Page 2 - EN-1; To the Owner; Safety Precaution; CAUTION
EN-1 To the Owner Before operating this projector, read this manualthoroughly and operate the projector properly.This projector provides many convenientfeatures and functions. Operating the projectorproperly enables you to manage those featuresand maintains it in better condition for aconsiderable t...
Page 3 - Voor de klanten in Nederland
EN-2 NL Your SANYO product is designedand manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed ofseparately from your householdwaste. Please dispose of this equip...
Page 4 - EN-3; Safety Instructions
EN-3 Safety Instructions All the safety and operating instructions should beread before the product is operated.Read all of the instructions given here and retainthem for later use. Unplug this projector from ACpower supply before cleaning. Do not use liquid oraerosol cleaners. Use a damp cloth for ...
Page 5 - Air Circulation; Installing the Projector in Proper Position; USE CAUTION IN CARRYING OR
EN-4 Air Circulation Openings in the cabinet are provided forventilation and to ensure reliable operation ofthe product and to protect it from overheating,and these openings must not be blocked orcovered. CAUTION Hot air is exhausted from the exhaust vent.When using or installing the projector, thef...
Page 6 - EN-5; Compliance; Federal Communications Commission Notice; AC Power Cord Requirement; AC Power Cord for the United Kingdom:
EN-5 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residenti...
Page 7 - Notes on the AC Power Cord
EN-6 Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Pleaseconfirm your AC plug type with the graphics below and ensure that the proper AC Power Cord isused. If the supplied AC Power Cord does not match your AC outlet, please contact your...
Page 8 - EN-7; CONTENTS
EN-7 CONTENTS CONTENTS .......................................................................................................................... 7Introduction .........................................................................................................................8 Projector Feature...
Page 9 - Introduction; Projector Features
EN-8 Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design todeliver high reliability and ease of use.The projector offers the following features: Single chip 0.55" Texas Instruments DLP ® technology SVGA (800 x 600 p...
Page 10 - EN-9; Package Contents
EN-9 Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) (USA: J2552-0109-00) (UK: J2552-0108-00) (J2552-0072-03) (Europe: J2552-0107-00) Remote Control (IR) Owner’s Manual Quick Start Guide Save ...
Page 11 - Projector Overview; Front View
EN-10 Projector Overview Front View Lens cap Ventilation holes Elevator button AC power socket Lens cap strap Zoom ring Projection lens Focus ring Front IR remote control sensor Control panel Speaker Lamp cover 11 12 9 10 7 1 3 2 4 6 8 5 1 7 2 8 3 9 4 10 5 11 6 12
Page 12 - EN-11; Rear View; Connection ports; Bottom View; Elevator foot
EN-11 Rear View Connection ports Kensington lockRear IR remote control sensorVentilation holes Bottom View Elevator foot Ceiling mount (3-M4*6)Tilt-adjustment foot 1 3 2 4 1 2 3 4 1 2 3 1 2 3 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the pack...
Page 13 - Using the Product; Control Panel; LED
EN-12 Using the Product Control Panel LED Button Function LAMP (Lamp LED indicator) Refer to “LED Indicator Messages”. TEMP (Temperature LED indicator) Refer to “LED Indicator Messages”. Four directional buttons Use four directional buttons to select items or make adjustments to your selection. ENTE...
Page 14 - EN-13; Connection Ports; AUDIO IN; COMPUTER IN / COMPONENT IN; Connect S-Video output from video equipment to this jack.; VIDEO IN; Connect composite video output from video equipment to this jack.; USB
EN-13 Connection Ports AUDIO IN Connect an audio output from video equipment to this jack. COMPUTER IN / COMPONENT IN Connect image input signal (Analog RGB or Component) to this jack. S-VIDEO IN Connect S-Video output from video equipment to this jack. VIDEO IN Connect composite video output from v...
Page 15 - Remote Control
EN-14 Remote Control INPUT Manually select an input source. AUTO PC Resynchronize the projector to the inputsignal from a computer. NO SHOW Hide the screen. Press again to cancel the NOSHOW function. FREEZE Press “FREEZE” to pause the screen image.Press again to cancel the FREEZE function. VOLUME + ...
Page 16 - EN-15; Replacing the Battery; Remove the battery holder.
EN-15 Replacing the Battery For the first time use:Remove the transparent insulation tape by pulling it before use. For battery change: 1. Remove the battery holder. 2. Remove the old Lithium coin cell and install new one (CR2025). Ensurethat the side with the mark "+" is up. 3. Push the bat...
Page 17 - Remote Control Operation; Operating the projector from the front
EN-16 Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear 15 15 7m 15 15 7m The remote control may not operate when there is sunlight or other strong light such as a flu...
Page 18 - EN-17; Installation; Connecting the Projector; Audio Cable; Composite Video Cable
EN-17 Installation Connecting the Projector Audio Cable VGA (D-SUB) to HDTV (RCA) Cable VGA Cable (D-Sub to D-Sub) (supplied) S-Video Cable USB Cable Composite Video Cable 1 4 2 5 3 6 Desktop type Laptop type 3 5 2 6 1 1 4 When connecting cable, power cords of both a projector and external equipme...
