Sanyo DV-S100 - Manual - manualsarea.com

Page 2 - Macrovision; Optical Digital Output for AV; Introduction

1 ■ Thank you for purchasing DV-S100.This unit has many features, including: ■ Composite Video output(Front + Rear) ■ FM Modulator (Included) ■ Remote Control (Included) In order to enjoy the features to their fullest and keep the unit in good workingorder for a long time, read this manual thoroughl...

Page 3 - Contents

2 Contents Before use Precautions for handling discs ..............................................................................3 How to use the magazine .....................................................................................3 Accessories................................................

Page 4 - until it locks; Notes: Be absolutely sure to close the door; Precautions for handling discs

3 ■ Dir t, dust, scratches and warpage cause sound skipsd u r i n g p l ay b a ck a n d d e t e r i o r a t i o n o f s o u n d a n d / o rpicture quality. How to take care of your discs: ■ Fingerprints and dust should be carefully wiped from the disc’s signal surface(glossy side) with a soft cloth....

Page 5 - Installation parts for Changer unit; Accessories

4 Smallbracket (L) x 1 x 1 x 2 x 6 x 4 Smallbracket (R) Nut(M6) Bracket (B) x 4 Hexagonal bolt(M6 x 20) Tapping screw(M5 x 12) x 4 x 1 DIN 8 pincable Hexagonal boltwith washer(M5 x 8) x 1 x 2 Doublesided tape Seals (A) x 1 Seals (B) Installation parts for Changer unit x 1 Largebracket (L) x 1 Largeb...

Page 6 - For safe and efficient operation

5 For safe and efficient operation ¡ This unit is designed to operate on + 12 volt DC negative ground electrical systemsonly. ¡ According to this manual, install and operate the unit. If you are not confident inyour ability to install the unit correctly, have it installed by a professional mobileele...

Page 7 - Playable discs; The following types of discs can be played on this unit.; Region number of this unit is “2”.; players with the same region number; Disc type & logo mark

6 Playable discs ■ The following types of discs can be played on this unit. ■ Region number (Regional restriction number) ■ PBC (Playback Control)-Compatible Video CDs This unit is compatible with PBC-compatible video CDs.In addition to typical audio and motion picture play, PBC-compatible video CDs...

Page 8 - Refer to the operation manuals of car stereo and monitor.

7 Before using the system (Power On) This system is designed to convert DVD Video/Video CD/Audio CD sound into FMsignals (88.9 MHz or 88.3 MHz) and play them on the existing car stereo with FM. Note: As to wiring, see page 38, “Basic connection 1”. 1. Setting up for operation 1. Load the discs into ...

Page 9 - How to load the batteries; The following screen is displayed during audio CD play.; DISC; and

8 Remote control Audio CD Operation Screen ■ How to load the batteries 1 Press the battery coverdownward and pull. Caution: ¡ Do not use metal tweezers or anything similar to hold the battery since thismay cause short-circuiting. ¡ Do not disassemble batteries, subject them to excessive heat or put ...

Page 10 - Remote control light emitter; Cursor; Name & functions of each part

D V 9 q Power button w Subtitle button e Audio button r Repeat button t A-B repeat button y Number buttons u Clear button i Cursor buttons o Enter button !0 Skip buttons !1 Setup button !2 Stop button !3 Menu button !4 Title button !5 Time button !6 Angle button !7 Play mode button !8 Search button ...

Page 11 - Switching Off; Press the power button (; Refer to the operation manual of car stereo.; Press the stop button (; Stopping Play; To Stop Play; Press the pause button (

10 DVD VCD CD B A S I C O P E R A T I O N DVD VCD CD Switching Off Press the power button ( ). When switching the power on (beginning play) again, tune the FM radio receiver to88.9MHz or 88.3MHz (the frequency selected with the FM modulator frequencyselect switch), and press the power button ( ). Pl...

