Samsung STP-102S - Manual
Samsung STP-102S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Roll paper
- Page 3 – ON LINE; Buttons; Indicator lights
- Page 4 – Chapter 2. Connecting the Cable; -2. Connecting the printer to your Computer
- Page 5 – Chapter 3. Installing the Paper Roll
- Page 6 – DIP switch functions; Dip Switch; Chapter 4. Setting the DIP Switches; CAUTION; NOTE
- Page 7 – Chapter 6. Code Table
- Page 11 – Chapter 7. Functions; Commands
- Page 12 – Chapter 8. Control Commands; Bit
- Page 13 – Function; ESC E n
- Page 14 – Character set; ESC V n; Justification; ESC a n
- Page 17 – GS h n; Bar Code System
- Page 18 – APPENDIX B: Specification
Warning - U.S
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interface when the equipment is
operated in a commercial environment. This equipment generates uses, and can
radiate radio frequency energy and, if not installed and uses in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Notice - Canada
This Apparatus complies with class "A" limits for radio interference as specified in
the Canadian department of communications radio interference regulations.
Introduction
The STP-102S and STP-102P Roll Printer is designed for use with electric instruments
such as system ECR, POS, banking equipment peripheral equipment, etc.
The main features of the printer are as follows:
1. High speed printing
2. Low noise thermal printing.
3. RS-232 serial interface (STP-102S). Parallel interface (STP-102P).
4. The data buffer allows the unit to receive print data even during printing.
5. Different print densities can be selected by DIP switches.
Please be sure to read the instruction in this manual carefully before using your
new STP-102S and STP-102P.
NOTE
The socket-outlet shall be near the equipment and it shall be easy
accessible.
STP-102S / STP-102P
Operator's Manual
DATE: July. 2001
MANUAL REVISION 2.0
TEL : 82-31-210-5620
FAX : 82-31-210-5589
POWER
ERROR
FEED
ON LINE
ELECTRO- MECHANI CS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Chapter 1. Unpacking 1-1. Checking the contents of the Printer1-2. Locating the Printer1-3. Printer Part names1-4. Operating Control Panel 4 4456 Table of Contents Chapter 2. Connecting the cable 2-1. Connecting the AC adapter to your printer 7 7 Chapter 3. Installing the Paper Roll 10 Chapter 4. ...
1-3. Printer Part Names 5 (1) Cover top(2) Case top(3) Case bottom(4) Control panel(5) Roller(6) Power switch(7) Interface connector (male)(8) DC Jack(9) Interface connector (female)(10) Roll paper(11) Detector switch POWER ERROR FEED ON LINE (1) FEED ON LINE (4) (3) (2) (5) (10) (11) POWER ERROR Co...
7 Chapter 2. Connecting the Cable 2-1. Connecting the AC adapter to your printer When the printer is used, use te optional AC adapter, AP-1611-UV for your printer. Using an incorrect power supply may cause fire or electrical. When connecting or disconnecting the power supply from the printer, make s...
