence of alcohol, drugs or medication. • Children must not operate the unit. Teens must be accompanied and gui...
RULES FOR SAFE OPERATION • Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unitmust be in a stable position while starting. SeeStarting/Stopping Instructions. • Before you start the engine, make sure the area around the saw is clear. Never t...
