Page 2 - TABLE OF CONTENTS
2 INTRODUCTION ----------------------------------------------------------------------- 4GETTING STARTED ------------------------------------------------------------------ 5 Checking package contents ........................................... 5 Modular jack .............................................
Page 4 - Main Features; Superior Range; COMPANDER PLUS Noise Reduction; Other features; INTRODUCTION
4 Congratulations on your purchase of this Sanyo cordless telephone. Your Sanyo 2.4 GHz cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment. With proper maintenance and care, it will...
Page 5 - GETTING STARTED
5 Modular jack You need an RJ11 type modular phone jack. If you do not have a modular jack, call your local phone company to find out how to get one installed. Checking package contents Make sure your package includes the items shown here. GETTING STARTED Base unit Handset Wall mount bracket Adaptor...
Page 6 - Battery setup; RINGER; Telephone line connection; TEL LINE
6 Battery setup 1. Remove the battery compartment cover on the handset, insert the battery, plug the cord into the jack (inside the compartment) and replace the cover. 2. Set the handset RINGER switch to ON , and place handset in the base. 3. Plug the AC adaptor into the Power DC 9V jack on the back...
Page 8 - Handset; NAMES AND CONTROLS; key
8 Handset NAMES AND CONTROLS A M NEW CALL 9 8 10 11 14 13 12 1 2 15 16 19 18 17 6 5 3 4 7 1. Belt clip2. Headset jack3. CH (channel)/DEL key4. REDIAL key5. MEM (memory) key6. FLASH/PROG (program) key7. Charging contacts8. Antenna9. Incoming call/in use LED10. Earpiece 11. LCD screen12. TALK/CALL BAC...
Page 9 - Base Unit
9 Base Unit NAMES AND CONTROLS 1 2 34 1. Wall mount2. Handset cradle3. CHARGE/IN USE LED4. PAGE key
Page 10 - AREA CODE; Ringer tone; “RINGER TONE 1; INITIAL PROGRAMMING
10 Before using this telephone, 7 initial settings must be completed on the handset: Language, Area code (this is required to use Caller ID service from your telephone company), Ringer tone, Tone/Pulse setting, LCD contrast, Do Not Disturb (DND), and Idle Animation. Language setting 1. Make sure the...
Page 11 - LCD contrast; LCD CONTRAST 3”; DND setting; ENABLE DND 1 NO”
11 LCD contrast 1. Make sure the phone is off (not in TALK mode).2. Press FLASH/PROG until “ LCD CONTRAST 3” shows on screen. 3. Press CID/VOL or , or press the number keys (1 – 3) to select the desired contrast level. 4. Press FLASH/PROG to store selection. You will hear a confirmation tone. DND se...
Page 12 - DEFAULT 1 NO
12 8. Press FLASH/PROG again to store the selection. You will hear a confirmation tone. Idle animation This feature allows animation to display when the handset is on the base cradle:1. Make sure the phone is off (not in TALK mode).2. Press FLASH/PROG repeatedly until the following information displ...
Page 13 - Note; Volume adjustment; VOLUME; Ringer switch; BASICS
13 Receiving a call When an incoming call is received, the LED on the handset flashes, and the handset will show caller information. * * Note: A subscription is required from your local phone company to receive Caller ID information on your phone. See Caller ID Features , page 16. 1. Press TALK/CALL...
Page 14 - Fast redialing; REDIAL; FLASH key
14 Pre-dialing (up to 32 digits) 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. The number is displayed as you enter it. 3. Press TALK/CALL BACK . Note: Pressing *TONE will exit pre-dialing. Changing the pre-dial number 1. Make sure the phone is OFF (not in TALK mod...
Page 15 - MUTE key; To mute the microphone:; Low battery warning
15 Handset locator (Paging function) This feature helps to locate a misplaced handset. 1. Press PAGE on the base, the screen shows “PAGING”. The handset beeps continuously for about 2 minutes or until you press any key on the handset. 2. To stop the paging, do one of the following: • Press PAGE on t...
Page 16 - Caller ID with Call Waiting; Caller ID list; NEW; CALLER ID FEATURES
16 This phone receives and displays incoming call information transmitted by your local phone company, provided you subscribe to Voice Mail, Caller ID, and/or Call Waiting services. This information can include the phone number and/or the name, date and time. The phone can store up to 40 calls for l...