Page 12 - Selecting a Disc; Press a disc select button (; Empty disc trays are skipped during disc changing.; or; To advance to the next chapter or track, press (; Advancing / Returning to a Chapter or Track

D V 11 DVD VCD CD B A S I C O P E R A T I O N DVD VCD CD Selecting a Disc Press a disc select button ( or ). To proceed to the next disc, press ( ). To return to the previous disc, press ( ). Notes: ¡ Empty disc trays are skipped during disc changing. ¡ Discs can also be selected by displaying a lis...

Page 13 - Audio is not output during fast forward or fast reverse play.; Fast Playback; DVD and Video CD; Audio CD; To resume normal play

12 DVD B A S I C O P E R A T I O N DVD VCD CD D D During play, press a fast playback button ( or ). To fast forward: Press ( ). To fast reverse: Press ( ). Each activation of a fast playback button ( or ) switches between 2x, 4x, 8x, 15x, and 30x fast forward and fast reverse speeds. To decrease the...

Page 14 - Read the instruction manual for the disc used.; Using DVD Menus; The DVD menu is displayed.; Completing or Quitting DVD Menu Operations; Using PBC Playback; Example

V 13 DVD B A S I C O P E R A T I O N VCD Some DVDs include a recorded DVD menu. Notes: ¡ Some discs do not include a recorded DVD menu, and some have menusequivalent to title menus. ¡ Because DVD menus are recorded on the disc, their content differs according tothe disc. Menus may allow selection of...

Page 15 - If you make a mistake when entering a number, press the clear button (; To display the PBC menu during PBC playback; Stopping PBC Playback and Beginning Normal Play; ” at the upper right of the screen disappears.; Returning to PBC Playback From Normal Play; ” at the upper right of the screen appears.

14 VCD B A S I C O P E R A T I O N VCD D Using the PBC (Playback Control) Function (2) Notes: ¡ Perform the next operation before the display at the upper left of the screen(example: “ – – 1 ”) disappears. ¡ If you make a mistake when entering a number, press the clear button ( ) to clear the number...

Page 16 - Using Frame Advance Play and Slow Play; Using Frame Advance Play; Press the button again to play the images one frame at a time.; Using Slow Play; speed freezes the picture.; To return to normal play

D V 15 DVD VCD DVD VCD Notes: ¡ Audio is not output during frame advance play. ¡ Depending on the disc or its running position, the (“prohibited” logo) is displayed, and frame advance play cannot be performed. ¡ Images on some discs may be corrupted during frame advance play. ¡ The reverse skip butt...

Page 17 - Using Title Search, Chapter Search, Track Search, and Time Search; You can use the left/right cursor buttons (; While play information is displayed, use the search button (

16 DVD VCD D D Using Title Search, Chapter Search, Track Search, and Time Search Play can be started from a designated title, chapter, or track. Anelapsed time value can also be entered, and play can be started fromthat point. ¡ DVD play information display (Example) ¡ Video CD play information disp...

Page 18 - The audio language can also be changed from a DVD menu (; Switching the Audio Language; ) to select your preferred audio language.; Switching the Audio Output Method; Audio language display example; Video CD; Output method display example; Press the enter button (

D 17 DVD VCD CD Some DVD discs include multiple audio languages. In these instances,you can select a preferred audio language as follows. Notes: ¡ This operation is only possible with a disc storing multiple audio languages. ¡ The audio language can also be changed from a DVD menu ( z see page 13) o...

Page 19 - Switching the Subtitle Language; ) to select a preferred subtitle language or “Off” (when; Subtitle language display example; Switching the Angle; While the angle number is displayed, use the angle button (; When you press the angle button, the angle number switches.; Angle number display example

18 DVD DVD D Some DVD discs include recorded subtitles. In these instances, youcan select display or non-display of subtitles.Some discs also include multiple recorded subtitle languages. In theseinstances, you can select a preferred language. Notes: ¡ Subtitle language can only be switched when usi...

Page 20 - if a program list has not been created.; Using Scan Play, Random Play, and Program Play

19 CD CD Note:You cannot switch to if a program list has not been created. PROGRAM Play mode button ■ Scan play repeats a function in which track introductions on a discare played for approximately 10 seconds and play then moves to thenext track. ■ Random play plays tracks on the disc in a non-stand...

