Page 2 - TABLE OF CONTENTS; Flash time ...........................................................................12
2 TABLE OF CONTENTS INTRODUCTION ................................................................................................. 4 GETTING STARTED........................................................................................... 5 Checking package contents ...................................
Page 3 - RECYCLING NICKEL-METAL HYDRIDE BATTERIES...............................25; CAUSES OF POOR RECEPTION
3 TABLE OF CONTENTS Caller ID list ....................................................................................... 17 Reviewing Caller ID list...................................................................... 17 Deleting entries from the Caller ID list.......................................
Page 4 - INTRODUCTION; Main Features; Superior Range; COMPANDER PLUS Noise Reduction
4 INTRODUCTION Congratulations on your purchase of this Sanyo digital cordless telephone.Your Sanyo 2.4 GHz digital cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment. With proper m...
Page 5 - GETTING STARTED; Checking package contents; Installation tips
5 GETTING STARTED Checking package contents Make sure your package includes the items shown here. Base unit Handset cradle 2 x Handsets 2 x AC Adaptors (PI-41-735US) (A10920) 2 x Belt clips Telephone line cord 2 x Batteries Battery order sheet Modular jack You need an RJ11 type modular phone jack. I...
Page 6 - Choosing a location for the base unit and handset cradle; the adapter to make sure you are using the right one.
6 GETTING STARTED Choosing a location for the base unit and handset cradle The base unit records and displays the indoor temperature, when selecting a location, observe the following guidelines: Choose a location that provides easy access to a 120-volt AC power source. Choose a location that w...
Page 7 - Connecting the handset cradle; Plug the battery connector into the socket.
7 GETTING STARTED Connecting the handset cradle Batteries 1. Open the battery compartment located at the back of the handset unit. 2. Plug the battery connector into the socket. 3. Replace the battery compartment by sliding it in the direction shown by the arrow in the diagram to the right. The lid ...
Page 8 - Charging the handset batteries; CHARGE
8 GETTING STARTED Charging the handset batteries You must charge the handset batteries for 15 continuous hours the first time you use them. NOTE: When the icon appears empty and “CHARGE BATTERY” shows on the LCD screen, or if you hear a warning beep during a call, please: End the call as soon as ...
Page 9 - NAMES AND CONTROLS; Handset; Earpiece
9 NAMES AND CONTROLS Handset 1. Earpiece 8. REDIAL/PAUSE 2. Display 9. ( C ) Cancel / MUTE 3. Up ( ) / Volume up / phone book 10. INT (intercom) 4. MENU/OK 11. Down ( )/CID REVIEW 5. Headset jack (head set optional) 12. # 6. TALK 13. FLASH/DEL 7. *TONE 14. Microphone
Page 10 - Base unit; PAGE key
10 NAMES AND CONTROLS Base unit 1. PAGE key 2. Charging contacts 3. CHARGE/IN USE LED
Page 11 - INITIAL PROGRAMMING; Language; Storing a name / number in the directory; Dial mode
11 INITIAL PROGRAMMING Before using this telephone, the following initial settings must be completed: volume level, ring volume, ring tone, auto answer, key tone, key lock, handset name, language, phone book, call log, message waiting, and dial mode. The last 4 settings are stored on the base unit a...
Page 12 - Flash time; TALK; Key tone
12 INITIAL PROGRAMMING Flash time Consult your telephone company before changing the Flash time setting. Changingthis setting may cause your telephone company service such as call waiting to not work properly.1. Press the MENU/OK key. 2. Press or to select “DIALING” from the options. 3. Press the ME...
Page 13 - Handset ring volume level
13 INITIAL PROGRAMMING 1. Press the MENU/OK key. 2. Press or to select “RING PATTERN” from the options, 3. Press MENU/OK to select. 4. Select the ring tone you wish to change (internal or external) by pressing or . 5. Press MENU/OK to enter the ring tone selection submenu. 6. Press or or number keys...
Page 14 - Clear message waiting; BASICS; Handset name; Standby mode; Auto answer
14 INITIAL PROGRAMMING Clear message waiting 1. Press the MENU/OK key. 2. Press or to select “CLEAR MSG WAIT”. 3. Press MENU/OK . The screen will show “CONFIRM?” 4. Press MENU/OK again to confirm or press C repeatedly to return to standby mode. BASICS When you first set your unit up, you may hear a ...
Page 15 - Making a call
15 BASICS Making a call 1. Press TALK to get a dial tone then enter the number, OR dial the number first (up to 24 digits) then press TALK . 2. To end the call, press TALK again or place the handset on the base cradle, the handset will automatically hang up. “ENDED” will appear on the display to con...
Page 16 - MUTE key “C”; PAGE; Low battery warning
16 BASICS MUTE key “C” To have a private, off-line conversation, use the mute feature. The caller on the other end of the line cannot hear you, but you will be able to hear them. To mute the microphone: 1. While a call is in progress, press C on the handset “MIC MUTE” will appear on the handset disp...
Page 17 - CALLER ID FEATURES; Caller ID with Call Waiting; Caller ID list
17 CALLER ID FEATURES This phone receives and displays incoming call information transmitted by your local phone company, provided you subscribe to Voice Mail, Caller ID, and/or Call Waiting services. This information can include the phone number and/or the name, date and time. The phone can store u...
Page 18 - Deleting entries from the Caller ID list; Deleting the displayed entry:; DIRECTORY; NOTE
18 CALLER ID FEATURES 1. Press MENU/OK to enter the menu. 2. Press MENU/OK to select “CALL LOG”. 3. Press to scroll through the Caller ID list from the most recent to the oldest. 4. Press to scroll through the Caller ID list from the oldest to the most recent. 5. Press C to exit the call log. Tip: 1...