Page 19 - Powering On/Off the Projector; Powering On the Projector:; INPUT; Powering Off the Projector:
EN-18 Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press I/ button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, not...
Page 20 - EN-19; Adjusting the Projector; Adjusting the Projector Height; Adjust the image by sliding the zoom ring.; Focus ring
EN-19 Adjusting the Projector Adjusting the Projector Height The projector is equipped with an elevator foot to adjust the image height.To raise or lower the image:1. To raise or lower the image, press the elevator button and raise or lower the front of theprojector. Release the button to lock the a...
Page 21 - Adjusting Projection Image Size
EN-20 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Projection Distance (meters) Screen Size (for 4:3 aspect ratio diagonal length) Wide (inches) Tele (inches) 1.2 30.6 27.8 2 51.0 46.4 3 76.5 69.5 5 127.5 115.9 10 255.0 23...
Page 22 - EN-21; Menu Operation
EN-21 Menu Operation The projector has multilingual on-screen display menus that allow you to make imageadjustments and change a variety of settings. Picture Computer Image Contrast Keystone White Intensity Gamma Brightness 0 - 100 Color Temp LOW, MID, HIGH, User 0 - 100 -20-+20 Aspect 1:1, 4:3, 16:...
Page 23 - How to operate
EN-22 How to operate 1. Press the Menu button on the control panel or the MENU button on the remote control to open the OSD menu. 2. When OSD is displayed, use S / T to select any feature in the main menu. 3. After selecting the desired main menu feature, press X to enter sub-menu for feature settin...
Page 24 - EN-23
EN-23 Computer Image (Computer Mode) Total dots Adjust the timing of the projector relative to the computer. Fine sync Adjust the phase of the projector relative to the computer. H Position (Horizontal Position) Adjust the image left or right within the projection area. V Position (Vertical Position...
Page 25 - Select the language used by the on-screen menu.
EN-24 ECO Mode Use this function to dim the projector lamp light output which will lower power consumption andincrease lamp life. Highland Turning on Highland mode operates the fans at full speed continuously to allow for proper highaltitude cooling of the projector. OSD Timeout Duration OSD menu st...
Page 26 - EN-25; Maintenance; Cleaning the Lens
EN-25 Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spotswill project on the screen and diminish image quality. If any other parts need replacing, contactyour dealer or qualified service personnel. When cleaning any part of the projector, alwayss...
Page 27 - Replacing the Lamp; LED Indicator; ” for further details.
EN-26 Replacing the Lamp As the projector operates over time, the brightness of the projector lamp gradually decreasesand the lamp becomes more susceptible to breakage. We recommend replacing the lamp if awarning message is displayed. Do not attempt to replace the lamp yourself. Contact the qualifie...
Page 28 - EN-27; Turn off the projector.; ORDER REPLACEMENT LAMP; Model No. of your projector
EN-27 1. Turn off the projector. 2. If the projector is installed in a ceiling mount, remove it from the mount. 3. Unplug the power cord. 4. Loosen the screw in the side of the lamp cover and remove the cover. 5. Remove the screws from the lamp module, raise the handle, and lift out the module. 6. I...
Page 29 - Specifications
EN-28 Specifications Remote Control Display Type Single 0.55" DLP ® chip, 5-segment color wheel Resolution (Pixels) SVGA (800 × 600) Lens Manual Zoom (1.1x) Screen Size 30” – 300” Lamp 180W Input Source D-Sub 15 pin, S-video, composite video, USBAUDIO IN (stereo phone jack), 2W x 1 Video Compati...
Page 30 - EN-29; Appendix; LED Indicator Messages; Optional Parts; Soft Carrying Case
EN-29 Appendix LED Indicator Messages LED Type Color Status Meaning LAMP LEDTEMP LED Green Off Flash - The projector is in standby mode. LAMP LEDTEMP LED GreenGreen Solid Flash The projector system has some problems with itsfan, so the projector cannot start up. LAMP LEDTEMP LED GreenGreen SolidSoli...
Page 31 - Compatibility Modes
EN-30 Compatibility Modes Computer: Video: Compatibility Resolution H-Sync [KHz] V-Sync [Hz] VGA 640 x 480 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 SVGA 800 x 600 35.2 56.3 37.9 60.3 48.1 72.2 46.9 75.0 53.7 85.1 XGA 1024 x 768 48.4 60.0 56.5 70.1 60.0 75.0 68.7 85.0 SXGA 1152 x 864 64.0 70.0 67.5 75...
Page 32 - EN-31; Troubleshooting; Image problems; Computer Image; Remote control problems
EN-31 Troubleshooting Refer to the symptoms and measures listed below before sending the projector forrepairs. If theproblem persists, contact your local reseller or service center. Please refer to "IndicatorMessages" as well. Start-up problems If no lights turn on: Be sure that the power ...
