Page 2 - Safety Instructions; Note to CATV system installer:; CAUTION
Warning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with ...
Page 3 - Thank You for Choosing Samsung; • Keep the safety and operating instructions for future reference.
S AFETY 1 Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioningcapabilities, making it one of the best products in its class. We are proud to ...
Page 5 - Displaying any stationary images that
S AFETY 3 Important Warranty InformationRegarding Television FormatViewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) areprimarily designed to view standard format full-motion video. The images displayed onthem should primarily be in the standard 4:3 rat...
Page 6 - O N T E N T S
C O N T E N T S 1 C ONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . .1.2 Front Panel Buttons . . . ...
Page 8 - List of Features; C h a p t e r O n e; O U R; T V
1 .1 C HAPTER O NE : Y OUR N EW TV List of Features Your Samsung TV was designed with the latest technology. This TV is a high-performanceunit that includes the following special features: • Easy-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • ...
Page 9 - Familiarizing Yourself with The TV
C HAPTER O NE : Y OUR N EW TV 1 .2 Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screenmenu. To use the more advanced features, you must use the remote control. Y O U R N E W T V Œ TV/VIDEO All the inputs conn...
Page 10 - PERFECT FOCUS; VIDEO INPUT jack; AUDIO INPUT jacks; Side Panel Jacks
1 .3 C HAPTER O NE : Y OUR N EW TV Y O U R N E W T V Œ PERFECT FOCUS Press to adjust for the optimum picture set in the Factory. ´ VIDEO INPUT jack Use to connect a video signal from a camcorder or a video game. ˇ AUDIO INPUT jacks Use to connect the audio signals from a camcorder or video game. ¨ S...
Page 11 - Rear Panel Jacks
C HAPTER O NE : Y OUR N EW TV 1 .4 Y O U R N E W T V Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continu-ously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components(i.e., a VCR and a DV...
Page 13 - VCR controls
C HAPTER O NE : Y OUR N EW TV 1 .6 Y O U R N E W T V Remote Control (continued) ¯ ANT A/B Press to select the ANT A or ANTB. ˘ R.surf Press to automatically return to apreferred channel after a user-preset time delay. ¿ S.Mode Adjust the TV sound by selectingone of the preset factory settings(or sel...
Page 14 - Connecting VHF and UHF Antennas; Antennas with 300-ohm Flat Twin Leads; C h a p t e r Tw o; N S T A L L A T I O N
2 .1 C HAPTER T WO : I NSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2. If you have two anten...
Page 15 - Connecting Cable TV; Cable without a Cable Box; If you want to connect cable, and you do not need to use a cable box:; Antennas with 75-ohm Round Leads
C HAPTER T WO : I NSTALLATION 2 .2 Connecting Cable TV You can connect different cable systems to your TV, including cable without a cable box,and cable with a cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable ...
Page 16 - Cable with a Cable box that Descrambles All Channels; This terminal might be labeled; Connecting to a Cable Box that Descrambles Some Channels
2 .3 C HAPTER T WO : I NSTALLATION I N S T A L L A T I O N Cable with a Cable box that Descrambles All Channels 1 Find the cable that isconnected to theANTENNA OUT terminalon your cable box. Thisterminal might belabeled “ANT OUT”,“VHF OUT”, or simply,“OUT”. 2 Connect the other end ofthis cable to th...
Page 18 - Connecting a VCR; if you have
2 .5 C HAPTER T WO : I NSTALLATION I N S T A L L A T I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or acable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system....
Page 19 - Connecting a Camcorder; Connecting a Second VCR to Record from the TV
C HAPTER T WO : I NSTALLATION 2 .6 I N S T A L L A T I O N Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allowyou to view the camcorder tapes without using a VCR. 1 Locate the A/V output jacks on thecamcorder. They are usually found onthe...
Page 20 - Connecting to regular audio and video jacks
2 .7 C HAPTER T WO : I NSTALLATION I N S T A L L A T I O N Connecting a DVD Player, DTV Set-Top Box(480i, 480p, 1080i) The rear panel jacks on your TV make it easy to connect a DVD player (or DTV Set-TopBox) to your TV. Connecting to Y, P B , P R 1 Connect a set of audio cables betweenthe DVD audio ...
Page 22 - Installing Batteries in the Remote Control
2 .9 C HAPTER T WO : I NSTALLATION I N S T A L L A T I O N ▼ 3 Replace the cover. Remove the batteries and store them in a cool, dry place if you won’tbe using the remote control for along time. The remote control can be used upto about 23 feet from the TV. (Assuming typical TV usage, theBatteries l...
