Sanyo PLC-XW200 - Manual

Brightness(Lamp mode : “High” &
Image mode: “Dynamic”)

Model name

PLC-XW200, XW250 series

Panel

0.55 inch TFT p-Si x 3

No. of pixels

2,359,296 (1024 x 768 dots)

Projection lamp

220W UHP

XW250 : 2,600 lm
XW200 : 2,200 lm

Contrast

500:1 (Lamp mode : “High” & Image mode: “Dynamic”)

Uniformity

85% (corner to center)

Projection lens
Screen size
Zoom / Focus

F2.0-2.15, f = 18.38 - 22.06 mm / 0.72” - 0.87”

40” - 300 ”, 1.3m - 11.8m / 4.3’ - 38.7’, U:D = 6:1
100” at 3.3m - 3.9m, 10.8‘ - 12.8’, 1 : 1.2 Manual driven

HDTV signals

480i, 480p, 575i, 575p, 720p, 1035i and 1080i

Color systems

PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N

Video Signal

Composite, S-Video, Component

Computer Terminal

D-sub15 x 1 : Analog RGB Input
(Component and S-video input with conversion cable)
D-sub15 x 1 : Analog RGB Input or Monitor out

Video Terminal

RCA x 1 : Composite video

Computer compatibility

(UXGA/WXGA)/SXGA/XGA/SVGA/VGA/MAC

Audio

Mini-Jack (stereo) x 1 : Input (for Computer & Video)
Mini-Jack (stereo) x 1 : Output (variable audio out)

Communication Terminal

RJ-45 (LAN) D-sub 9pin (RS 232C)

Presentation Tool

Freeze / Digital Zoom / No Show / etc

Other Feature

Progressive, 3-2 & 2-2 pull down, User Logo

Scanning frequency

H/V sync 15 - 100kHz, 50 - 100Hz, Dot clock 140 MHz

Sound output

1.0 W Mono

Fan Noise

29dBA (Lamp mode “Eco”)

Voltage

100V-120V AC, 200V-240V AC

Power consumption

XW250 : 212W / 296W (Lamp mode: Eco / High)
XW200 : 212W / 272W (Lamp mode: Eco / High)

Standby power consumption

0.4W / 4.3W (Standby mode: Eco/ Network)

Dimensions (W x H x D)

13.1” x 3.4 “ x 9.7” (not including protruding parts)

Weight

5.5 lbs.

Easy Setup Function

Ultra Por table Multimedia Projector PLC-XW250/XW200

High Cost Performance with Easy Setup Function

PLC-XW250 2600 lumens
PLC-XW200 2200 lumens

Specifications

• D-sub 15pin for Input, D-sub 15pin for Input or Monitor out

• Direct power off (AC plug out before turned-off)

• 18 languages (Operation menu) … New: Thai, Turkish

• Colorboard (4 color) mode, Security:PIN code lock, Key lock

Wired LAN(RJ-45) for projector control

Enviroment friendly power consumption in

standby mode: 0.4w

Other Features

PLC-XW250 / XW200 provides "Auto Setup Function" that

corrects vertical shape distortion by searching for an input

signal and detecting projector

incline, reducing setup time.

Furthermore, the "Screen

Guidance Function" allows

projector set up according to

the displayed guidance. This

function provides all an easy

guide to projection.

SANYO Presentation Technologies

©

2009 SANYO North America Corporation.

Toll free:

888-337-1215 www.sanyoprojectors.com









* Replacement Lamp Type No.: 610 345 2456

* 1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international

standards.

* 2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.

* Specifications as of May 26, 2009, subject to change.

* All product names and company names are trademarks or registered trademarks of their respective

companies.

This model is equipped with Wired LAN(RJ-45) that allows

you to manage and control projector via Network. It is

possible to check the operating time of lamp and manage

the warning notification by Email. Power ON/OFF and

switching of input sigal can be controled. You can save a lot

of time with manage and control.

We’ve reduced the power consumption in standby mode to

0.4w. Caring for the enviroment is required due to global

warming and CO2 reduction. The standby power consumption

is reduced by 84% compared to previous model.