Page 2 - TABLE OF CONTENTS
2 INTRODUCTION -------------------------------------------------------------------- 4GETTING STARTED ---------------------------------------------------------------- 5 Checking package contents ------------------------------------------------ 5Modular jack -------------------------------------------...
Page 4 - Main Features; Superior Range; COMPANDER PLUS Noise Reduction; INTRODUCTION
4 Congratulations on your purchase of this Sanyo cordless telephone.Your Sanyo 2.4 GHz cordless telephone is a fine-quality home communicationsproduct. It is carefully designed and produced by a world leader of consumer andindustrial electronic equipment. With proper maintenance and care, it will pr...
Page 5 - GETTING STARTED; Installation tips
5 Modular jack You need an RJ11 type modular phone jack. If you do not have a modular jack, callyour local phone company to find out how to get one installed. Checking package contents Make sure your package includes the items shown here. GETTING STARTED Installation tips Some cordless telephones op...
Page 6 - Battery setup; RINGER; Connecting the base unit and charging the handset; CHARGE LED
6 Battery setup GETTING STARTED 1. Remove the battery compartment cover on the handset, insert the battery,plug the cord into the jack (inside the compartment) and replace the cover. 2. Set the handset RINGER switch to ON , and place handset in the base. S l i d e d o w n t h e b a t t e r y c o v e...
Page 7 - Telephone line connection; TEL LINE; Mounting on a wall
7 1. Remove the handset from the base and set aside. 2. Align the four slots on the bottom of the base with the four hook-tabs on the bracket. 3. Insert the hook-tabs into the slots and push up until the bracket snaps securely into place. 4. Turn the base over and unplug the AC adaptor and telephone...
Page 8 - Register handsets to the main base before use; line. When you place the handset in the main base, the handset will
8 GETTING STARTED To register the second handset(For CLT-U12, CLT-U22 & CLT-U32) The second handset (charge in the extra charging cradle) must also be registeredto the main base before use. 1. Be sure both handsets are fully charged. 2. Remove the handset from the charging cradle, and place it i...
Page 9 - Handset; NAMES AND CONTROLS
9 Handset NAMES AND CONTROLS 1. Belt clip 2. REDIAL key 3. Headset jack 4. MEM (memory) key 5. CH (channel)/DEL key 6. FLASH/PROG (program) key 7. Charging contacts 8. Incoming call/in use LED 9. Earpiece 10. LCD screen 11. TALK key (also used to end a call) 12. MUTE/FORMAT key (MUTE/FORMAT/TRANSFER...
Page 10 - Base Unit
10 Base Unit NAMES AND CONTROLS 1. Handset cradle 2. PAGE key 3. CHARGE/IN USE LED 4. Wall mount 5. CHARGE LED Charger (For U12, U22 & U32)
Page 11 - Language setting; ENG 2 FRA 3 ESP; Area code setting; AREA CODE; Ringer tone; RINGER TONE 1; INITIAL PROGRAMMING
11 Before using this telephone, 4 initial settings must be completed on the handset:Language, Area code (this is required to use Caller ID service from your tele-phone company), Ringer tone, and Tone/Pulse setting. Language setting 1. Make sure the phone is OFF (not in TALK mode). 2. Press FLASH/PRO...
Page 12 - Resetting to default; DEFAULT 1 NO; Receiving a call; TALK; BASICS
12 Resetting to default You can reset the phone programming to the initial factory default settings. Thedefault settings are: Language English Area Code - - - Ringer Tone 1 Tone/Pulse Setting Tone 1. Make sure the phone is OFF (not in TALK mode). 2. Press FLASH/PROG repeatedly until “ DEFAULT 1 NO ”...
Page 13 - Making a call; Call Timer
13 BASICS Making a call 1. Press TALK . Note : If handset is in the base cradle, remove it from base before pressing the TALK key. 2. Dial the phone number. The screen shows the number as you enter it. 3. Press TALK to end your call. Volume adjustment The VOLUME key adjusts the volume level of the e...
Page 14 - Changing the pre-dial number; REDIAL; Fast redialing; FLASH key
14 BASICS Pre-dialing (up to 32 digits) 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. The number is displayed as you enter it. 3. Press TALK . Note: Pressing *TONE will exit pre-dialing. Changing the pre-dial number 1. Make sure the phone is OFF. 2. Enter the telep...
Page 15 - PAGE; MUTE key
15 BASICS * TONE key This feature enables Pulse service phone users to access touch-tone servicesoffered by banks, credit card companies, etc. 1. Call the bank’s information line. 2. Press *TONE after your call is answered. 3. Follow the voice instructions to complete your transaction. 4. Hang up wh...
Page 16 - Caller ID with Call Waiting; CALLER ID FEATURES; Voice mail indicator
16 This phone receives and displays incoming call information transmitted by yourlocal phone company, provided you subscribe to Voice Mail, Caller ID, and/or CallWaiting services. This information can include the phone number and/or the name,date and time. The phone can store up to 40 calls for late...
