Page 2 - Instructions
《 2 》 Instructions Use this camera in the following order Insert the USB cable Set up the camera driver Before connecting the camera to a PC, via theUSB cable, you will need to set up the cameradriver. Install the camera driver that is contained inApplication software CD-ROM.(p.115) Take a picture (...
Page 3 - Contents; READY
Getting to know your camera 5 Danger 6 Warning 6 Caution 7 An FCC warning 7 System chart 8 Identification of features 10 Front & Top 10 Back 10 Side/ 5-function button 11 Self-timer lamp 12 Camera Status Lamp 12 Mode icons 12 Connecting to a Power Source 13 Using the AC power adapter (SAC-32, DC...
Page 4 - SETUP
《 4 》 Contents Playing back a still image 61 Playing back a movie clip 62 How to capture the movie clip 62 On camera movie trimming 63 Playing back a recorded voice 64 LCD monitor indicator 65 Using the camera buttons to adjust the camera 66 Thumbnail/ Enlargement button 66 Voice memo / Up button 67...
Page 5 - Getting to know your camera; DANGER
《 5 》 《 5 》 Getting to know your camera Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly. ● When you require After Sales service, please bring the camera and the cause of the cameramalfunction (such as Battery, Memory card etc.) to t...
Page 6 - Danger; Warning
《 6 》 Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shockor severe damage to you or your camera. Internal inspection, maintenance and repairsshould be carried out by your dealer or Samsung Camera Service centre.Please do not use this product in clo...
Page 7 - Caution; An FCC warning
《 7 》 Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera.Do not short circuit, heat or dispose of batteries in fire.Do not insert the batteries with the reverse polarities. Remove the batteries when not plannin...
Page 8 - System chart
《 8 》 System chart Please check that you have the correct contents before using this product. To buy the optionalequipment, contact your nearest Samsung dealer or Samsung service centre. User manual Waranty card Camera strap Software CD (see p.113~114) SD memory card/ MMC (see p.16) DPOF compatible ...
Page 9 - For Windows; CAUTION
《 9 》 System chart USB cable AV cable PictBridge compatible printer(see p.83) Computer (see p.124) External monitor Yellow cable – Video White colour - Voice (see p.100) For Windows PC with processor better than Pentium II 450MHz (Pentium 700MHz or better is recommended) Windows 98/ 98SE/ 2000/ ME/ ...
Page 10 - Identification of features; Back
《 10 》 Identification of features Front & Top Back Jog dial Flash Lens Power button Mode dial lamp Microphone Auto Focuslamp &Selftimer lamp Mode dial Camera status lamp Strap eyelet Zoom T button (Digital zoom) Play mode button/ Print button Tripod socket DC input connection point USB/ AV c...
Page 13 - Connecting to a Power Source; INFORMATION
《 13 》 Connecting to a Power Source Still image Movie Battery life Number of images Recording time Approx. 130 MIN Approx. 260 Approx. 110 MIN Important information about battery usage ● When the camera is not used, turn off the camera power. ● Please remove the battery if the camera will not be use...
Page 16 - Instructions on how to use the memory card
《 16 》 Instructions on how to use the memory card Be sure to format the memory card (see p.96) if you are using a newly purchased memory forthe first time, if it contains data that the camera cannot recognise, or if it contains imagescaptured with a different camera.Turn off the camera power wheneve...
Page 18 - Inserting the memory card; Removing the memory card
《 18 》 Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of thecamera (LCD monitor), and then push the ...
Page 19 - When Using the Camera for the First Time
《 19 》 When Using the Camera for the First Time ■ Charge the rechargeable battery fully before using the camera for the first time. ■ When the camera is turned on for the first time, a menu will be displayed to set date, time andlanguage in the LCD monitor. This menu will not be displayed after sett...
Page 20 - LCD monitor indicator
《 20 》 LCD monitor indicator [ Image & Full Status ] ② ③ ⑤ ④ ⑥ ⑦ ⑧ ⑨ ⑩ ⑯ ⑱ ⑰ ⑳ ⑲ ⑬ ⑫ ⑭ ⑮ ⑪ ① No. Description Icons Page 1 Battery p.15 3 Shooting type p.50 4 Aperture value, Shutter speed F2.8, 1/30s p.22~23 5 Flash p.33~35 6 Self-timer p.36~38 7 Voice memo/ MIC. Off p.25 8 Macro p.32 9 Metering...
