Sears 200.71987- User Manual

Sears 200.71987– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 3 – CHARgE IMMEDIATELY AfTER PURCHASE; IMPORTANT: READ AND SAVE THIS SAfETY AND INSTRUCTION MANUAL.
Page 4 – This Portable Power 950 comes with a sealed, non-spillable DieHard
Page 8 – the cables are tight.; STORAgE AND MAINTENANCE; and the JUMP START ON/OFF switch in the OFF position when not using; Replacing the built-in light; Test the light by switching the light on and off.; Customer Technical Assistance
Page 9 – table Power 950 from a vehicle’s 12V accessory outlet.); Replacement Light bulb

Loading the manual

CAUTION:

Read all Safety Rules and Operating Instructions,

and follow them with each use of this product.

00-99-000864/0808

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

OPERATOR’S MANUAL

Model No.

200.71987

Portable Power 950

Jump Starter and

DC Power Source

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - CHARgE IMMEDIATELY AfTER PURCHASE; IMPORTANT: READ AND SAVE THIS SAfETY AND INSTRUCTION MANUAL.

• 1 • IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE IMPORTANT: READ AND SAVE THIS SAfETY AND INSTRUCTION MANUAL. IMPORTANT SAfETY INSTRUCTIONS 1. Charge the 950 internal battery immediately upon purchase, every 30 1.1 days and after every use.Use in a well ventilated space. 1.2 Contains a sealed, non...

Page 4 - This Portable Power 950 comes with a sealed, non-spillable DieHard

• 2 • DIEHARD PORTAbLE POWER 950 JUMP-STARTER/DC POWER 2. SOURCE fEATURES CHARgINg THE INTERNAL bATTERY 3. IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE • KEEP fULLY CHARgED. • This Portable Power 950 comes with a sealed, non-spillable DieHard maintenance-free lead-acid battery. This internal battery...

Page 8 - the cables are tight.; STORAgE AND MAINTENANCE; and the JUMP START ON/OFF switch in the OFF position when not using; Replacing the built-in light; Test the light by switching the light on and off.; Customer Technical Assistance

• 6 • Remove the negative (first) and positive nuts and bolts securing the cable 9.5 to the battery.Push cables to the side and carefully slide battery out of the 950. 9.6 Reverse steps for assembly. Make sure that the nuts and bolts securing 9.7 the cables are tight. STORAgE AND MAINTENANCE 10. IMP...