Sanyo EM-S1000 - Manual - manualsarea.com

Page 3 - INSTALLATION

CONNECTING TO THE MAINS Before you use your oven, check that the voltage shownon the data label located on the face of the oven con-firms with your mains supply. The mains lead is fittedwith a non-removable moulded-on 13 amp plug contain-ing a 13 amp fuse. If the fuse requires replacing at anytime, ...

Page 4 - HOW TO USE YOUR MICROWAVE OVEN SAFELY (Important)

Although your oven is provided with safety features, it is important to observe the following: 1. Do not tamper with safety interlocks. 2. Do not place any object between the oven and the door or allow any food residue to accumulate on sealing surfaces. Wipe the door sealing area frequently with a m...

Page 5 - CARE OF YOUR MICROWAVE OVEN; How to clean the exhaust opening; Duct Cover

4. If the Control Panel becomes wet, clean with a soft, dry cloth. Do not use harsh detergents or abrasives on Control Panel. 5. If steam accumulates on both sides of the oven door, wipe with a soft cloth. This may occur when the micro- wave oven is operated under high humidity conditions and this i...

Page 6 - OVEN CONTROL PANEL

OVEN CONTROL PANEL 2 5 7 DISPLAY: 1. LED Display - Cooking time, power level, function indicators are displayed. KEYS: 2. Program Selection Keys - The unit is ready to begin operation as soon as the heating time has been programmed, using these ten keys (numbered 1 to 0). The time selected will be d...

Page 7 - MICROWAVE OVEN COOKING KNOW-HOW; Cooking times with quantity; Operational flow

MICROWAVE OVEN COOKING KNOW-HOW 1. Cooking times with quantity Input the cooking time that is appropriate to the quantity of foods being prepared.When heating double or triple quantity, use the appropriate multiple-quantity key. Note: Before use, the user should check that utensils are suitable for ...

Page 8 - Touch “Time” key

OPERATING INSTRUCTIONS (2) USING THE PROGRAM KEY FOR MEMORY STORAGE 1. Programmed (1-Stage) Cooking at maximum power. (Example) To program the following on program No. 3: ( Power Level ...max power for 30 seconds.) Note: The oven will automatically select max. power first. To select a lower power fo...

Page 10 - Ordinary Use; HEATING METHOD; Place food in oven

1. Ordinary Use (Example) When program No. 3 is programmed as:First stage ( Max power for 30 seconds.) and Second stage (Power Level 2 for 1 min.) OPERATING INSTRUCTIONS (4) HEATING METHOD Operational flow Display Window 1. 2. 3. Cooking time endsRemove the food from oven. Place food in oven Touch P...

Page 11 - POWER LEVEL LIST; POWER LEVEL; Manual Set

POWER LEVEL LIST POWER LEVEL (Input figure) max power (no input) 9876543210 POWER (W) EM-S1000 1000 900800700600500400300200100 0 Max. Input time Manual Set 10 min. 00 sec. ““““ 30 min. 00 sec. “““““ One Touch Course 6 min. 00 sec. ““““ 30 min. 00 sec “““““ NOTE: 1. A “beep” tone sounds whenever any...

Page 13 - Confirmation of Memory

PROGRAM (2-STAGE) COOKING (cont.) 2. Confirmation of Memory (Example) When program No.3 is programmed as: First stage (Max power for 30 seconds.) Second stage (Power Level 2 for 10 minutes.) Operational flow Display Window 1. 2. 4. Open door Touch number “3” Touch “Clear” key “0” will appear on the ...

Page 15 - INPUT OPTIONS

CHECKING ACCUMULATIVE COOKING TIME, NUMBER OF DOOR OPERATIONSAND CONTROL OF THE BUZZER SOUND (DOOR MUST BE CLOSED) Display shows accumulative cooking time or the number of door operations by key operation. Also, you canchange any remaining cooking time, buzzer sound or buzzer volume. Stages 1 to 3 a...

Page 16 - HOW TO CONFIRM THE FREQUENCY OF EACH COURSE USED

NOTE: The cancellation for the used No. can be done by inputting “0” when the display shows the number of timesused. When display shows “0000” flashing touch “Memory” key to finish the cancellation procedure. Operational flow Display Window “0” will appear on the display. 1. 2. 3. 4. 5. 6. 7. Touch ...

Sanyo EM-S1000 - Manual

Table of Contents:

Summary

Other Sanyo Models