Page 2 - Features and Design; •The contents of this manual are subject to change without notice.
2 Features and Design ◆ Large Screen in Limited Space Short focus lens allows you to project large images from short distance (p.14). Images can be projected on the floor. ◆ Security Function The Security function helps you to ensure security of the projector. With the Key lock function, you can loc...
Page 3 - Table of Contents; Trademarks
3 Table of Contents Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . . . . . . 2Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3T...
Page 4 - To the Owner; RISK OF ELECTRIC SHOCK; FOR EU USERS; CAUTION
4 To the Owner CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PA R T S I N S I D E E X C E P T L A M P REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VO LTAG E C O N S T I T UT I N G A R I S K O F EL...
Page 5 - Safety Instructions; NOTE FOR CUSTOMERS IN THE US
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth fo...
Page 7 - Installing the Projector in Proper Position; – Fix the projector when installing it so that the
7 Do not roll the projector more than 10 degrees from side to side. Do not put the projector on either side C or E to project an image. Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard. Installing the Projector in Proper Position 10˚ 10˚ スタンド取り付け穴と...
Page 8 - Compliance; AC Power Cord for the United Kingdom:; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; Federal Communications Commission Notice
8 Compliance AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . ...
Page 9 - Bottom; Part Names and Functions; Do not touch the projection window,
9 7.75 (196.8) 7.91 (201) 4.50 (114.3) Lens c en ter 4.29 (109) 8.58 (218) 14.72 (374) 1.0° 1.0° 0.17 (4.2) 19.49 (495) 16.59 (421.5) 0.41 (10.5) 0.33 (8.5) 9.37 (238) ス タ ン ド 取 り 付 け 穴 と 天 吊 り 用 穴 ４ カ 所共通 PLC-XL50 Bottom Back w Top controls and Indicators e Exhaust Vent r y !1 !3 CAUTION Hot air is...
Page 11 - ed
11 Part Names and Functions Top q w e r t y u i o !0 r LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end (pp.58, 66). w WARNING TEMP. indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the proje...
Page 12 - Automatically adjust the computer image to its optimum; – Select an item or adjust the value in the On-Screen
Part Names and Functions Remote Control / CEILING t e o !3 r !4 !2 q ON/STAND-By button Turn the projector on or off (pp.20, 21). w VIDEO button Select VIDEO input source (pp.25, 37). e COMPUTER button Select COMPUTER input source (pp.25, 27, 38). r MENU button Open or close the On-Screen Menu (p.22...
Page 13 - Operating Range
Part Names and Functions 1 2 3 To ensure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid matter. ● Do not expose the rem...
Page 14 - For the projector positioning, see the figures below.; Positioning the Projector; Installation; Projection angle can be adjusted up to 1.0 degree with the; Keystone distortion of the projected image can be; Adjustable Feet
✔ Note: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. • All measurements are approxima...
Page 15 - Mounting the Rear Leg; Rear Leg; Turn off the projector and unplug the AC power cord.; • Make sure not to lose screws when installing the rear
15 Mounting the Rear Leg Rear Leg Turn off the projector and unplug the AC power cord. 1 Secure the rear leg with the four (4) screws. 2 Screw Rear leg Installation ✔ Note: • Make sure not to lose screws when installing the rear leg.
Page 16 - Cables used for connection
16 External Audio Equipment VGA cable Audio cable (stereo) Audio cable (stereo) Monitor Output or Monitor Input Audio Output AUDIO INCOMPUTER AUDIO OUT (stereo) Audio Input COMPUTER IN 2/ MONITOR OUT Monitor Output COMPUTER IN 1 VGA cable This terminal is switchable. Set up the terminal as either Co...
Page 18 - • Component Cable
18 Installation Connecting to Video Equipment (Component and RGB Scart) Cables used for connection • Audio Cables (Mini Plug: stereo, RCA x 2) • Scart-VGA Cable • Component Cable (Cables are not supplied with the projector.) ✔ Note: • When the AUDIO OUT is plugged-in, the projector’s built-in speake...
Page 19 - For Continental Europe; Connecting the AC Power Cord
NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. To power cord conne...
Page 20 - Selected Input Source and Lamp Mode; PIN Code Input Dialog Box; Turning On the Projector; Basic Operation; Enter a PIN code; CAUTION ON HANDLING THE PIN CODE
Connect the projector’s AC power cord into an AC outlet. The POWER indicator turns red. Press the ON/STAND-BY button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start to operate. The preparation display appears on the screen and the count down ...
Page 21 - Turning Off the Projector
Basic Operation Press the ON/STAND-BY button on the top control or on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of the...