Page 21 - Starting the recording mode
《 21 》 LCD monitor indicator Starting the recording mode 1. Insert the batteries (p.15). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.18). As this camera has a 20MB internal memory, you do not need to insert thememory card. If the memory card is not inserted...
Page 27 - Things to Watch Out for When Taking Pictures
《 27 》 Things to Watch Out for When Taking Pictures ■ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. ■ The available recording time may vary depending on shooting condit...
Page 28 - Using the camera buttons to adjust the camera
《 28 》 Using the camera buttons to adjust the camera ■ The RECORDING (AUTO, PROGRAM, APERTURE PRIORITY, SHUTTER PRIORITY,MANUAL, MySET, MOVIE CLIP, SCENE) mode function can be set up by using the camerabuttons. ● Used for turning the camera’s power on / off. ● If there is no operation during the spe...
Page 33 - Focus lock
《 33 》 Focus lock ■ To focus on the subject positioned outside of the centre, use the focus lock function. ● Using the Focus Lock 1. Ensure the subject in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera is focused on the subje...
Page 43 - MF button
《 43 》 MF button Use this button to select the focusing method. ● Automatic focusing : Slightly press the shutter to let the camera measure distance to the object and select the best focusing. If successfully focused with the slight press of the shutter, the automaticfocusing mark is turned green. ●...
Page 44 - Using the LCD monitor to adjust the camera settings
《 44 》 Using the LCD monitor to adjust the camera settings ■ The following functions are available, depending on the mode you have selected. The items indicated by are default settings. ■ You can use the menu on the LCD monitor to set up recording functions. In any mode withthe exception of VOICE RE...
Page 47 - How to use the menu
《 47 》 How to use the menu 4. Select a sub menu, and then press the OK button. The value you set will be saved and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT an...
Page 50 - Continuous shot
《 50 》 Continuous shot ■ You can select continuous shot, AEB (Auto Exposure Bracketing) and AFB (Auto FocusBracketing). If you select CONTINUOUS, AEB or AFB, the flash will automatically be set toFlash Off. [Single]: Take one picture only [Continuous]: Images will be taken continuously until the shu...
Page 51 - Effect
《 51 》 Sharpness ■ By using the camera's digital processor, it is possible to add special effects to your images. [Normal] : No effect is added to the image. [B & W] : Captured images will be stored in black and white. [Sepia] : Captured images will be stored in a sepia tone (a gradient of yello...
Page 52 - Special Effect : Preset focus frames
《 52 》 Special Effect ■ By using the camera ’ s digital processor, it is possible to add special effects to your images. You can select this menu only in the PROGRAM, MySET, Aperture priority, Shutter priorityand MANUAL modes. ■ You can select the preset focus frame, Composite shots and Photo frame ...
Page 54 - Special Effect : Composite shooting
《 54 》 Special Effect : Composite shooting ■ You can combine 2 ~ 4 different shots in a still image. ※ You can use the flash button, self-timer button, macro button, voice memo button and theZoom W/T button during the composite shooting. ※ If you press the camera buttons during the composite shots,e...
Page 56 - Special Effect : Photo Frame
《 56 》 Special Effect : Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. ■ Date & Time information will not be printed on the stored image taken with [Photo Frame]menu. 1. Select the MANUAL mode, and press the menu button.2. Press the LEFT/ RIGHT butt...
Page 57 - On Screen Display Information
《 57 》 On Screen Display Information ■ In any mode with the exception of VOICE RECORDINGmode, you can check the recording status in the LCDmonitor or select the power save mode. [Full OSD] [Histogram] [Basic OSD] [Save mode : LCD off] ■ Histogram shows you the distribution of brightness inrecorded i...
Page 60 - Movie Clip frame stabiliser
《 60 》 Movie Clip frame stabiliser ■ This function helps stabilise images captured during movie recording.You can select this menu only in the MOVIE CLIP mode. ● How to use this function 1. Select the MOVIE CLIP mode by rotating the mode dial and press the menu button. Select the [Stabilizer] menuan...
