Samsung SWA-9100S/EN - User Manual

ENG

SAFETY INFORMATION

Thank you for purchasing this product (SWA-9100S).

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Refer to the table below for an explanation of symbols which may
be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.

This symbol indicates that this product has
included important literature concerning
operation and maintenance.

Class II product : This symbol indicates that
it does not require a safety connection to
electrical earth (ground).
If this symbol is not present on a product with
a power cord, the product MUST have a reliable
connection to protective earth (ground).

AC voltage : This symbol indicates that the
rated voltage marked with the symbol is AC
voltage.

DC voltage : This symbol indicates that the
rated voltage marked with the symbol is DC
voltage.

Caution, Consult instructions for use : This
symbol instructs the user to consult the user
manual for further safety related information.

•

The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it from overheating,
these slots and openings must never be blocked or covered.

–

Do not place this apparatus in a confined space, such as a

bookcase, or built-in cabinet, unless proper ventilation is
provided.

– Do not place this apparatus near or over a radiator or heat

register, or where it is exposed to direct sunlight.

– Do not place vessels (vases etc.) containing water on this

apparatus. A water spill can cause a fire or electric shock.

•

Do not expose this apparatus to rain or place it near water
(near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.). If this apparatus
accidentally gets wet, unplug it and contact an authorized dealer
immediately.

•

Do not overload wall outlets, extension cords or adaptors beyond

their capacity, since this can result in fire or electric shock.

•

Route power-supply cords so that they are not likely to be walked
on or pinched by items placed on or against them. Pay particular
attention to cords at the plug end, at wall outlets, and the point
where they exit from the apparatus.

•

To protect this apparatus from a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power
line surges.

•

Before connecting the AC power cord to the DC adaptor
outlet, make sure the voltage designation of the DC adaptor
corresponds to the local electrical supply.

•

Never insert anything metallic into the open parts of this
apparatus. Doing so may create a danger of electric shock.

•

To avoid electric shock, never touch the inside of this apparatus.

Only a qualified technician should open this apparatus.

• Make sure to plug the power cord in until it is firmly seated.

When unplugging the power cord from a wall outlet, always pull
on the power cord’s plug. Never unplug by pulling on the power
cord. Do not touch the power cord with wet hands.

•

If this apparatus does not operate normally - in particular, if
there are any unusual sounds or smells coming from it - unplug it
immediately and contact an authorized dealer or service centre.

•

Maintenance of Cabinet.

– Before connecting other components to this product, be sure

to turn them off.

•

Be sure to pull the power plug out of the outlet if the product is
to remain unused or if you are leaving the house for an extended
period of time (especially when children, elderly, or disabled
people will be left alone in the house).

– Accumulated dust can cause an electric shock, an electric

leakage, or a fire by causing the power cord to generate

sparks and heat or the insulation to deteriorate.

•

Contact an authorized service centre for information if you
intend to install your product in a location with heavy dust, high
or low temperatures, high humidity, chemical substances, or
where it will operate 24 hours a day such as in an airport, a train
station, etc. Failing to do so may cause serious damage to your
product.

•

Use only a properly grounded plug and wall outlet.

– An improper ground may cause electric shock or equipment

damage. (Class l Equipment only.)

PRECAUTIONS

1.

Ensure that the AC or DC power supply in your house complies

with the power requirements listed on the identification sticker

located on the back of your product. Install your product
horizontally, on a suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not covered. Do not place the

unit on amplifiers or other equipment which may become hot.

This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC plug from the wall
outlet.

2.

Do not expose the unit to direct sunlight or other heat
sources. This could lead to overheating and cause the unit to
malfunction.

3.

Unplug the Power cord from the AC wall socket if the unit
malfunctions. Your product is not intended for industrial use. It
is for personal use only. Condensation may occur if your product
has been stored in cold temperatures. If transporting the unit
during the winter, wait approximately 2 hours until the unit has
reached room temperature before using it.

4.

If the electricity supplied to your home is rated at 240V AC, use
a suitable plug adapter to connect this unit to your electrical
outlets.

01 CHECKING THE

COMPONENTS

Wireless Receiver Module / Surround Speaker X 2 / Speaker
Cable X 2 / Power Cord

NOTES

•

For more information about the power supply and power
consumption, refer to the label attached to the product.
(Label: Rear of the Main Unit)

• Design and specifications are subject to change without prior

notice.

02 CONNECTING THE

SWA-9100S TO A
SOUNDBAR

1. Connect the Wireless Receiver Module to

2 Surround Speakers

Use the speaker cables to connect the two surround sound
speakers to the Wireless Receiver Module.

•

When connecting the speaker cable, connect the core wire to
the speaker.

SURROUND-RIGHT

SURROUND-RIGHT

•

The speaker cables are colour coded.

SURROUND-LEFT

ID SET

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

ID SET

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

SURROUND-RIGHT

SURROUND-LEFT

SURROUND-RIGHT

•

When connecting the speaker cables to the Wireless Receiver
Module, follow these steps:
1.