Page 23 - C h a p t e r T h r e e; P E R A T I O N; Turning the TV On and Off; You can also use the POWER button on the front panel.; Power
C HAPTER T HREE : TV O PERATION 3 .1 C h a p t e r T h r e e O P E R A T I O N Turning the TV On and Off Press the Power button. You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, five basic customer settings proceed automatically and s...
Page 24 - CH; Menu
3 .2 C HAPTER T HREE : TV O PERATION 4 Make sure that the antennais connected to the TV. And then press the VOL + or VOL - button to activate “Auto Program” or press theMENU button to skip. (refer to “Auto program” on page 3.6) Clock - - : - - am On Time - - : - - am Off Off Time - - : - - am Off Sl...
Page 25 - Using the Perfect Focus Feature; Notes; You can also select Perfect
C HAPTER T HREE : TV O PERATION 3 .3 Using the Perfect Focus Feature When the picture size is distorted after moving the TV set, use the Perfect Focus feature toadjust for the optimum picture size set in the Factory. Language : English Plug & PlayConvergenceCaptionTime Function 1 Press the Menu ...
Page 26 - Adjusting Manual Convergence
3 .4 C HAPTER T HREE : TV O PERATION O P E R A T I O N Adjusting Manual Convergence If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. First steps: Language : English Plug & Play...
Page 27 - Adjust Red Convergence
C HAPTER T HREE : TV O PERATION 3 .5 O P E R A T I O N 4 While “Red” is highlighted, press the VOL + button: A crosshair pattern will appear on the screen. After moving the cursor to the position you want to adjust using the number buttons 2(up), 4(left),6(right), 8(down) on the remote control, adju...
Page 28 - Viewing the Display; Viewing the Menus and On-Screen Displays; Viewing the Menus; Display
3 .6 C HAPTER T HREE : TV O PERATION O P E R A T I O N Viewing the Display The display identifies the current channel and the status of certain audio-video settings. ▼ The on-screen displays disappear after ten seconds. Viewing the Menus and On-Screen Displays Viewing the Menus ▼ 1 With the power on...
Page 29 - Selecting a Menu Language; Selecting the Antenna Input
C HAPTER T HREE : TV O PERATION 3 .7 O P E R A T I O N Selecting a Menu Language 2 Press the CH button to select “Language”, thenpress the VOL + or VOL - button to select the lan-guage. Press the Menu button to exit. Function Language : English Plug & PlayConvergenceCaptionTime 1 Press the Menu ...
Page 30 - Memorizing the Channels; and CH; Selecting the Video Signal-source
3 .8 C HAPTER T HREE : TV O PERATION O P E R A T I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH but- tons to scan through the channels. This elim...
Page 31 - Storing Channels in Memory (Automatic Method); The TV automatically cycles; Adding and Erasing Channels (Manual Method)
C HAPTER T HREE : TV O PERATION 3 .9 3 The TV will begin memorizing all of theavailable channels. After all the availablechannels are stored, theAuto program menu reap-pears. Press the Menubutton to exit. O P E R A T I O N Storing Channels in Memory (Automatic Method) ▼ The TV automatically cycles t...
Page 32 - Changing Channels; Using the Channel Buttons; When you press; or; , the TV changes channels in sequence. You will see all the chan-; Using the Number Buttons; Use the number buttons to quickly tune to any channel.; Using the Previous Channel
3 .10 C HAPTER T HREE : TV O PERATION O P E R A T I O N Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press CH or CH , the TV changes channels in sequence. You will see all the chan- nels that the TV has memorized. (The TV must have memorized at l...
Page 33 - Selecting Your Favorite Channels; quently watched channels.; To Store Your Favorite Channels:; To View Your Favorite Channels:; Note: Only memorized channels
C HAPTER T HREE : TV O PERATION 3 .11 O P E R A T I O N Selecting Your Favorite Channels You can store up to ten of your favorite channels for each available input source (such as TV and CATV). Then, when you press the Fav.CH button on the remote control, the TV displays only the favorite channels y...
Page 35 - Labeling the Channels; next to the channel number.; Note: You cannot select
C HAPTER T HREE : TV O PERATION 3 .13 O P E R A T I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num- ber, “*”, or a blank. When the DISPLAY bu...
Page 36 - Picture Control; Customizing the Picture; After adjusting an item, the
3 .14 C HAPTER T HREE : TV O PERATION O P E R A T I O N 1 Press the Menu button. The “Picture” icon will behighlighted, then press the VOL + or VOL - button repeat- edly, until the word “Custom”is selected. Mode : Custom Adjust Size : Wide Digital NR : Off Color tone : Normal Demonstration Picture P...
