Page 2 - Important Information; CAUTION; -To reduce the risk of electric shock, do not perform; FCC STATEMENT; FCC Notice; commercial environment.
1 Important Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated d a n g e r o u s v o l t a g e w i t...
Page 3 - Important Safety Precautions; Power cord protection; and the point where they exit from the apparatus.
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRI...
Page 5 - injured by broken glass pieces in case the LCD panel breaks.; EXAMPLE OF ANTENNA GROUNDING AS PER
23.Panel protection ---The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 24.Pixel defect ---The LCD panel is a very high technol...
Page 6 - Table of Contents; TV Controls and Connectors
Table of Contents 5 Important Information ..............................................................................................................................1 Important Safeguards ................................................................................................................
Page 7 - Adjusting MENU Options
Table of Contents 6 Adjusting MENU Options .........................................................................................................................28 Picture Control ........................................................................................................................
Page 8 - Introducing the TV; Remove; Installing the TV; Keep enough space above and behind the Display.; inches
Introducing the TV Remove the TV fromthe Box STOP! To safely remove the television from the boxIt’s best to use 2 people to remove the television for stability.1. Remove cardboard holders from the box. 2. Remove the cardboard; however, keep the wrapping on the television to protect it while moving. ...
Page 9 - only; the supplied speaker; Take off the rear cover.; Display on. This will prevent it from being damaged.; Rear cover; Replace the rear cover; Screws
Connecting cover Screws Fixed board Fixed board Screws Connecting cover Introducing the TV Attach the SpeakerSystem to the Display If applicable:Removing the Standfor Wall-Mounting Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful insta...
Page 10 - Front Panel; Item; Power Indicator; INPUT; To display the INPUT source list or to quickly select input source.; POWER; Turn the unit on or off.
Introducing the TV TV Controls and Connectors Front Panel INPUT MENU VOL+ VOL- CH+ CH- Item Description Power Indicator Remote Sensor Receives IR (infrared) signals from the remote control. 1 3 5 4 6 7 2 1 2 Press to scan through channels. In menu operations, these buttons serve as down/up buttons. ...
Page 11 - Side Panel; TV Right Side; For service only. The user should not use this terminal.; TV Left Side
Introducing the TV TV Controls and Connectors Side Panel S - V I D E O D - S u b / D V I A U D I O I N P U T H D M I I N P U T C O M P O N E N T A V P r P r P b P b Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D - S u b I N P U T P C / D T V I N P U T ( ) R F R S - 2 3 2 R V I D E O L U S B U P G R A D E...
Page 12 - Connecting the TV; Basic Connections; Overview; For best results, use this connection if you have an antenna system.; For best results, use this connection if you have a cable system.; Disconnect all power sources before making any connections.
Connecting AntennaSystem Connecting the TV Basic Connections Overview To display clear crisp pictures, you must connect your TV correctly and choose the correct display format. It is strongly recommended to connect the cable and antenna input using a 75-ohm coaxial cable to receive optimum picture q...
Page 13 - Sound will be in mono only from the RF output jack of most cable; Cable box; Digital Cable Box
Connecting the TV Basic Connections Connecting Cable Box(Basic) Use this connection if you have a cable system and your cable company scrambles some channels, such as premium channels or all channels (which requires you to use a cable box).Connect the CATV cable to the cable box’s input jack. Then u...
Page 14 - Digital Satellite Receiver; Satellite Receiver; If your
Connecting the TV Basic Connections Connecting Satellite Receiver Connecting DigitalSatellite Receiver Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.Use AV cables to connect the satellite receiver’s AUDIO and S-VIDEO OUT jacks to the TV’s AUDIO and S-VIDEO IN jack...
Page 15 - Using External Equipment; on the remote; Equipment with HDMI output
S - V I D E O D - S u b / D V I A U D I O I N P U T H D M I I N P U T C O M P O N E N T A V P r P r P b P b Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D - S u b I N P U T P C / D T V I N P U T ( ) R F R S - 2 3 2 TV Right Side Using External Equipment Introduction You can connect many types of external...