Page 22 - Item data; How to Operate the On-Screen Menu; Quit; • The selected item is not active until the SELECT button is; SELECT button
Basic Operation Menu bar Pointer(red frame) Menu icon Item data Press the Point 7 8 buttons to adjust the value. SELECT button Pointer (red frame) Press the Point ed buttons to move the pointer. Item How to Operate the On-Screen Menu On-Screen Menu Quit Exit this menu. The projector can be adjusted ...
Page 23 - For computer source
Basic Operation Menu Bar e PC System Menu Used to select the computer system (p.28). y Image Adjust Menu Used to adjust the computer image from Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness, and Gamma (pp.34-35). o Setting Menu Used to set the projector’s operating configuratio...
Page 24 - Keystone Correction; Remote Control; Focus Adjustment; Top Control; Zoom Adjustment; Top Control
Basic Operation Adjust the lens focus with the focus lever. Focus Lever •The arrows are white when there is no correction.•The direction of the arrow which are being corrected turns red. •The arrows disappear at the maximum correction.•If you press the KEYSTONE button on the top control or on the re...
Page 25 - • See the next page for the description of; Volume; Mute; Sound Adjustment
Basic Operation / Remote Control Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER/VIDEO button ✔ Note: • See the next ...
Page 26 - • See the previous page for the description
Basic Operation / CEILING Remote Control D.ZOOM buttons NO SHOW button AUTO PC button ✔ Note: • See the previous page for the description of other buttons. KEySTONE button (See page 24.) POINT ed buttons black out ➜ the captured image ➜ normal ➜ • • • • • Press the NO SHOW button to black out the im...
Page 27 - Computer 1; Input Source Selection; Computer Input; • Computer 2 is not displayed when the COMPUTER IN 2/; Computer
Press the INPUT button on the top control or the COMPUTER button on the remote control to select either Computer 1 or Computer 2. Before using the INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Press the MENU button to display the On-Screen Menu...
Page 28 - PC System Menu; Computer System Selection; Auto
Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon The selected system is displayed. Available system selection. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC...
Page 29 - PC Adjust Menu; To store the adjusted parameters; • Fine sync, Total dots, Horizontal, and Vertical positions of; Auto PC Adjustment; Menu Operation; Direct Operation
Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical positions to conform to your computer. Move the red frame pointer to the Auto PC Adj. item and press the SELECT button. “Please wait...” appears while Auto PC adjustment is ...
Page 30 - Manual PC Adjustment
Computer Input Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box...
Page 32 - Image Level Selection
Computer Input Select an image level from among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, or Image 4 with the IMAGE button on the remote control. IMAGE button Dynamic Real Image 1 Image 2 Image 3 Normal picture level preset on the projector. Picture level wi...
Page 34 - Image Level Adjustment; • After adjusting the White balance Red,
Computer Input Use the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the...
Page 35 - Screen Size Adjustment; 080i is selected in the PC System Menu
Computer Input Store Exit the Image Adjust Menu. Quit To store the adjusted data, select “Store” and press the SELECT button. The Image Level Menu appears. Use the Point ed buttons to choose one of the four image level and press the SELECT button. A confirmation box appears and then select “Yes.” Th...
Page 36 - Digital zoom –; For zooming in and out the images; • The panning function may not operate
Computer Input When Digital zoom + is selected, the On-Screen Menu disappears and “D. zoom +” is displayed. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected im...
Page 37 - VIDEO; Video Input; Video
Press the INPUT button on the top control or VIDEO button on the remote control to select “Video.” Before using the INPUT or VIDEO buttons, select the correct input source through menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to mov...
Page 39 - • The AV System Menu cannot be selected when selecting
Video Input Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 1 Video System Selection AV System Menu (Video or S-Video) AV System Menu (Component) Use the Point ed buttons to move the red arrow pointer to the des...
Page 42 - Image Adjust Menu; Color; • The Tint cannot be selected when the video system is
Video Input Use the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SEL...
Page 43 - • Noise reduction and Progressive cannot be selected
43 Video Input To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select “Yes.” Stored data can be called up by selecting “Image” in the Image Level Selectio...
Page 44 - Screen Menu; Wide
44 Video Input This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons and move the red frame p...
Page 45 - Setting; Zoom
45 Keystone Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Poli...
Page 46 - • Sometimes, the brightness uniformity can not be
46 Display Blue back Press the Point 7 8 buttons to switch on/off. When this function is “On,” a blue image is displayed while the input signal is not detected. Press the Point 7 8 buttons to switch on/off. This function decides to display the On-Screen Displays. On ………………… Display all the On-Screen...