Page 22 - Use one of the following two methods.; To clear the last track number in a program list; DVD

D V 21 CD DVD VCD CD Creating a Program List (3) Use one of the following two methods. ¡ While the program list creation screen is displayed, press the clear button ( ). ¡ Clearing using the screen q On the program list creation screen, select . z See pages 19, 20, step . w Press the enter button ( ...

Page 23 - Select “Off” in step .; ) to illuminate the indicator for; This function allows repeating of a designated portion.; ” is displayed at the top of the screen.

22 DVD VCD CD DVD VCD CD D D Using Repeat Play (2) Select “Off” in step . To return to normal play During play, press the repeat button ( ) to illuminate the indicator for your preferred repeat mode ( , ). When the repeat button is pressed, the repeat mode switches as follows. TRACK DISC z See page ...

Page 24 - Press the list button (; The disc list screen appears.; Disc List; About Disc Lists

D V 23 DVD VCD CD DVD VCD CD Using A-B Repeat Play Mode (2) Press the A-B repeat button ( ). DVDs and Video CDs: “ ” is displayed at the top of the screen for approximately 1 second. Audio CDs: The “ ” indicator goes off. A-B A-B Off To return to normal play Return buttonList button Cursor buttons E...

Page 25 - To stop screen display of a Disc List; Displaying Running Time

24 DVD VCD DVD VCD CD D D Displaying a Disc List (2) Press the list button ( ) or the return button ( ). To stop screen display of a Disc List q Use the cursor buttons ( , , , ) to select the tray containing the desired disc from the disc list. The background of the selected tray changes toyellow. w...

Page 26 - CD; Switching the Type of Running Time Display; Performing Basic Operations for Setup Changes (1); Press the time button (; Operation screen

25 CD You can select the type of running time display shown on the audio CDoperation screen. Switching the Type of Running Time Display Time button 1 2 3 4 5 6 7 8 9 10 DISC RANDOM TRACK A-BSCAN PROGRAM Running time display When elapsed track time or remaining track time is shown, “T” is displayed.W...

Page 27 - Performing Basic Operations for Setup Changes (2); Press the return button (; Press the setup button (; To end or interrupt setup changes; You can change the display language for DVD menus (; see page 25) to display the setup screen.; The DVD menu language setup screen is displayed.

26 Performing Basic Operations for Setup Changes (2) Note:Settings are maintained until changed. Press the return button ( ) or the left cursor button ( ). To return to the previous selection screen during setup change operations q Press the setup button ( ). The screen with “ ” reappears. w Press t...

Page 28 - When set to “; ” and press the enter button (; The audio language setup screen is displayed.

27 You can change the DVD audio language. Changing the Audio Language (1) Changing the DVD Menu Language (2) Use the up/down cursor buttons ( , ) to select a desired language and press the enter button ( ). The setup screen reappears (with the “DVD Menu Language” settingchanged to the selected langu...

Page 29 - The subtitle language setup screen is displayed.

28 Changing the Audio Language (2) Use the up/down cursor buttons ( , ) to select a desired language and press the enter button ( ). The setup screen reappears (with the “Audio Language” setting changed tothe selected language). 3 Notes: ¡ When set to “ ”, a disc is played in the original language o...

Page 30 - ) to select a preferred; Select this option when a digital audio device; Select this option when a digital audio device; equipped with a; The digital output setup screen is displayed.

29 Changing the Subtitle Language (2) Use the up/down cursor buttons ( , ) to select a preferred subtitle language or “Off” (when hiding subtitles) and press theenter button ( ). The setup screen reappears (with the “Subtitle Language” setting changedto the selected language or “Off”). * When DTS-fo...

Page 31 - ) to select the audio; Caution; and press the enter button (; The display setup screen is displayed.

30 Changing the Digital Output (2) Use the up/down cursor buttons ( , ) to select the audio output (LPCM/Bitstream) and press the enter button ( ). The setup screen reappears (with the “Digital Output” setting changed to theselected audio output). 3 Caution Improper settings may cause noise harmful ...