Insert the grey plug into the grey jack on the Wireless

Receiver.

2.

Insert the blue plug into the blue jack on the Wireless

Receiver.

•

When connecting the speaker cables to the surround speakers,
follow these steps:
1.

Match the speaker cable connected to the grey jack to the

speaker with the grey label.

2.

Match the speaker cable connected to the blue jack to the

speaker with the blue label.

3.

Insert the red and black coloured ends of each speaker cable

into the red and black jacks of the appropriate speaker.
•

The labels are on the backs of the speakers.

2. Check the standby status after plugging into

an electrical outlet

Plug the Wireless Receiver Module power cord into an electrical
outlet and into the Wireless Receiver Module to turn on the
Wireless Receiver Module. The LINK LED indicator (blue LED) on
the Wireless Receiver Module blinks. If the LED does not blink,
refer to step 7.

ID SET

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

POWER

STANDBY

LINK

STANDBY

LINK

ID SET

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

POWER

STANDBY

LINK

STANDBY

LINK

Blue blinking

3. Turn off the Soundbar

Turn off the Soundbar using the Soundbar’s remote control or by
pressing the

(Power)

button on the main Soundbar unit.

BYE

•

The image of the Soundbar may differ from your Soundbar,
depending on the model.

4.

Configure “ID SET” using the Soundbar’s

remote control

Press the

Up

button on the Soundbar remote control for 5 seconds.

•

The

ID SET

message appears on the Soundbar main unit’s display

for a short time and then disappears.

•

After the

ID SET

process, the Soundbar power is automatically

turned on.

SOUN

D

MOD

E

PAIR

5 Sec

ID SET

•

The image of the Soundbar may differ from your Soundbar,
depending on the model.

5. Check if the LINK LED is solid blue

(connection complete)

STANDBY

LINK

STANDBY

LINK

Blue is On

The LINK LED indicator stops
blinking and glows a solid
blue when a connection is
established between the
Soundbar and the Wireless
Receiver Module.

6. If the SWA-9100S does not connect, take

the necessary steps according to the LED

Indicator’s status

LINK (Blue) On

: Connected with the Soundbar.

LINK (Blue) Blinking

: Connection standby status.

•

Check if the Soundbar is turned on.

•

Repeat steps 3 through 5.

STANDBY (Red) On

: Connection failure.

•

Check if the Soundbar is turned on.

•

1.

Press the

ID SET

button on the back of the Wireless

Receiver Module with a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).

ID SET

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

ID SET

5 Sec

2.

Repeat steps 3 through 5.

Others

: Errors

•

Contact a Samsung Service Centre.

03 COMPATIBLE MODELS

•

Compatible with select Samsung Soundbar. Please visit the
Soundbar product page at

www.samsung.com/support

for more

information.

• Compatible model list is subject to change without further notice.

04 OPEN SOURCE LICENCE

NOTICE

To send inquiries and requests for questions regarding open
sources, contact Samsung Open Source (http://opensource.
samsung.com)

05 IMPORTANT NOTE ABOUT

SERVICE

•

An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect

with the product (i.e. where the user manual has not been
read)

(b) you bring the unit to a repair centre and there is no defect

with the product (i.e. where the user manual has not been
read).

•

You will be informed of the administration fee amount before a
technician visits.

06 SPECIFICATIONS AND

GUIDE

Specifications

Model Name

SWA-9100S

Weight
Wireless Receiver Module

0.7 kg

Surround Speaker

0.6 kg

Dimensions (W x H x D)
Wireless Receiver Module

50.0 x 201.3 x 132.0 mm

Surround Speaker

87.5 X 147.0 X 87.5 mm

Operating Temperature Range

+5°C to +35°C

Operating Humidity Range

10 % ~ 75 %

Frequency range

20Hz~20kHz

Overall Standby Power Consumption (W)

1.0W

NOTES

•

Samsung Electronics Co., Ltd reserves the right to change the

specifications without notice.

•

Weight and dimensions are approximate.

Hereby, Samsung declares that this radio equipment is in
compliance with Directive 2014/53/EU and the relevant UK
statutory requirements.
The full text of the declaration of conformity is available at the
following internet address: http://www.samsung.com go to
Support and enter the model name.
This equipment may be operated in all EU countries and in the UK.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates
that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where

they purchased this product, or their local government office,

for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
and its electronic accessories should not be mixed with other
commercial wastes for disposal.

For information on Samsung’s environmental commitments

and product specific regulatory obligations e.g. REACH, WEEE,

Batteries, visit: www.samsung.com/uk/aboutsamsung/
sustainability/environment/our-commitment/data/

© 2021 Samsung Electronics Co., Ltd. All rights reserved.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre.