Page 37 - Using Automatic Picture Settings
C HAPTER T HREE : TV O PERATION 3 .15 O P E R A T I O N Using Automatic Picture Settings Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie”) that are preset at the factory. You can activate either Dynamic, Standard or Movie by pressing P.Mode(or by making a selection fro...
Page 38 - Selecting the Color Tone; Sound Control; Adjusting the Volume; Using Mute; Mute
3 .16 C HAPTER T HREE : TV O PERATION 1 Press the Menu button. The “Picture” icon willbe highlighted. Thenpress the VOL + button. Mode : Custom Adjust Size : Wide Digital NR : Off Color tone : Normal Demonstration Picture Selecting the Color Tone Sound Control Adjusting the Volume 2 Press the CH but...
Page 39 - Customizing the Sound
C HAPTER T HREE : TV O PERATION 3 .17 O P E R A T I O N 2 Press the VOL + or VOL - button repeatedly, until theword “Custom” is selected. (When Custom is selected,the words “Equalizer” willappear on the screen.) Sound Mode : Custom Equalizer S. Function MTS : Mono 3 Press the CH button to select “Eq...
Page 40 - Using Automatic Sound Settings
3 .18 C HAPTER T HREE : TV O PERATION Using Automatic Sound Settings Your TV has four automatic sound settings (“Standard,” “Music,” “Movie,” and “Speech”) thatare preset at the factory. You can activate either Standard, Music, Movie or Speech by press-ing the S.MODE button (or by making a selection...
Page 41 - Setting the Clock; When selecting the hours, be
C HAPTER T HREE : TV O PERATION 3 .19 O P E R A T I O N Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press Display.) 1 Press the Menu button. Press the CH button to select “Function”, ...
Page 42 - Viewing an External Signal Source
3 .20 C HAPTER T HREE : TV O PERATION O P E R A T I O N Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable). 1 Press the TV/Video button.You will switch betweenviewi...
Page 43 - C h a p t e r F o u r; P E C I A L; Fine Tuning Channels; After you adjust the fine tuning,
C HAPTER F OUR : S PECIAL F EATURES 4 .1 C h a p t e r F o u r S P E C I A L F E A T U R E S Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Select the appropriatechannel. Press the Menu button. Press the CH button to select the “Channel”, thenpr...
Page 44 - Digital Noise Reduction
4 .2 C HAPTER F OUR : S PECIAL F EATURES S P E C I A L F E A T U R E S Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital NoiseReduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the Menu button. Press...
Page 45 - Changing the Screen Size; Aspect; Zoom function operates only on Component 2 signals.
C HAPTER F OUR : S PECIAL F EATURES 4 .3 Changing the Screen Size Press the Aspect button to change the screen. S P E C I A L F E A T U R E S Notes • Changing the Screen size doesn’t work with Component1 2(480p) signals. Zoom function operates only on Component 2 signals. • Screen size cannot be cha...
Page 46 - Using the R.surf feature
4 .4 C HAPTER F OUR : S PECIAL F EATURES S P E C I A L F E A T U R E S Using the R.surf feature This feature allows you to set the TV to return to a particular channel after a certain amountof time. For example, you may be watching a channel when commercials start. You can setthe R.Surf to “5 minute...
Page 47 - Setting the On/Off Timer; Before using the timer, you must; When you set the hours, make
C HAPTER F OUR : S PECIAL F EATURES 4 .5 S P E C I A L F E A T U R E S Setting the On/Off Timer 1 Press the Menu button. Press the CH button to select “Function”, thenpress the VOL + button. Language : English Plug & PlayConvergenceCaptionTime Function ▼ Before using the timer, you must set the ...
Page 48 - To deactivate the “On time,”; Setting the Sleep Timer
4 .6 C HAPTER F OUR : S PECIAL F EATURES S P E C I A L F E A T U R E S 5 Press the VOL + button to select “On/Off.” Press the CH or CH button button to turn the on-timer “On.”(Repeatedly pressing the CH or CH button button will alternatebetween on and off.) When finished, press theVOL + button. Cloc...
Page 49 - • Surround; You can hear clear a melody sound when the TV is powered on or Off.; • BBE; Extra sound settings
C HAPTER F OUR : S PECIAL F EATURES 4 .7 S P E C I A L F E A T U R E S • Surround Your Samsung TV can create a "surround" effect such that the sound seems to comefrom all directions. Once the “Surround” is set to “On”, the setting applies to soundeffects such as Standard, Music, Movie and Sp...
Page 50 - The text at the bottom of the; Stereo
4 .8 C HAPTER F OUR : S PECIAL F EATURES S P E C I A L F E A T U R E S Choosing a Multi-Channel Sound (MTS)Soundtrack Depending on the particular program being broadcast, you can listen to stereo, mono, or aSeparate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAPha...