Page 32 - The password registration screen is displayed.; ) to select an aspect; When using this unit for the first time

31 Some DVDs store parental levels. These discs allow you to restrictviewing and listening according to a parental level set with the player(this unit). Changing Parental Settings (1) Use the up/down cursor buttons ( , ) to select “ ” and press the enter button ( ). The password registration screen ...

Page 33 - A message screen is displayed.; A parental menu screen is displayed.; A level setting screen is displayed.; This Unit

Level 7 6 5 4 3 2 1 8 The level with the yellow background is the current setting. Password Please input password againfor confirmation. – – – – 1 2 3 4 5 6 7 8 9 0 32 Changing Parental Settings (2) Use the number buttons ( - ) to input a password (4-digit number). A password re-entry screen is disp...

Page 34 - A password can also be input by using the left/right cursor buttons (; The password input screen is displayed.; Use the number buttons (; The parental menu screen is displayed.; Changing the parental level

Use the up/down cursor buttons ( , ) to select a level and press the enter button ( ). The parental menu screen reappears.Press the return button ( ) or the left cursor button ( ) to return to the setup screen. The “Parental” setting will have changed to the level selectedin step . 33 Changing Paren...

Page 35 - Changing the password

Parental Password change Level Change password Please input new password. – – – – 1 2 3 4 5 6 7 8 9 0 Change password Please input password againfor confirmation. – – – – 1 2 3 4 5 6 7 8 9 0 Note: If you forget your password... Enter “5534” on the password input screen.You can then perform the follo...

Page 37 - ) to select the desired; Changing the Player Language; The Player Language setup screen is displayed.

36 You can change the setup, message, or other display language(Japanese/English). Switching Between OSD Message Display and Non-Display (2) Use the up/down cursor buttons ( , ) to select “ ” (for display) or “ ” (for non-display), and press the enter button ( ). The setup screen reappears (with the...

Page 38 - Before wiring and installation; Transport Lock Screws; For use when unit is installed horizontally or suspended:

37 Before wiring and installation ■ Transport Lock Screws The mechanism in the changer is “locked” into place during shipment by the transport screws. Be sure to remove the screws prior to installation. Note:After removing the transport lock screws, place the supplied seals (A) over the screwholes. ...

Page 39 - Basic connection 1; Interference on 88.9 MHz; WARNING

38 Basic connection 1 The car stereo should be with FM tuner.Tune the radio to the frequency to which the installer has set the FM modulator. (FM 88.9 MHz or FM 88.3 MHz) Wiring (1) Interference on 88.9 MHz Replacing the fuses If a fuse becomes blown, open the fuse holder as shown in the illustratio...

Page 40 - Basic connection 2; When your car stereo has RCA line-in terminals.

39 Basic connection 2 When your car stereo is SANYO CD or CD/Cassette Receiver with CD ChangerControl model, attached FM modulator is not necessary. Other connection (Example 1) When your car stereo has RCA line-in terminals. Wiring (2) Attached DIN cable (8 pin, 5 m) Attached parking brake cable Co...

Page 41 - See page 29,“Changing the Digital Output”.; Procedure for installation on carpet (Horizontal position)

40 Other connection (Example 2) Adding a digital amplifier or an amplifier with Dolby digital decoder. Notes: ¡ Read the manuals supplied with the digital amplifier or the amplifier with Dolbydigital decoder as well as this manual. ¡ When you add an amplifier with Dolby digital decoder, select “Bits...

Page 44 - Message displays

43 Attempting to play a DVD otherthan one with a region number of“2” or “ALL”. The audiovisual restrictionfunction is operative and the unitis prohibiting DVD play. The command is not available forthe DVD in play. The command is not available onthe screen displayed. Attempting to play a disc that th...

Page 46 - Specifications; Changer

45 Troubleshooting (3) Specifications The “DVD Menu Language” inthe setup is set to a foreignlanguage. The “ プレーヤー言語 (Player Language)” in the setup is set to“ 日本語 ”. Set the “DVD Menu Language” toyour preferred language.* If the language selected is not stored on the disc, anylanguage stored on the...

Sanyo DV-S100 - Manual

Table of Contents:

Summary

Other Sanyo Models