Page 18 - Dialing a Caller ID number
18 1. Use the CID/VOL or key to select desired Caller ID entry. 2. Press MEM key, “MEMO # --” shows on the top right corner of screen. 3. Select the desired memory location by pressing the number keys (0- 9). “ANIMATION 0” shows on screen. “0” means the animation feature is disabled. 4. Press the nu...
Page 20 - Store a number in the directory; DIRECTORY
20 You can store up to 10 names (up to 15 characters) and numbers (up to 24 digits) in the directory for quick dialing. If a number exceeds 24 digits, you can program it in parts, and then chain dial the number. Store a number in the directory To program a number to memory: 1. Make sure the phone is...
Page 22 - Reviewing and deleting directory contents; Chain dialing from the directory; Memory Location; MEM
22 Reviewing and deleting directory contents 1. Make sure the phone is OFF (not in TALK mode). 2. Press MEM . 3. Use CID/VOL or to scroll through the directory until the desired name/number is shown, or use the number pad to select a memory location. The selected telephone number and name show on sc...
Page 23 - CHANGING THE BATTERY
23 Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. For a replacement battery, please contact your place of purchase or fill out and mail the enclosed form...
Page 25 - Belt clip installation; HEADSET JACK AND BELT CLIP; CHARGE/IN USE LED on the base; LIGHT SIGNALS
25 Headset connection (Headset not included) For hands free conversation, connect the headset (not included) to the HEADSET jack. The handset earpiece and microphone are disabled when the headset is connected. Press TALK/CALL BACK to answer or place a call while using the headset. Belt clip installa...
Page 26 - LCD SCREEN MESSAGES
26 LCD SCREEN MESSAGES The following indicators show the status of a message or of the phone. BLOCKED NUMBER/ NAME/CALLERDNDEMPTY ERROR ENTER NAMEENTER TEL NUMBR DELETE ALL? DELETE? END OF LIST INCOMPLETE DATA MESSAGE WAITING NEWNO CALLS NO DATAREPTUNKNOWN NUMBER/ NAME/CALLERPAGING VIP RINGER=OFF Th...
Page 27 - CALLER ID; No display; TELEPHONE; No dial tone; SOUND SIGNALS
27 CALLER ID No display • Is battery fully charged? Try replacing the battery. • Make sure that the base is connected to a non-switched AC outlet. Disconnect the base from the plug and plug it in again. • Did you order Caller ID service from your local telephone company? The display will not work un...
Page 28 - TROUBLESHOOTING
28 Dial tone is OK, but cannot dial out • Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service. Handset does not ring • Make sure the RINGER switch on the handset is turned to ON. • You may have too many extension phones on your line. Try unplugging some phon...
Page 29 - TECHNICAL INFORMATION; CHARGE/IN USE LED ON BASE KEEPS FLASHING; Causes of poor reception
29 TECHNICAL INFORMATION CHARGE/IN USE LED ON BASE KEEPS FLASHING • Provided your phone company offers voice mail indicator service and you subscribe to it, the CHARGE/IN USE LED flashes when the phone is in use to indicate there is a message waiting. It stops flashing after the message has been rev...
Page 30 - MAXIMIZE BATTERY PERFORMANCE
30 The freedom that your cordless telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charge it for 12 hours continuou...
Page 31 - CAUTION
31 REN Number: The Ringer Equivalence Number (REN) assigned to each terminal’s device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.The REN number of this phone is located on the bottom of the base unit. The termination on an interface may...
Page 32 - SANYO COMFORT WARRANTY; WARRANTY APPLICATION
32 using an acceptable method of con- struction. In some cases, the company’s inside wiring associated with single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may...
Page 33 - LIMITATIONS
33 WHAT IS NOT COVERED a. Communications products purchased outside Canada. b. Communications products purchased in a used condition. c . Communications products purchased from non Sanyo- authorized dealer. d. Communications products not intended for Canadian usage or products without appropriate Ca...
Page 34 - NATIONWIDE CUSTOMER SUPPORT; Customer; GUARANTEED QUALITY; SOS HELP LINE
34 At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about set...