Page 16 - Equipment with DVI output; connector is for video signals only.; Audio amplifier
S - V I D E O D - S u b / D V I A U D I O I N P U T H D M I I N P U T C O M P O N E N T A V P r P r P b P b Y Y R L L R L R R L VIDEO VIDEO 2 1 1 2 D - S u b I N P U T P C / D T V I N P U T ( ) R F R S - 2 3 2 TV Right Side Using External Equipment Connecting the TV You can use the TV's Coaxial Digi...
Page 17 - VCR; VCR for Recording
S-VIDEO Using External Equipment Connecting the TV Connecting a VCR forPlaying Back Use AV cables to connect the VCR’s AV output jacks to the TV’s AV input jacks.If your VCRs have S-VIDEO jacks, for best picture quality, use an S-VIDEO connection instead of the video cable (yellow) on your combined ...
Page 18 - DVD Player
DVD Player Using External Equipment Connecting the TV Connecting a DVD Player with ComponentVideo Connectors Use a component video cable to connect the DVD player’s YPbPr jacks to the TV’s YPbPr jacks. Use an audio cable to connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks. Be sure...
Page 19 - Connecting a PC; Camcorder
Using External Equipment Connecting the TV Connecting a PC If you connect your PC to the TV, you can watch your personal computer’s display on the TV.When your PC is connected to the TV with the D-Sub cable and audio cable, you can view and listen to the PC’s video and audio output on the TV. D-Sub ...
Page 20 - Connecting Headphones; Headphones
Using External Equipment Connecting the TV Connecting a Second TV or Monitor The TV has a special signal output capability which allows you to hook up a second TV or monitor.Connect the second TV or monitor to the TV’s VCR output jacks. See the Operating Manual of the second TV or monitor for furthe...
Page 21 - Introducing the Remote Control; Cautions regarding use of remote control
Introducing the Remote Control Insert Batteries intothe Remote Control Insert two size AA batteries by matching the and on the batteries to the diagram inside the battery compartment. 1 2 Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructi...
Page 22 - Button Descriptions; Button; To select channels upward or downward.
MTS/SAP ZOOM CCD SLEEP LIST FAVORITE AUDIO PICTURE PIP P.POSITION SWAP FREEZE 1 3 5 4 6 7 8 2 9 10 11 12 13 14 Introducing the Remote Control Button Descriptions POWER Turn the unit on or off. To select additional products to be controlled with remote control. This is a universal remote control. If ...
Page 24 - Getting Started; Running Initial Setup; Select Language; Time Zone; Daylight Saving; RF Input Source; Select Time Zone
Getting Started Running Initial Setup Perform these steps before you press POWER on the remote control to turn on your TV set. 1. Insert the batteries into the remote control unit. 2. Connect the antenna cable to the TV. 3. Plug in the AC power cord to the AC outlet. After you finish connecting the ...
Page 25 - MENU; Press; OK; Scan channels automatically.; Menu Navigation; Picture; Use or button.
Getting Started Setting a Secret Number (Password) For additional protection to your TV and to your user's settings from being accidentally changed, you may want to set a secret number first as below. 1. Press MENU ................. 2. Highlight [ Locks ]........... 3. Press OK ........................
Page 26 - Turning On; For analog TV channels; Selecting Channels; Method 1 - Using CH+ or CH- on the remote control or on the TV
Watching TV Turning On/Off First plug in the AC power cord to the AC outlet. Press POWER on the TV or press POWER on the remote control. or The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, it displays current input signal directly. Turning On Tu...
Page 27 - Watching TV; Adjusting Volume; When you choose
Watching TV Adjusting Volume Using FREEZE button Using ZOOM button Normal If you enter channel number with 0-9 only (without pressing OK), channel selection will be made if there is no operation for a few seconds. For digital TV channels Press the 0-9 number buttons and dash(-) to input a digital ch...
Page 28 - Using ZOOM button
Using ZOOM button Watching TV ZOOM 2 Select to view wide-screen DVDs in full screen. Direct Full Screen ZOOM 1 Select to enlarge the 4:3 picture horizontally only, to fill the display area. Select to detect the resolution of the signal and display an image with the same number of pixels on the scree...