Page 61 - Starting play mode
《 61 》 Starting play mode ■ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ■ If you have turned on the camera by pressing the POWER button, you can press the PLAYMODE button once to switch to Play mode and p...
Page 74 - Setting up the play back function using the LCD monitor
《 74 》 Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,pressing the MENU button displays the menu on the LCD monitor. The menus you can setup in Play mode are as follows. To capture an image after setting up the ...
Page 77 - Starting the slide show
《 77 》 Starting the slide show ● The loading time depends on the image size and quality. ● While the slide show is playing, only the first frame of a MOVIE file is displayed. ● While the slide show is playing, the voice recording file will not display. INFORMATION ● Start the slide show : The slide ...
Page 79 - Protecting images
《 79 》 Protecting images ■ This is used to protect specific shots from being accidentally erased (Lock).It also unprotects images that have been previously protected (Unlock). ● Protecting Images 1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [...
Page 83 - Rotating an image; DPOF
《 83 》 Rotating an image ■ DPOF(Digital Print Order Format) allows you to embed printing information on your memorycard’s MISC folder. Select the pictures to be printed and how many prints to make. ■ The DPOF indicator will display on the LCD monitor when an image that has DPOFinformation plays back...
Page 87 - On Screen Display information
《 87 》 On Screen Display information ■ You can check shooting information about the displayed image. ● How to select the type of information you want to see 1. Press the play mode button and press the menu button.2. Select the [OSD Information] menu tab by pressing the LEFT/ RIGHT button. 3. Select ...
Page 88 - PictBridge
《 88 》 PictBridge ■ You can use the USB cable to connect this camera to a printer that supports PictBridge (soldseparately) and print the stored images directly. TIFF, Movie clips and voice files cannot beprinted. You can set up the following settings from the PictBridge menu. Images : Select the pi...
Page 89 - PictBridge: Picture Selection
《 89 》 PictBridge: Picture Selection ■ Easy printing When you connect the camera to printer in the Play backmode, you can print a picture easily. - Pressing the shutter button : Currently displayed image will be printed with the printer’sdefault setting. - Pressing the Left/ Right button : Selects a...
Page 90 - PictBridge : Print Setting
《 90 》 PictBridge : Print Setting Menu Size Setting the size of the printing paper Auto, Postcard, Card, 4X6, L, 2L, Letter, A4, A3 Setting the number of pictures to be printed on a sheet of paper Type Setting the quality of the printing paper Auto, Plain, Photo, Fastphoto Setting the quality of the...
Page 93 - Setup menu
《 93 》 Setup menu ■ In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu Page Reset - Series - Power Off Off, 1, 3, 5, 10 min - p.95 ENGLISH 한국...
Page 94 - File name
《 94 》 Setup menu ■ This function allows the user to select the file naming format. ● Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [File] menu by pressing the UP/ ...
Page 96 - Formatting a memory card
《 96 》 Language ● Setting Language 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [Language] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu...
Page 97 - Imprinting the recording date
《 97 》 Setting up the Date/ Time/ Date type ■ You can change the date and time that will be displayed on the captured images and set upthe date type. ● Setting Date/Time & Selecting Date Format 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ R...
Page 99 - Auto Focus lamp; LCD brightness
《 99 》 Auto Focus lamp LCD brightness ■ You can adjust the LCD brightness. ● Adjusting LCD Brightness 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [LCD] menu by pressing the UP/ DOWN b...
Page 100 - Selecting Video out type
《 100 》 Selecting Video out type ■ The Video output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which thecamera is connected. PAL mode can support only BDGHI. ● Setting the Video Out Type 1. In any mode with the exc...
Page 101 - Quick view; Initialisation
《 101 》 Quick view ■ If you enable Quick View before capturing an image, you can view the image you justcaptured on the LCD monitor for the duration set in the [Quick View] setup. Quick view ispossible only with still images. ● Setting Quick View 1. In any mode with the exception of Voice Recording ...
Page 102 - Setting up the MYCAM menu; Start up image
《 102 》 Setting up the MYCAM menu ■ You can set up a start up image, start up sound and shutter sound. Every camera workingmode (with the exception of Voice recording mode) has the MyCAM menu.The items indicated by are default settings. Menu tab Main menu Sub menu Page Off LOGO User Image 1 User Ima...