Page 17 - Caller ID list; NEW; Reviewing Caller ID list; Format Caller ID numbers
17 Caller ID list The incoming caller information transmitted from the phone company is receivedby your phone between the first and second ring and stored in the Caller ID list. Ifyou answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is ful...
Page 18 - Storing Caller ID entries in the directory; MEM; Dialing a Caller ID number; CID; Deleting entries from the Caller list
18 CALLER ID FEATURES Storing Caller ID entries in the directory Before storing a caller ID number, make sure the number appears in proper digitsfor your dialing area. If not, change it using the MUTE/FORMAT key. For example, if the Caller ID number appears 1-416-222-5555 but it is not a long distan...
Page 19 - Deleting all entries; DIRECTORY
19 CALLER ID FEATURES Deleting all entries 1. Make sure the phone is OFF (not in TALK mode). 2. Use the CID/VOL or keys to display any entry. 3. Press and hold CH/DEL , until “DELETE ALL?” shows on screen. 4. Press CH/DEL again to confirm. “NO CALLS” shows on screen. You can store up to 10 names (up...
Page 20 - Replacing a directory entry with a Caller ID entry; Changing a stored number; Making calls from the directory
20 7. Use the digit keys to enter the desired telephone number. If you make a mistake, press CH/DEL to delete previous digits one by one, then enter the correct digits. If you wish to add a pause, press PAUSE two times at the desired location. Be sure to press it twice, or you will enter a # (number...
Page 21 - Chain dialing from the directory; Memory Location; Battery replacement and handling; CHANGING THE BATTERY
21 number is shown, or use the number pad to select a memory location. Theselected telephone number and name show on screen. 4. While the entry is displayed, press CH/DEL to delete the entry. The screen shows “DELETE?” 5. Press CH/DEL again to delete the entry. “DELETED” shows on screen. Chain diali...
Page 22 - Make sure the telephone is off before you replace the battery.; RECYCLING NICKEL-CADMIUM BATTERIES; to reset the digital security code.; POWER FAILURE
22 CHANGING THE BATTERY • Do not remove the battery from the handset to charge it. • Never throw the battery into a fire, disassemble it, or heat it. • Do not remove or damage the battery casing. • Remove battery if storing the phone for over 30 days. Make sure the telephone is off before you replac...
Page 23 - HEADSET JACK AND BELT CLIP; Headset connection; HEADSET; Belt clip installation; LIGHT SIGNALS; INCOMING CALL/IN USE LED on the handset
23 HEADSET JACK AND BELT CLIP Headset connection (Headset not included) For hands free conversation, connect the headset(not included) to the HEADSET jack. The handset earpiece and microphone are disabled when theheadset is connected. Press TALK to answer or place a call while using the headset. For...
Page 24 - LCD SCREEN MESSAGES
24 LCD SCREEN MESSAGES The following indicators show the status of a message or of the phone. BLOCKED NUMBER/NAME/CALLER TRANSFERRING.. EMPTY ERROR ENTER NAME ENTER TEL NUMBR DELETE ALL? DELETE? END OF LIST HANDSET 1 HANDSET 2 INCOMPLETE DATA MESSAGE WAITING NEW CALLNO CALLS NO DATA REPT UNKNOWN NUM...
Page 25 - SOUND SIGNALS; CALLER ID; TROUBLESHOOTING
25 SOUND SIGNALS A long warbling tone Signals an incoming call Single Tone A key is pressed Three short beeps Error tone Two long beeps Confirmation tone One short beep and one long beep Page signal/Transfer signal Two short beeps every 15 seconds Low battery warning CALLER ID No display • Is batter...
Page 28 - MAXIMIZE BATTERY PERFORMANCE; Charge it for a full 12 hours
28 MAXIMIZE BATTERY PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on theperformance of the rechargeable battery in the handset. To maximize the batteryperformance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charg...
Page 29 - TECHNICAL INFORMATION; CAUTION
29 TECHNICAL INFORMATION REN Number: The Ringer Equivalence Number (REN)assigned to each terminal’s deviceprovides an indication of the maximumnumber of terminals allowed to beconnected to a telephone interface. The REN number of this phone islocated on the bottom of the base unit.The termination on...
Page 31 - WARRANTY APPLICATION
31 TECHNICAL INFORMATION This is confirmed by the registrationnumber. The abbreviation, IC, beforeregistration number signifies thatregistration was performed based ona Declaration of Conformity indicatingthat Industry Canada technicalspecifications were met. It does notimply that Industry Canada ap...
Page 32 - SANYO COMFORT WARRANTY; WARRANTY BECOMES VOID; STATUTORY WARRANTIES
32 SANYO COMFORT WARRANTY ORIGINAL RETAILPURCHASER’S RESPONSIBILITY You, the original retail purchaser, mustpresent your original, dated bill-of-sale together with this warranty toSANYO Canada Inc. or to an autho-rized Sanyo Service Depot when youmake a claim under this warranty. You, the original r...
Page 33 - NATIONWIDE CUSTOMER SUPPORT; Customer; GUARANTEED QUALITY; SOS HELP LINE
33 At Sanyo, fulfilling the needs of our customers is a priority. That’s why wecreated our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialistswill quickly answer your questions about setup...
