Sanyo VMC-8618 - Manual

PRECAUTION If an abnormality does occur, turn the power switch off andunplug the unit. Have a qualified technician perform anyrepairs.Do not use the monitor if it makes a strange noise, emits astrange odor, or if smoke comes out from itIf used under these conditions, the monitor may cause a fire ore...

PARTS NAMES Front Panel 1 Speaker When the monitor selector button (A, B or Y/C) is pressed,the speaker lets you hear the sound from the componentswhich are connected to the terminals at the rear of themonitor. (Use components which produce audio output.) 2 On-screen display button (OSD) When this b...

PARTS NAMES Rear Panel 1 AC INPUT socket Connect the AC power cord (supplied) securely to thissocket and to a wall outlet. 2 Rear A terminals (AUDIO/VIDEO A terminals) When the monitor A selector button at the front of themonitor is pressed, the audio and video signals from thecomponent which is con...

CONNECTION Before making any connection, make sure all the devices are turned off.Before making the connections, please refer to the instruction manual accompanying each device. If the devices are not connectedproperly, that may cause a fire and/or damages. Note: • The components and connection cabl...

BASIC OPERATION 1 Press the POWER button to turn on thepower. ON: The power is turned on (the POWER indicator is lit). The signals from the channel (A, B or Y/C)which was being used when the power was lastturned off will be input. OFF: The power is turned off (the POWER indicator is off). Note: If t...

ADJUST THE OSD MENU ITEM Open the menu screen (press the OSD button), use thecursor buttons to select the desired menu item, and thenpress the ENTER button. Note: The setting characters which are displayed on each adjustment screen (such as 50%) maynot display correctly (dropout) in some cases. COLO...

ADJUST THE OSD MENU ITEM VOLUME adjustment 1 Select “6. VOLUME 50%” and then press theENTER button. 2 Use the cursor ( l ) and ( j ) buttons to adjust the sound volume. Monitor switching time (dwell time) setting For Model 8613 only 1 Select “7. DWELL TIME 5S” and then press theENTER button. 2 Use t...

ADJUST THE OSD MENU ITEM Displaying characters such as for settinglocation on the monitor screen (Refer to“CHARACTERS TABLE”.) Note: If there is no signal being input from the input terminals selected (A, B or Y/C) at the rear ofthe monitor, the title cannot be set for thoseterminals. 1 Select “9. T...

LANGUAGE SCREEN TABLE English Français Deutsch Menu Title/channel Automatic title/channel selection Title settings COLOR adjustment TINT adjustment BRIGHTNESSadjustment CONTRAST adjustment SHARPNESS adjustment VOLUME adjustment DWELL TIME setting L8MV5/US, L8MW5/US (VMC-8618, 8613 GB) 2001. 2. 23 11

TROUBLESHOOTING Solutions to common problems related to your monitor are describe here. If none of the solutions presented here solve the problem,unplug the monitor and consult a SANYO-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) Page No picture...

SPECIFICATIONS VMC-8613 VMC-8618 Color system PAL/NTSC, selected automatically Picture tube 13 inch 18 inch Resolution More than 750 TV lines More than 800 TV lines Input terminals S-VIDEO signal (VIDEO C) Separate Y/C signal, mini-DIN connector (1) Y signal: 1.0 Vp-p, 75 Ω negative sync C signal: 0...