Page 29 - Picture Control; Channels; Accessing Picture Menu; Select to access a picture adjustment window, see [
Adjusting MENU Options Picture Control Channels Locks Guide Picture Audio Picture SettingsScreen SettingsAspect RatioColor TemperatureCinemotion3D Comb FilterTemporal NRRESET PICTURE Settings ON Depending on the signal tuned, you may see different MENU options on your screen. As an example, Menus di...
Page 30 - To quickly change the picture mode, press the; Standard; Select for a highly defined image in a normally bright room.; Option
Option Description Preset Select to adjust picture brightness. Select to adjust picture contrast. Select to adjust clarity of outline detail. Picture Control Adjusting MENU Options Picture Settings: TV Contrast Saturation Tint Sharpness Choose among different preset adjustments for your TV picture 2...
Page 31 - Audio Control; Audio; Select to access an audio adjustment window.; Settings; Theater; A U D I O
Adjusting MENU Options Audio Control Accessing Audio Menu 1. Press MENU ................. 2. Highlight [ Audio ]......... 3. Press OK ...................... Use or button. Option Description Select to access an audio adjustment window. Selecting AudioOptions Settings Channels Locks Guide Picture Aud...
Page 32 - Setting Channels; Setting Channel List; Master Channel List; Also, you may access the master channel list by pressing the
Adjusting MENU Options Setting Channels Accessing Channels Menu 1. Press MENU .................. 2. Highlight [ Channels ]... 3. Press OK ...................... Use or button. Settings Locks Guide Picture Audio Master ListFavoritesScan ChannelsFind ChannelChannel Name Edit Channels Option Descriptio...
Page 33 - Fav 2 Sports; Channel Name Edit; Change Name; Rename Favorite Channels List; Editing Channel Name
Setting Favorite Channels Adjusting MENU Options Setting Channels Fav 2 Sports Press OK to finish Done Rename List Unmark All FAV 2 2.0 2.1 2.2 3.0 4.0 4.1 KFOX-HD KFOX-SD KGO-DT Change Name Press OK to finish FAV 1 Done _ Movie A B C D E F G H I J K L M N O P Q R S T U V W X Y Z , 0 1 2 3 4 5 6 7 8...
Page 34 - Using the Program Guide; Guide
Adjusting MENU Options Using the Program Guide Accessing Program Guide 1. Press MENU ................. 2. Highlight [ Guide ]..... 3. Press OK ...................... Use or button. Settings Channels Locks Picture Audio Guide Show programinformation for the current channel Using the Program Guide HD1...
Page 35 - Setting System; Select to set current time.; Setting Timer; Timers; Select to activate current timer.
Adjusting MENU Options Setting System Accessing Settings Menu 1. Press MENU ................. 2. Highlight [ Settings ]..... 3. Press OK ...................... Use or button. Channels Locks Guide Picture Audio Date & TimeTimersInput SelectClosed CaptionsMenu & DisplaysRESET ALL Settings Sett...
Page 36 - Select to view TV programs; To quickly change the input type, press the; Setting Captions; Setting Menu & Display; Editing Input Labels
Adjusting MENU Options Input Select Date & TimeTimers Input Select Closed CaptionsMenu & DisplaysRESET ALL TV AV1 SV/AV2 Component1 Component2 HDMI Anolog RGB Select to view TV programs Select to view programs from AV1 inputs. Select to view programs from AV2 or S-video Select to view progra...
Page 37 - Input Source; Select to preview the screen saver.
Adjusting MENU Options Editing Input Labels Setting Screen Saver 1. Highlight [Menu & Displays] item in [ Settings ] menu. Press OK or button to access the sub-menu. 2. Highlight [Input Labels Edit] item. Date & TimeTimersInput SelectClosed Captions Menu & Displays RESET ALL Input Labels...
Page 38 - Parental Lock Control; PIN Entry; Accessing Locks Menu; Locks; Channel Locks; Selecting; Select to disable the panel buttons.
Adjusting MENU Options Parental Lock Control 2. Highlight [ Locks ]........... Settings Guide Picture Audio Channels Locks PIN Entry You must enter yourfour-digit PIN tocontinue Press a Number to enter digit Accessing Locks Menu 1. Press MENU ................. 3. Press OK ...................... Use ...