Page 51 - Viewing Closed Captions; and on the tape’s packaging:; Different channels and fields; caption mode; In; text mode; Quick way to access captions
C HAPTER F OUR : S PECIAL F EATURES 4 .9 S P E C I A L F E A T U R E S ▼ Misspellings and unusual characters sometimes occur dur-ing closed caption transmissions,especially those of live events.There may be a small delay beforecaptions appear when you changechannels. These are not malfunc-tions of t...
Page 52 - Quick way to access the PIP
4 .10 C HAPTER F OUR : S PECIAL F EATURES Viewing Picture-in-Picture You can use the PIP feature to simultaneously watch two video sources. Note: The PIP feature does not work with Component1, Component2 mode.When PIP is selected in the Zoom mode, the Mode is automatically converted into the Normal ...
Page 53 - Selecting a Signal Source (Antenna or Cable) for PIP; Quick way to access the signal
C HAPTER F OUR : S PECIAL F EATURES 4 .11 S P E C I A L F E A T U R E S 1 Press the Menu button. Press the CH button to select “PIP”, then pressthe VOL + button. PIP : On SOURCE : TV Size : Large Swap ANT/CATV : ANT Channel : ANT 4 PIP Selecting a Signal Source (Antenna or Cable) for PIP 2 Press the...
Page 54 - Swapping the Contents of the PIP Image and Main Image; Quick way to access swapping:; Changing the Size of the PIP Window
4 .12 C HAPTER F OUR : S PECIAL F EATURES 1 Press the Menu button. Press the CH button to select “PIP”, then press the VOL + button. PIP : On SOURCE : TV Size : Large Swap ANT/CATV : ANT Channel : ANT 4 PIP Swapping the Contents of the PIP Image and Main Image 2 Press the CH button to select “Swap,”...
Page 55 - Changing the PIP Channel; Changing the Location (Rotating) in PIP mode; Quick way to access PIP CH:; Note: The PIP channels are not available when RF is set to ANT-B.
C HAPTER F OUR : S PECIAL F EATURES 4 .13 S P E C I A L F E A T U R E S 1 Press the Menu button. Press the CH button to select “PIP”, then press the VOL + button PIP : On SOURCE : TV Size : Large Swap ANT/CATV : ANT Channel : ANT 4 PIP Changing the PIP Channel 2 Press the CH button to select “Channe...
Page 56 - Viewing the Demonstration
4 .14 C HAPTER F OUR : S PECIAL F EATURES S P E C I A L F E A T U R E S Viewing the Demonstration To become familiar with the various menus provided by your television, you can viewthe built-in demonstration. 1 Press the Menu button. Picture icon will behighlighted (blinking). Mode : Custom Adjust S...
Page 57 - Customizing Your Remote Control; Setting Up Your Remote Control to Operate Your VCR (or DVD); MODE; The remote control has four; When your remote control is
C HAPTER F OUR : S PECIAL F EATURES 4 .15 S P E C I A L F E A T U R E S Customizing Your Remote Control Your TV comes equipped with a “universal” remote control. In addition to controlling the TV, the universal remote can also operate most VCRs, DVDs and cableboxes (even if your VCR, cable box or DV...
Page 58 - Make sure you enter 3 digits of; If your cable box does not turn; Setting Up Your Remote Control to Operate Your Cable Box
4 .16 C HAPTER F OUR : S PECIAL F EATURES ▼ 4 Enter 3 digits of the cable box code listed below for your brand ofcable box . Make sure you enter 3 digits of the code, even if the first digit is a“0.” (If more than one code listed,try the first one.) ▼ 5 Press Power . Your cable box should turn on. I...
Page 59 - Cable Box
C HAPTER F OUR : S PECIAL F EATURES 4 .17 S P E C I A L F E A T U R E S Cable Box Codes VCR Codes DVD Codes Note: The remote control might not be compatible with all DVDPlayers, VCRs, and Cable boxes.
Page 60 - Identifying Problems; Note; C h a p t e r F i v e; R O U B L E S H O O T I N G; Problem
If the TV seems to have a problem, first try this list of possible problems and solutions. Ifnone of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Note If you watch a still image or the screen in the Normal(4:3) aspect ratio format for along time, imag...
Page 61 - Cleaning and Maintaining Your TV; Placement; such as vacuum cleaners.; Liquids; • Do not put heavy objects on top of the cabinet.; Temperature; Using Your TV in Another Country; P P E N D I X
A PPENDIX A .1 Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of service. Please follow theseguidelines to get the maximum performance from your TV. Placement • Do not place the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near ap...
Page 62 - E M O