Page 103 - Start up sound; Shutter sound
《 103 》 Start up sound ■ You can select the shutter sound. ● Selecting the Shutter Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Mycam] menu tab. 3. Select the [Shutter Sound] menu by pressing the UP/ DOWN butt...
Page 104 - Important notes
《 104 》 Important notes Be sure to observe the following precautions! ■ This unit contains precision electronic components. Do not use or store this unit in thefollowing locations. - Areas exposed to severe changes in temperature and humidity.- Areas exposed to dust and dirt.- Areas exposed to direc...
Page 106 - Warning indicator
《 106 》 Warning indicator ■ There are several warnings that may appear on the LCD display. Card Error ! ㆍ Memory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert the memory card and format the memory card (p.96) No Card ! ㆍ The camera can ’ t recogn...
Page 107 - Before contacting a service centre
《 107 》 Warning indicator ■ Please check the following Before contacting a service centre Low Light ! ㆍ When taking pictures in dark places → Use a tripod and take pictures in Flash Photography mode Out Of Number ㆍ When selecting too many printing pages in the PictBridge menu. → Select printing page...
Page 110 - Specifications
《 110 》 Specifications Type 1/1.8" CCD Effective Pixel Approx. 8.1 Mega-pixel Total Pixel Approx. 8.4 Mega-pixel Schneider Lens f = 7.8 ~ 23.4 mm (35mm film equivalent : 38 ~ 114 mm) F No. F2.8 ~ F5.1 Still Image mode : 1.0X ~ 10.0X Play mode : 1.0X ~ 12.75X (depends on image size) Viewfinder LC...
Page 112 - Software Notes; System Requirements
《 112 》 Software Notes Please ensure that you read the instruction manual carefully before use. ㆍ The attached software is a camera driver and image editing software tool for Windows. ㆍ Under no circumstances should all or part of either the software or the user manual bereproduced. ㆍ Copyrights for...
Page 113 - About the software
《 113 》 About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the followingwindow should automatically run. Before connecting the camera to the PC,you should first install the camera driver. ■ Camera driver : This enables images to transfer between the camera...
Page 115 - Setting up the application software
《 115 》 Setting up the application software To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to the PC and can beedited by an image editing program. You can visit the Samsung web-site through the internet. htt...
Page 124 - Starting PC mode
《 124 》 Starting PC mode ■ Connecting the camera to a PC 1. Turn the PC power on.2. Turn the camera power on.3. In any mode other than Voice Recording mode, press the MENU button. 4. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 5. Select the [USB] menu by pressing the UP/ DOWN butto...
Page 127 - Removing the USB Driver for Windows 98SE
《 127 》 Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1. Click [Start → Settings] and click [Control Panel]. 4. Click the [OK] button. The camera is removed from the system. 2. Double-click [System]. 3. Select [Device manager → Hard Disk Contr...
Page 129 - Removable Disk
《 129 》 Removable Disk ■ To use this camera as a Removable Disk, install (p.115) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (D...
Page 130 - Removing the removable disk
《 130 》 Removing the removable disk [Click !] [Double-click!] [Click !] [Click !] 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. ■ Windows 2000/ME/XP(The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC...
Page 131 - Using the USB Driver for MAC
《 131 》 Removing the removable disk 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintos...
Page 132 - Digimax Master
《 132 》 Digimax Master ■ You can download, view, edit and save your images and movies with this software. Thissoftware is only compatible with Windows except for the Windows 98. ■ To start the program, click [Start → Programs → Samsung → Digimax Master]. ● Downloading images 1. Connect the camera to...
Page 138 - Digimax Reader
《 138 》 Digimax Reader ■ Digimax Reader is a Text recognition program. You can save an image file that is captured inthe Text mode, as a text file with this program. This software is only compatible with Windows. ■ To start the program, click [Start → Programs → Digimax Reader]. The following screen...
Page 140 - FAQ
《 140 》 FAQ ■ Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. → Turn the camera power on. [Case 2] USB Driver is not installed correctly. → Install the USB Driver correctly. Refer to page 115. [Case 3] The USB cable is not connected or you are using a...