Page 19 - Key; Note
19 2. Press or select “PHONEBOOK”, then press MENU/OK . DIRECTORY 3. Press or select “STORE”, then press MENU/OK . 4. At the “STORE NUMBER” display, enter number using the keypad, including any prefixes or country codes. If you make a mistake, press FLASH/DEL to delete a digit one at a time, then en...
Page 20 - Making calls from the directory; Deleting an entry
20 DIRECTORY Making calls from the directory 1. Press MENU/OK , Press or to select “PHONE BOOK”, then press MENU/OK . 2. Press or to select “RECALL”, then press MENU/OK. 3. Press or or enter the first character of the name to select the desired phonebook entry. 4. Press TALK to call. Tip: Press in s...
Page 21 - Registering a handset; Troubleshooting; Identifying a handset on the network
21 appears as 1-416-222-5555, but it is not a long distance number, press REDIAL/PAUSE key until it shows 416-222-5555 (without 1). DIRECTORY The REDIAL/PAUSE key lets you select how many digits of the number are displayed: 7 7-digit telephone number. 10 3-digit area code + 7-digit telephone number....
Page 22 - MULTI-HANDSET CONFIGURATION; Intercom ring tone; Handset Ring Tone Setting; Call toggling
22 This feature only works if you have 2 handsets registered to the base unit. MULTI-HANDSET CONFIGURATION 1. Press INT on the first handset. 2. Press or to select the desired handset or choose “CALL ALL”. 3. Press TALK to place the call. The selected handset will ring. If you select “CALL ALL”, all...
Page 23 - -way conference call; Caller ID with Call; Transferring call between handsets
23 MULTI-HANDSET CONFIGURATION 3-way conference call If you have 2 handsets registered with the base unit, you can make 3-way conference calls between an external call party and two internal handset holders. To initiate a 3-way conference call: 1. Establish contact with the external party by either ...
Page 24 - Call back; CHANGING THE HANDSET BATTERY; Battery replacement and handling
24 4. Then press TALK key on the first handset, and another handset will connect to the external line. If there is no answer, press INT again to return to the caller. OR MULTI-HANDSET CONFIGURATION 1. During a telephone conversation, press the INT key to place the caller on hold. 2. Press or to choo...
Page 25 - Replacing the battery; Getting started; RECYCLING NICKEL-METAL HYDRIDE BATTERIES; Headset connection (headset not included); Belt clip
25 Replacing the battery 1. Make sure the telephone is turned off. 2. Slide off the battery compartment cover. CHANGING THE HANDSET BATTERY 3. Disconnect the battery plug from the jack in the compartment and remove the battery pack. 4. Insert the new battery pack and connect the cord into the jack. ...
Page 27 - LIGHT SIGNALS; CHARGE/IN USE LED on the base
27 UNKNOWN # / NAME / CALLER Some or all of the Caller ID information was not sent with the call FORWARD CALL A call has been forwarded DELETE? Prompt asking you if you want to erase the current Caller ID entry or a directory entry that is shown on screen DELETE ALL? Prompt asking you if you want to...
Page 28 - No dial tone
28 Talking Lit steadily (red) Charging Lit steadily (green) Incoming call Flashes in same pattern as telephone ring (red) Voice mail Flashes every 2 seconds (red) No telephone line Flashes every 1 seconds (red) SOUND SIGNALS A long warbling tone Signals an incoming call Single tone A key is pressed ...
Page 29 - EXT IN USE; TROUBLESHOOTING; Handset does not ring; Call was disconnected; shows on screen; Phone beeps
29 Check the power connection by switching off the power at the main socket, waiting a few seconds, then switching it back on. Check to make sure that the phone and base unit are with in transmission range. The handset may be unable to find the base unit. Try moving the handset closer to th...
Page 30 - Cannot register handset; You may have already registered 4 handsets to the base unit.; Cannot dial out; symbol on the handset display area.; All handsets show “OUT OF SERVICE” and telephone will not work; CALLER ID; No Caller ID display; Is battery fully charged? Try recharging or replacing the battery
30 If you just recharged the batteries, but keep getting a low battery warning, the batteries may need to be replaced. Rechargeable batteries gradually lose their ability to store a charge the older they get. Replace the battery with a new one. MULTI-HANDSET USE Cannot register handset Sometimes ...
Page 32 - MAXIMIZE BATTERY PERFORMANCE; Do not replace the handset in the base after each call; Then charge it for 15 continuous hours.
32 The freedom that your cordless telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines: Charge the battery for a full 15 continuous hours Before initial use of your new battery, charge it fo...
Page 33 - TECHNICAL INFORMATION; CAUTION
33 TECHNICAL INFORMATION REN Number: The Ringer Equivalence Number (REN) assigned to each terminals device provides an indication of the maximum number of terminal allowed to be connected to a telephone interface. The REN number of this phone is located on the bottom of the base unit. The terminatio...
Page 34 - SANYO COMFORT WARRANTY; WARRANTY APPLICATION
34 equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of construction. In some cases...
Page 35 - STATUTORY WARRANTIES
35 warranted for the remaining portion of the warranty period. WHAT IS NOT COVERED a. Communications products purchased outside Canada. b. Communications products purchased in a used condition. c. Communications products purchased from non Sanyo-authorized dealer. d. Communications products not inte...
Page 36 - SOS HELP LINE; NATIONWIDE CUSTOMER SUPPORT; Customer; button to get access to our FAQ’s (Frequently Asked Questions); Consumers are responsible for the shipping costs of the unit back; GUARANTEED QUALITY; SOS means you never have to worry.
36 SOS HELP LINE At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your quest...