Country

Samsung Service Centre



Web Site

`

Europe

UK

0333 000 0333

www.samsung.com/uk/support

IRELAND (EIRE) 0818 717100

www.samsung.com/ie/support

GERMANY

06196 77 555 77

www.samsung.com/de/support

FRANCE

01 48 63 00 00

www.samsung.com/fr/support

ITALIA

800-SAMSUNG (800.7267864)

www.samsung.com/it/support

SPAIN

91 175 00 15

www.samsung.com/es/support

PORTUGAL

808 207 267

www.samsung.com/pt/support

LUXEMBURG

261 03 710

www.samsung.com/be_fr/support

NETHERLANDS 088 90 90 100

www.samsung.com/nl/support

BELGIUM

02-201-24-18

www.samsung.com/be/support

(Dutch)

www.samsung.com/be_fr/support

(French)

NORWAY

21629099

www.samsung.com/no/support

DENMARK

707 019 70

www.samsung.com/dk/support

FINLAND

030-6227 515

www.samsung.com/fi /support

SWEDEN

0771 726 786

www.samsung.com/se/support

POLAND

801-172-678* lub +48 22 607-93-33*

Specjalistyczna infolinia do obsługi

zapytań dotyczących telefonów

komórkowych: 801-672-678*

* (opłata według taryfy operatora)

http://www.samsung.com/pl/

support/

HUNGARY

0680SAMSUNG (0680-726-7864)

www.samsung.com/hu/support

AUSTRIA

0800 72 67 864 (0800-SAMSUNG)

www.samsung.com/at/support

SWITZERLAND

0800 726 786

www.samsung.com/ch/support

(German)

www.samsung.com/ch_fr/support

(French)

CZECH

800 - SAMSUNG (800-726786)

www.samsung.com/cz/support

SLOVAKIA

0800 - SAMSUNG (0800-726 786)

www.samsung.com/sk/support

Country

Samsung Service Centre



Web Site

CROATIA

072 726 786

www.samsung.com/hr/support

BOSNIA

055 233 999

www.samsung.com/support

NORTH

MACEDONIA

023 207 777

www.samsung.com/mk/support

MONTENEGRO

020 405 888

www.samsung.com/support

SLOVENIA

080 697 267 (brezplačna številka)

www.samsung.com/si/support

SERBIA

011 321 6899

www.samsung.com/rs/support

KOSOVO

0800 10 10 1

www.samsung.com/support

ALBANIA

045 620 202

www.samsung.com/al/support

BULGARIA

*3000 Цена на един градски

разговор

0800 111 31 Безплатен за всички

оператори

www.samsung.com/bg/support

ROMANIA

*8000 (apel in retea)

08008-726-78-64

(08008-SAMSUNG) Apel GRATUIT

Atenţie: Dacă efectuaţi apelul din

reţeaua Digi (RCS/RDS), vă rugăm să

ne contactaţi formând numărul

Telverde fără ultimele două cifre,

astfel: 0800872678.

www.samsung.com/ro/support

CYPRUS

8009 4000 only from landline, toll

free

www.samsung.com/gr/support

GREECE

80111-SAMSUNG (80111 726 7864)

only from land line

(+30) 210 6897691 from mobile and

land line

LITHUANIA

8-800-77777

www.samsung.com/lt/support

LATVIA

8000-7267

www.samsung.com/lv/support

ESTONIA

800-7267

www.samsung.com/ee/support

•

To turn this apparatus off completely, you must disconnect it
from the wall outlet. Consequently, the wall outlet and power
plug must be readily accessible at all times.

•

Do not allow children to hang on the product.

•

Store the accessories (battery, etc.) in a location safely out of the
reach of children.

•

Do not install the product in an unstable location such as a shaky

self, a slanted floor, or a location exposed to vibration.

•

Do not drop or strike the product. If the product is damaged,
disconnect the power cord and contact a service centre.

•

To clean this apparatus, unplug the power cord from the wall
outlet, and then wipe the product using a soft, dry cloth. Do
not use any chemicals such as wax, benzene, alcohol, thinners,
insecticide, air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the product or erase
the printing on the product.

•

Do not expose this apparatus to dripping or splashing. Do not put

objects filled with liquids, such as vases, on the apparatus.

•

Do not plug multiple electric devices into the same wall socket.

Overloading a socket can cause it to overheat, resulting in a fire.

WARNING :

•

TO PREVENT THE SPREAD OF FIRE, KEEP
CANDLES AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL
TIMES.

• To reduce the risk of fire or electric shock, do not

expose this appliance to rain or moisture.

Important Safety Instructions

Read these operating instructions carefully before using the
unit. Follow all the safety instructions listed below. Keep these
operating instructions handy for future reference.

1.

Read these instructions.

2.

Keep these Instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the
obsolete outlet.

10.

Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11.

Only use attachments/accessories specified by the

manufacturer.

12.

Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13.

Unplug this apparatus during lightning storms
or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate
normally, or has been dropped.

USER MANUAL

SWA-9100S

VA81-01112J-00

NSPBI00842A -00