Page 39 - Canadian Custom Rating Options; PG; Tuned to a locked or blocked program.; Content-Based Options; FV
Selecting LocksOptions Adjusting MENU Options Parental Lock Control US Custom Rating Options Option Description USA-TV USA-Movie G PG PG-13 R NC-17 X To ensure maximum blocking capability, the age-based ratings should be used. The content ratings will increase depending on the level of the age-based...
Page 40 - Other Information; Remote Control; equipment may need to be reset.; Video and Audio; Problem; • Adjust the color saturation in the video setting.
Other Information Remote Control Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area.Before calling service, please check the symptoms and follow suggested solutions. P...
Page 41 - General; Lost password
Other Information General Troubleshooting Problem Possible Solutions One or some channels can’t be displayed • These channels may be locked. Please unlock them (see Lock settings).• These channels may be set to hidden in the master channel list. You may mark them with the tick symbol to cancel hidde...
Page 42 - Care and Maintenance; screen; Do not use in hot and cold rooms (locations); About Temperature; can cause a permanent after-image to remain on the screen.
Other Information Care and Maintenance •• screen Do not use in hot and cold rooms (locations) When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to...
Page 43 - Specifications; IN
Other Information Specifications Type: LCD TV Panel: 27" TFT LCD, 16:9 aspect ratio TV system: American TV standard ATSC/NTSC System Receiving Channel: VHF/UHF: VHF 2-13ch, UHF 14-69ch CATV: 1-125ch Digital Terrestrial Broadcast: 2-69ch Digital cable: 1-135ch Audio multiplex: BTSC System Audio o...
Page 44 - DVD; Searching for your Code; Checking the Codes; If a code digit is
Programming your Remote Control (on applicable models) Introduction On some models your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can program the remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifier or...
Page 45 - Changing Volume Lock; Locking Volume Control to One Mode (Global Volume Lock); Troubleshooting; Programming your Remote Control; Replace new batteries.; to change channels, press; Enter; on this remote; CARE
Changing Volume Lock The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device's volume will control volume in all other modes. After that, you can perform Indiv...
Page 46 - Audio Amplifiers; Bose; Manufacturer
Other Information Audio Amplifiers Manufacturer Codes Bose 30674 GE 30078 JVC 30331 Marantz 30321 Nakamichi 30321 NEC 30264 Optimus 30395 Realistic 30395 Sansui 30321 Shure 30264 Sony 30689 Soundesign 30078 Victor 30331 Wards 30078 Yamaha 30354, 30133 Audio Amp/Tuners Manufacturer Codes ADC 30531 Ai...
Page 48 - Cable Converter Boxes
Other Information Cable Converter Boxes Manufacturer Codes Pace 01877, 00237 Panasonic 00000, 00008, 00107 Panther 00637 Paragon 00000 Philips 00317, 01305 Pioneer 01877, 00877, 00144, 00533 Pulsar 00000 Quasar 00000 RadioShack 00883 Regal 00279, 00273 Runco 00000 Samsung 00000, 00144 Scientific Atl...
Page 53 - Televisions
Other Information RadioShack 00869 RCA 00392, 00566, 00855, 00143, 01392 Samsung 01276, 01109, 01108 Sanyo 01219 SKY 00856 Sony 00639, 01640 Star Choice 00869 Tivo 01142, 01442 Toshiba 00749, 01749, 00790, 01285 UltimateTV 01640, 01392 Uniden 00724, 00722 US Digital 01535 USDTV 01535 Voom 00869 Zeni...
Page 62 - VCRs; Wards
Other Information Manufacturer's Codes VCRs Manufacturer Codes Wards 20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072 W hite Westinghouse 20209, 20072 XR-1000 20035, 20072 Yamaha 20038 Zenith 20039, 20033, 20209, 20479 ZT Group 21972 61
Page 63 - SANYO COMFORT WARRANTY
SANYO COMFORT WARRANTY WARRANTY APPLICATION New, unused Sanyo Color Television products purchased in Canada through a Sanyo authorized dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR for parts and labor, from the date of purchase by the original retail pu...
