Page 2 - Features and Design
Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design This...
Page 3 - Table of Contents; Trademarks
3 Table of Contents Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .Table of Contents . . . . . . . . . . . . . . . . . . . . . .3To the Owner . . . ....
Page 4 - To the Owner; RISK OF ELECTRIC SHOCK; Safety Precaution; CAUTION; READ AND KEEP THIS OwNER'S MANUAL FOR; CAUTION
4 To the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITH...
Page 5 - Safety Instructions; NOTE FOR CUSTOMERS IN THE US
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth fo...
Page 6 - Moving the Projector; Installing the Projector in Proper Position; CAUTION IN CARRyING OR TRANSPORTING
6 Safety Instructions Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the f...
Page 7 - Compliance; Federal Communications Commission Notice; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; AC Power Cord for the United Kingdom:; wARNING: THIS APPARATUS MUST BE EARTHED .
7 Safety Instructions Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen...
Page 8 - Part Names and Functions; Front; Bottom
8 Part Names and Functions ⑤ ⑦ ⑧ ③ ② Front Back ⑥ ① Top controls and Indicators ② Zoom Ring ③ Focus Ring ④ Speaker ⑤ Infrared Remote Receiver ⑥ Projection Lens ⑦ Lens Cap (See page 61 for attaching.) ⑧ Air Intake Vent ⑨ Lamp Cover ⑩ Terminals and Connectors ⑪ LAN Connection Terminal ⑫ Power Cord Con...
Page 9 - AUDIO IN
9 ⑦ Part Names and Functions Rear Terminal ② ③ ① ④ ⑥ ⑦ ⑤ ⑦ AUDIO IN （ Video) Connect the audio output signal from video equipment connected to ⑤ to this jack. For a mono audio signal (a single audio jack), connect it to L(MONO) jack. (pp.14-16). ⑤ VIDEO IN Connect the composite video output signal t...
Page 11 - Remote Control
11 Part Names and Functions ✔ Note: To ensure safe operation, please observe the following precautions: – Do not bend, drop or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any chemical material. Remote Control ⑦ ⑭ ⑩ ⑳ ④...
Page 12 - Two AAA size batteries; Remote Control Operating Range; Code; Remote Control Code
1 Part Names and Functions To ensure safe operation, please observe the following precautions : ● Use two (2) AAA or LR03 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote cont...
Page 13 - Positioning the Projector; Installation
13 Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Installation ✔ Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to o...
Page 14 - Cables used for connection; • Audio Cables
14 Installation Connecting to a Computer Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection • VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.) • Audio Cables (*One cable is supplied; other cables ar...
Page 15 - • Video Cable
15 Installation Connecting to Video Equipment Cables used for connection • Video Cable • S-Video Cable • S-Video-VGA Cable • Audio Cables (Cables are not supplied with the projector. ) ✔ Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 73 for or...
Page 16 - • See page 73 for ordering optional cables.
16 Installation Connecting to Component Video and RGB (Scart) Equipment ✔ Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 73 for ordering optional cables. Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component...
Page 17 - Note; NOTE ON THE POwER CORD; Projector side; For Continental Europe
17 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not p...
Page 18 - Turning On the Projector; Selected Input Source and Lamp Control; Basic Operation; Off; Video / PC selection window
18 The preparation display will disappear after 30 seconds. (See page 53 for Lamp control status.) Turning On the Projector Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 8, 61).Press the ON/STAND-BY button on the top control or ...
Page 19 - Enter a PIN code; Set; CAUTION ON HANDLING PIN CODE; PIN Code Input Dialog Box
19 what is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Settin...
Page 20 - Turning Off the Projector; On; Direct OFF Function
0 TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. Power off? disappears after 4 seconds. Turning Off the Projector Press the ON/STAND-BY button on the top control or on the remote control, and Power off? appears on the screen.Press ...
Page 21 - Top Control
1 Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to...
Page 22 - ƘƘƘ; Menu Bar; For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Computer 1 RGBComputer 2 RGBVideo ► ƘƘƘ Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 68-69. Basic Operation ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ③ Image select For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) , Col...
Page 23 - Auto Setup Function
3 Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, corr...
Page 24 - Sound Adjustment; Menu Operation; Direct Operation
4 Sound Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound . Press the Point ► or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box...
Page 25 - LAMP button
5 Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT buttons...
Page 26 - NO SHOw button; No show; SCREEN button; black out → captured image → normal →
6 Basic Operation NO SHOw button Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.51 for detail of Setting for the P-timer function. To stop the count time, press the P-TIMER button. To cancel the P-timer function, press and hold the P-TIMER butt...
Page 27 - Input Menu; Computer Input; COMPUTER 1 button; Computer; Input; COMPUTER button
7 Choose either Computer 1(RGB) or Computer (RGB) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu 3 Computer Input COMPUTER 1 button ✔ Note: When the Inp...
Page 28 - PC System Menu; Computer System Selection; Auto; Selecting Computer System Manually; Mode
8 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes ...
Page 29 - PC adjust Menu; Auto PC Adjustment; Auto PC
9 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync , Total dots , Horizontal and Vertical positions to conform to your computer. PC adjust Menu Auto PC Adjustment To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored ...
Page 30 - Manual PC Adjustment
30 Computer Input PC adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent ...
Page 31 - Total dots
31 Computer Input Store To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. Mode free To clear the stored data, select Mode free and then press the Point...