Page 47 - Capture
47 Setting Capture This function enables you to capture the image being projected and use it for a start-up display or interval of presentations. After capturing the projected image, go to the Logo select function and set it to “User.” Then the captured image is displayed when the projector is turne...
Page 48 - Logo PIN code lock Dialog Box; Enter a Logo PIN code; Change the Logo PIN code; Logo PIN code lock
48 Logo PIN code lock Dialog Box Enter a Logo PIN code Select a number by pressing the Point ed buttons. And then press the Point 8 button to fix the number and move the pointer. The number changes to " ✳ ". If you fixed an incorrect number, move the pointer to the number you want to correct...
Page 50 - Power management; • Be sure to turn the projector off properly (see “Turning Off; Lamp control
50 Setting Time left before Lamp is off. Press the SELECT button at Power management and this box appears. Select one of three settings with the Point 7 8 buttons, and go to the timer with the Point ed buttons and set time with the Point 7 8 buttons. Power management On start Power management For re...
Page 52 - PIN code lock
52 52 Setting PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off…… The projector is not locked with the PIN code. On1…… Requires to enter a PIN code every time turning on the projector. On2…… Req...
Page 53 - Change the PIN code; Change the PIN code lock setting; Fan; Standby mode; When “Eco” is selected, it is only
53 53 Setting The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d button, and press the SELECT button to display the New PIN code input dialog box. Select a number by pressing the Point ed buttons. And then press the Point 8 button to fix ...
Page 55 - Indicators; Warning Indicator; • The WARNING TEMP. indicator continues to blink even; Then check the matters below:; The projector is shut down and the WARNING; Maintenance and Cleaning
55 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. Indicators Warning Indicator The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temper...
Page 56 - • When cleaning the air filter, protect the; Cleaning the Air Filter; Resetting the Filter Counter
Maintenance and Cleaning 56 Turn off the projector, and unplug the AC power cord from the AC outlet.Turn over the projector and remove the air filter by pulling the latches upward. 12 The air filter prevents dust from accumulating on the surface of the optical elements inside the projector. Should t...
Page 58 - ORDER REPLACEMENT LAMP; Reset the lamp counter.; Lamp Replacement; • The Lamp replacement icon will not appear when the
58 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on t...
Page 59 - LAMP HANDLING PRECAUTIONS; Lamp Replacement Counter; • Do not reset the Lamp replacement counter without
Maintenance and Cleaning Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on and press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move t...
Page 60 - Troubleshooting; Appendix; – Solutions
60 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 16-18. – Make sure all equipment is connected to the AC outlet and the power is turned...
Page 61 - Is the image projected? You will hear the sound only when the
61 Appendix Image is out of focus. – Adjust focus of the projector (see page 24).– Provide proper distance between the projector and the projection screen (see page 14). – Check the projection window to see if it needs cleaning (see page 57).– Moving the projector from a cool to warm place may resul...
Page 62 - appears on the screen; how to obtain service.
62 Appendix The CE Mark is a Directive conformity mark of the European Community (EC). The Remote Control does not work. – Check the batteries.– Make sure no obstruction is between the projector and the remote control. – Make sure you are not too far from the projector when using the remote control....
Page 63 - Sound
63 Appendix Menu Tree Mode 1Mode 2SVGA 1 - - - - Computer Input ✽ Systems displayed in the System Menu vary depending on an input signal. Computer Input/Video Input Sound VolumeMuteQuit On / Off Sound 0 - 63 Input Computer 2 Video Auto Go to System (3) Go to System (3) Video Go to System (2) or (3) ...
Page 65 - Projector Condition; The projector is operating normally.
65 Indicators Projector Condition POWER red/green WARNING TEMP. red WARNING FILTER orange LAMP REPLACE yellow The projector is off. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling i...
Page 66 - The projector is detecting abnormal condition.; LAMP REPLACE
66 The projector is detecting abnormal condition. Indicators Projector Condition POWER red/green WARNING TEMP. red WARNING FILTER orange LAMP REPLACE yellow The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the te...
Page 67 - and less than 140 MHz of Dot Clock.
67 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAy RESOLUTION H-Freq. (kHz) V-Freq. (...
Page 69 - The specifications are subject to change without notice.; Accessories
69 Appendix The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Optional Parts ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.9...
Page 70 - SERVICE PORT CONNECTOR; Configurations of Terminals; Dimensions
70 Appendix Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR R X D ---------- GND RTS / CTS GNDGND Serial 12345678 COMPUTER INPUT / MONITOR OUTPUT TERMINAL (ANALOG)Terminal : Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red Input / Ou...
Page 71 - the factory set number will be invalid.; Logo PIN Code Lock No.; Put the label below (supplied) to a prominent place of the
71 Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the ...
