Page 2 - Features
Features These air conditioners are equipped with a cooling function. Details on this function are provided below; referto these descriptions when using the air conditioner. • Microprocessor Controlled Operation The interior compartment of the remote controlunit contains several features to facilita...
Page 3 - Contents; Product Information; Warning Symbols; CAUTION
Contents Page Features .................................................................................................................. 2Product Information .............................................................................................. 3Warning Symbols ................................
Page 4 - Safety Instructions
Installation Location • We recommend that this air conditioner be installed properly byqualified installation technicians in accordance with the InstallationInstructions provided with the unit. • Before installation, check that the voltage of the electric supply in yourhome or office is the same as ...
Page 5 - Names of Parts; NOTE
Names of Parts Each air conditioner shown below consists of an indoor unit and an outdoorunit. You can control the air conditioner with the remote control unit. NOTE This illustration is based on the external view of a standard model.Consequently, the shape may differ from that of the air conditione...
Page 6 - Unit Display and Operation Selector
Unit Display and Operation Selector 1. TEST RUN2. PCB CHK(ON)3. RCU MAIN (OFF)4. (OFF) ADDRESS OPERATIONlamp TIMERlamp Remotecontrolreceiver Recessed type Ceiling-mounted type Air filter Recessed type Air intakegrille Operation selector Ceiling-mounted type Air intake grille Finger-hold Operation se...
Page 7 - Unit Display and Operation Selector (continued)
Unit Display and Operation Selector (continued) REMOTE CONTROL receiver This section picks up infrared signals from the remote control unit(transmitter). Operation selector ON position This position is for operating the air conditioner with the wirelessremote control unit.The selector should normall...
Page 8 - AA; Symbols; ON
Remote Control Unit (Display) (1) Operation mode AUTO ....................................... COOLING................................. HEATING ................................. FAN .......................................... (2) Fan speed Automatic operation .............. HIGH .........................
Page 9 - Remote Control Unit
9 OI-212-09EG Remote Control Unit Sensor Transmitter Display NIGHT SETBACK button 1 HR. TIMER button MODE selector button FLAP button ADDRESS switch (Cover closed) ON/OFF operation button Temperature setting buttons FAN SPEED selector button TIMER SELECT button TIMER AND PRESENT TIMEsetting buttons ...
Page 11 - Using the Remote Control Unit
11 OI-212-11EG Using the Remote Control Unit How to Install Batteries 1. Slide the cover in the direction indicated by the arrowand remove it. 2. Install two AAA alkaline batteries. Make sure thebatteries point in the direction marked in the batterycompartment. 3. Use a thin object such as the tip o...
Page 12 - Using the Remote Control Unit (continued)
12 OI-212-12EG Using the Remote Control Unit (continued) Mounting the Remote Control Unit When attaching to wall 1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the wall location where the remote control unit is to be attached, then attachthe holder to the wall. 2) When taking ...
Page 14 - Operation with the Remote Control Unit (continued)
Operation with the Remote Control Unit (continued) 2. Manual Operation NOTE Check that the circuit breaker on the power panel is turned on and that theoperation selector of the indoor unit is in the ON position. If the automatic operation settings of the unit are not satisfactory, press thesetting b...
Page 16 - Night Setback Mode
Operation with the Remote Control Unit (continued) 4. Fan Only If you want to circulate air without any temperature control, follow thesesteps: STEP 1: Press the MODE selector button to switch to the fan mode.( ) STEP 2: Press the ON/OFF button. STEP 3: Press the FAN SPEED selector button to select ...
Page 18 - How to set the OFF time; Special Remarks
18 OI-212-18EG 2. How to set the OFF time (Example) To stop the air conditioner at 11:30 pm. 1. Press the Program button ( ) once. 2. • Press the HH button until PM 11 isdisplayed. • Press the MM button until 30 isdisplayed. 3. Press the ON/OFF button to start the air conditioner. 4. Press the TIMER...
Page 19 - How to set the ON time
19 OI-212-19EG Setting the Timer (continued) 3. How to set the ON time (Example) To start operation at 7:10 am. Operation Indication 1. Press the Program button ( ) twice. 2. • Press the HH button until AM 7 isdisplayed. • Press the MM button until 10 isdisplayed. 3. Press the ON/OFF button to start...
Page 20 - Using the 1-Hour OFF Timer
20 OI-212-20EG Using the 1-Hour OFF Timer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardlessof whether the unit is on or off when this button is pressed. The indicator in the display indicates that this function is operating. Setting procedure: Regard...
Page 21 - Adjusting the Airflow Direction
Adjusting the Airflow Direction A. Horizontal (Wall-mounted type only) The horizontal airflow can be adjusted by moving the vertical vane to theleft or right. B. Vertical Confirm that the remote control unit has been turned on. Press the FLAPbutton to start the flap moving up and down ( ). If you wa...
Page 22 - Care and Cleaning
Care and Cleaning 1. For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning. 2. Do not pour water or spray detergent on the indoor unit to clean it. This will damage the internal components and may cause anelectric shock or fire. Air Intake and outlet si...
Page 24 - Operating Range
Troubleshooting If your air conditioner does not work properly, first check the following points before requesting service.If it still does not work properly, contact your dealer or service center. Trouble Possible Cause Remedy Air conditioner does notrun at all. 1. Power failure. 1. Restore power. ...