Page 32 - Image select Menu; Image Mode Selection
3 Computer Input Image select Menu IMAGE button Dynamic Real Image 1 Image Image 3 Image Mode Selection Image 4 Blackboard(Green) Standard Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Blackboard (Green) , Colorboard , Image 1 , Image , Image 3 and Image...
Page 33 - Image Adjust Menu; Image Adjustment
33 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to disp...
Page 34 - Screen Menu; Screen Size Adjustment; ►or the SELECT button. Use the Point; yes
34 Computer Input Store This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger or sma...
Page 35 - For zooming in and out the images; Normal
35 Computer Input Select Digital zoom + . The On-Screen Menu disappears and D . zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be al...
Page 36 - Video Input; VIDEO button
36 Choose Video or S-video by pressing the VIDEO or the S- VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. 1 Input Menu Input Source Selection (Video, S-video) Video Input Direct Operation When video i...
Page 37 - COMPONENT button
37 Video Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu Use the Point ▲▼ buttons to select Co...
Page 38 - Component
38 Video Input Video System Selection 1 AV System Menu (Video or S-video) AV System Menu (Component) If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL , SECAM , NTSC , NTSC 4 .43 , PAL-M , and PAL-N . PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N T...
Page 41 - Store Menu
41 Video Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced vide...
Page 43 - Setting; Setting Menu
43 Setting Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items. 1 Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT but...
Page 44 - Auto setup
44 Setting ✔ Note: • Auto Keystone corrects vertical distortion only, not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.49). • Perfect correction of the image distortion cannot be ensured with the Auto setup function...
Page 45 - appears on the screen. Use the Point ▲▼
45 Setting Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone To correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ▲▼ buttons to correct keysto...
Page 46 - Logo select
46 Setting Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select , capture , Logo PIN code lock and Logo PIN code change functions. ✔ Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functio...
Page 47 - Capture
47 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image. After capturing the project...
Page 48 - Enter a Logo PIN code; Change the Logo PIN code lock setting
48 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to ✳ . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to...
Page 49 - Ceiling
49 Setting Ceiling Rear Ceiling When this function is set to On , the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On , the picture will be left/right reversed. This function is use...
Page 50 - Power management
50 Setting Time left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready ................
Page 53 - Lamp control; Remote control
53 Setting Remote control This function allows you to change brightness of the screen. Lamp control Lamp control ✔ Note: • Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the...
Page 54 - Key lock; PIN code lock
54 Setting Key lock Key lock Security (Key lock and PIN code lock) PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons.Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼ buttons....
Page 55 - Change the PIN code lock setting; Change the PIN code
55 Setting Use the Point ▲▼ buttons to select Off , On1 or On , and then press the SELECT button to make a choice. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄ ► buttons to fix the number and move the red frame pointer to the next bo...
Page 56 - Lamp counter; When you want to make a digital processing of a projected
56 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L ...... Slower and lower-sound than the normal operation ( L1 ), but it takes more time to cool the projector down. Fan Choose the running speed...
Page 57 - Factory default; Timer
57 Setting Factory default This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default warning log This function records anomalous operations while the projector is in operat...
Page 58 - Information; Input Source Information Display; Information Menu
58 Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. H-sync freq . V-sync freq . Lamp counter Information Menu The horizontal frequency of the input signal is displayed in KHz , or...
Page 59 - wARNING indicator; Maintenance and Cleaning; Then check the matters below:
59 Information The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. wARNING indicator The projector is shut down and the wARNING indicator is blinking red . When the temperatur...
Page 60 - Filter counter; Cleaning the Filters
60 Maintenance and Cleaning Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. I...
Page 62 - Lamp Replacement; LAMP REPLACE; Lamp replacement icon; Reset the lamp replacement counter .
6 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on th...
Page 63 - than other similar lamps.; LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP; information to the dealer.; Model No . of your projector
63 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp li�e ma�� di��er �rom lamp to lamp and according to the en�ironment o� use. There is no guarantee Lamp...
Page 64 - Appendix; Troubleshooting
64 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 18. – Chec...
Page 70 - Projector Condition; Indicators; Indicators and Projector Condition
70 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. ✽ When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 56, 62) The...
Page 71 - and less than 140 MHz of Dot Clock.; The specifications are subject to change without notice.
71 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAy RESOLUTION H-Freq . (KHz) V-Freq ....
Page 73 - Soft Carrying Case; Optional Parts; Accessories
73 Appendix Model No. COMPONENT-VGA Cable : POA-CA-COMPVGA S-video-VGA Cable : POA-CA-VGAS SCART-VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 Soft Carrying Case : POA-CAC-VCL2 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to...
Page 74 - conformance with PJLink Standard Class 1.; Pj Link Notice
74 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the...
Page 75 - LAN TERMINAL
75 Appendix COMPUTER IN 1 / S-VIDEO IN / COMPONENT IN Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red/Cr/S-C Input Ground (Horiz.sync.) Green/Y/S-Y Input ----- Blue/Cb/--- Input Ground (Red)Ground (Green)Ground (Blue) 1 5 4 3 678 +5V Power...
Page 76 - Put the label below (supplied) on in a prominent place of the; Logo PIN Code Lock No .; the factory set number will be invalid.
76 Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label...
