Page 2 - Revision history; Revision
Revision history Copyright © 2007-2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A.Publication number: 100480757, Rev. B January 2008Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barrac...
Page 3 - Contents
Barracuda 7200.10 Serial ATA Product Manual, Rev. B i Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - ii
ii Barracuda 7200.10 Serial ATA Product Manual, Rev. B
Page 5 - iii; List of Figures
Barracuda 7200.10 Serial ATA Product Manual, Rev. B iii List of Figures Figure 1. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Introduction; Barracuda
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Barracuda ® 7200.10 Serial ATA model drives: These drives provide the following key features:• 7,200 RPM spindle speed.• High...
Page 8 - About the Serial ATA interface; ers or other configuration options.
2 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:• Easy installation and configuration with true plug-and-play connectivity. It i...
Page 9 - Drive specifications; the drive; Specification summary tables
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following...
Page 10 - Drive specifications summary; for 250 Gbyte models
4 Barracuda 7200.10 Serial ATA Product Manual, Rev. B Table 1: Drive specifications summary for 250 Gbyte models Drive specification ST3250410AS ST3250310AS Formatted capacity (512 bytes/sector)* 250 Gbytes Guaranteed sectors 488,397,168 Heads 2 Discs 1 Bytes per sector 512 Default sectors per track...
Page 12 - Formatted capacity; Default logical geometry; LBA mode; Recording and interface technology
6 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 2.2 Formatted capacity *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks ...
Page 13 - Average
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 7 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:• Track-to-track s...
Page 14 - Power specifications; Power dissipation; Spinup
8 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 2 on page 18. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurem...
Page 16 - Environmental specifications
10 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 2.9 Environmental specifications 2.9.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ...
Page 17 - Acoustic emission; Quiet Seek
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 11 2.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis. 2.9.6.1 Operating vibration The maximum vibrati...
Page 18 - Electromagnetic immunity; Radio frequency environments; Test
12 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 2.11 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table ...
Page 19 - Reliability; C. Operation at temperatures outside the specifica-; Agency certification; Safety certification; Nonrecoverable read errors
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 13 2.12 Reliability 2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The product shall achieve an Annualized Failure Rate (AFR) of 0.34% (MTBF of 0.7 million hours) when oper-ated in an environment of ambient air temperatu...
Page 20 - . This booklet is available from the Super-
14 Barracuda 7200.10 Serial ATA Product Manual, Rev. B Korean RRL If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para-graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) ...
Page 21 - Environmental protection; China Restriction of Hazardous Substances (RoHS) Directive; Corrosive environment; 中国限制危险物品的指令
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 15 2.14 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.14.1 European Union Restriction of Hazardous Substances (RoHS) D...
Page 23 - Configuring and mounting the drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 17 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exp...
Page 24 - Configuring the drive; Figure 1. Serial ATA connectors; Serial ATA cables and connectors; Figure 2. Attaching SATA cabling
18 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 3.2 Configuring the drive Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationship. If two d...
Page 25 - Drive mounting; Figure 3. Mounting dimensions
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 19 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figures 3 for drive mounting dimensions. Follow these important mounting pre-cautions whe...
Page 27 - Hot-Plug compatibility
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 21 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed...
Page 28 - Serial ATA device plug connector pin definitions; installed in a blind-mate backplane configuration.; Serial ATA connector pin definitions
22 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 4.2 Serial ATA device plug connector pin definitions Table 5 summarizes the signals on the Serial ATA interface and power connectors. . Notes: 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch. 2. The comments on the mating sequence...
Page 29 - See; Supported ATA commands; Command name
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 23 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification . See “S.M.A.R....
Page 31 - Identify Device command; The Identify Device command (command code EC; xxxx
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 25 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 6 on...
Page 32 - Word
26 Barracuda 7200.10 Serial ATA Product Manual, Rev. B 60–61 Total number of user-addressable LBA sectors available(see Section 2.2 for related information)*Note: The maximum value allowed in this field is: 0FFFFFFFh (268,435,455 sectors, 137 Gbytes). Drives with capacities over 137 Gbytes will have...
Page 37 - Seagate Technology support services; Online services; Internet; mySeagate; Seagate Service Centers; Presales Support; SeaTDD
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 31 5.0 Seagate Technology support services Online services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presal...
Page 38 - Direct dial; and Mexico
32 Barracuda 7200.10 Serial ATA Product Manual, Rev. B Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for ...
Page 39 - Index
Barracuda 7200.10 Serial ATA Product Manual, Rev. B 33 Index A ACA 14 acceleration 11 acoustics 11 Active 9 Active mode 9 actuator arm 8 AFR 13 Agency certification 13 altitude 10 Ambient temperature 10 ambient temperature 7 , 8 Annualized Failure Rate 13 Annualized Failure Rate (AFR) 13 areal densi...
Page 44 - Seagate Technology LLC
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100480757, Rev. B, Printed in U.S.A.
