Sears 200.713201- User Manual

5 SAFETY TROUBLESHOOTING MAINTENANCE OPERATION PARTS BEFORE USING YOUR BATTERY CHARGER It is important to understand your charger's requirements. This section will tell youabout your charger's electrical requirements and how to prepare a battery forcharging. PLUGGING IT IN WARNING: Electrical Shock ...

6 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS USING YOUR BATTERY CHARGER To obtain the best results from your battery charger, you must know how to use itproperly. This section will tell you how to set the controls, and how you can charge abattery while it is still in the vehicle, or you can ...

8 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS LED INDICATORS: Two LED INDICATORS provideinformation on the state-of-charge byglowing steadily or blinking at differentintervals. GREEN, FAST BLINK:When the charger is charging a battery,the green LED indicator will blink rapidly. GREEN, STEADY G...

9 SAFETY TROUBLESHOOTING MAINTENANCE OPERATION PARTS 6. Set the Selector Switches to the desired settings. (See “Setting theControls” on page 6.) 7. Plug the power cord into an AC outlet. The green LED indicator should blinkrapidly to indicate that the battery isbeing charged. 8. When the battery is...

10 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS 10. Standing away from the battery, remove the negative lead from theinsulated cable connected to theNEGATIVE post first. Then removethe lead from the POSITIVE post. 11. Clean and store the battery charger in a dry location. TOGROUNDEDPOWEROUTLET...

11 SAFETY TROUBLESHOOTING MAINTENANCE OPERATION PARTS CALCULATING CHARGE TIME Battery Rating Method Use the following table to more accurately determine the time it will take to fullycharge a battery that is initially at 50% State-of-Charge. Identify your battery type and Voltmeter Method To find th...

12 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS MAINTENANCE AND CARE To keep your battery charger working properly for years: 1. Clean the clamps each time you are finished charging. Wipe off anybattery fluid that may havecome in contact with the clamps toprevent corrosion. 2. Coil the input a...

13 SAFETY TROUBLESHOOTING MAINTENANCE OPERATION PARTS Clamps not making goodconnection. 2-amp charge rate. No AC power reachingcharger. Check for poor connection at battery. Makesure clamps and posts are clean. Batterymay not accept an AUTOMATIC charge ifseverely discharged. Use MANUAL setting,see &...

14 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS PARTS This section shows an illustration of your battery charger. Use it to become familiarwith where all the parts are located, and what they look like. Item 1 2 3 4 5 6 Replacement Parts List Model 713201 Description Handle Switch - left DPDT M...

15 SAFETY TROUBLESHOOTING MAINTENANCE OPERATION PARTS WIRING DIAGRAM

16 SAFETY OPERATION MAINTENANCE TROUBLESHOOTING PARTS For information about troubleshooting Call toll-free from anywhere in the U.S.A.7 am to 4:30 pm CST Monday through Friday 1-800-732-7764 For the repair or replacementparts you need Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) F...