Page 2 - IMPORTANT SAFETY INSTRUCTIONS
Eng-2 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s...
Page 3 - CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
Graphic Symbol Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. T...
Page 4 - IMPORTANT SAFEGUARDS; Caution
Eng-4 IMPORTANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove thecover by yourself. (Control switches are at the front of the monitor.) 1. Read Instructions : All the sa...
Page 7 - FCC & ICES Information; Warning
Eng-7 18. Replacement Parts : When replacement parts are required be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire electric shock or other hazards. 19. Safety Check : U...
Page 8 - Information to user; the following two conditions: (1) this device may not cause harmful
Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC R...
Page 9 - IC Compliance Notice
Eng-9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C...
Page 10 - Contents; Chapter 1: System Components and Installation; -6) External terminal connecting method for; Chapter 2: MONITOR FRONT PANEL KEY Function and
Eng-10 Contents IMPORTANT SAFETY INSTRUCTIONS .................................. 2 IMPORTANT SAFEGUARDS ..................................................... 4 FCC & ICES Information .............................................................. 7 Chapter 1: System Components and Installation 1-...
Page 12 - -1) Environmental requirements for installation and safety; malfunction and reduce system downs due to environmental causes.
Eng-12 Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack. It should be used only when level and should not be ...
Page 14 - composition and installation method; c. Camera fitting groove
Eng-14 1-3) STANDARD CAMERA composition and installation method 1) Standard Camera composition (SOC-C120) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and t...
Page 15 - Outputs the sound signal.
Eng-15 f. Speaker Outputs the sound signal. 2) INSTALLING STANDARD CAMERA (SOC-C120) SOC-C120 camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110S). Choose an installation site that can sufficiently support the weight of the equipment to be installed. Attach ...
Page 16 - Operating Temperature :; onto the CAMERA MOUNT BRACKET.
Eng-16 3) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SOC-C120) (1) Overview CAMERA MOUNT BRACKET (SBR-110S) is used to attach the camera to a wall, ceiling or shelf. (2) Specifications Use : Indoor Installation : Wall or Ceiling Dimensions : 2.25 (W) X 1.86(H) X 3.95(L) inch Weight : 0.29 l...
Page 18 - connect; Connection status checking method :; The monitor's initial screen mode is quad.
Eng-18 After positioning the monitor and installing four cameras in the desired location, please connect the CAMERA to the MONITOR using the CAMERA CABLE (MCB-60) as shown in the figure below. Connection status checking method : • Turn on the monitor after connecting cameras, and check if camera ima...
Page 19 - -4) DOME CAMERA composition and installation method
Eng-19 a e c d b a Fixed Focus Lens Keeps the camera's lens free from dust and dirt. b Lens Assembly c Camera Frame Supports the camera. d Dome Cover Clear plastic cover that protects the camera. Take care not to scratch the cover. e 6Pin modular jack Used to connect the monitor. PIN NUMBER SPEC 1 N...
Page 21 - -5) PIR CAMERA composition and installation method; Lens; It outputs the sound signal which transferred from the monitor.; Fresnel Lens; Used to connect the camera to the monitor.
Eng-21 1-5) PIR CAMERA composition and installation method ( SOC-P120 ) 1) PIR Camera composition (SOC-P120) 3 5 4 1 2 <Top> <Bottom> ① Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. ➁ Speaker It outputs the sound signal which transfe...
Page 22 - Function Switch; A function switch for the PIR sensor operation.; PIR Sensor
Eng-22 8 6 7 9 <Inside> ➅ Function Switch A function switch for the PIR sensor operation. ⑦ PIR Sensor A thermal heat sensor that detects infrared radiation projected by warm objects. ⑧ Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the mo...
Page 29 - -7) Whole System connection and configuration
Eng-29 f) Not Used g) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. h) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. i) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. j) Connect the G (...
Page 32 - Front Panel; key on the FRONT PANEL,; KEY
Eng-32 Chapter 2: MONITOR FRONT PANEL KEY Function and Operation Front Panel 2-1) TALK KEY The TALK KEY allows voice signal tobe transmitted to an intended camera with built-in MIC on the front of the monitor. For this function, select a target camera with the ▲ / ▼ key on the FRONT PANEL, and press...
Page 34 - displayed. Users can move to a target area by using; ENTER; SWITCH is; It turns the monitor and camera ON/OFF at the same time. When
Eng-34 Eng-34 2-8) PIP- KEY Can be used to see the main screen while Single screen is displayed. The main screen can be changed and transfered to another channel while in PIP mode. Please refer to "CHAPTER 4. DISPLAY MODE setting method(Eng-88)" for PIP function and details. 2-9) FREEZE- KEY...
Page 36 - -1) ADJUST MENU function and setting method
Eng-36 Chapter 3: Setting each item function in the SETUP MENU Pressing the FRONT PANEL MENU button allows users to enter SETUP MENU and see the following menu OSD box. Setting method of each SETUP MENU function and operation is as follows. 3-1) ADJUST MENU function and setting method • Function: Al...
Page 41 - -7) NETWORK SETTING function and setting method; Static IP User; - Constituted by Static IP on the TCP/IP network; • Static
Eng-41 3-7) NETWORK SETTING function and setting method This section of the manual is intended for users who will install this security system in a network environment.If you have difficulty setting the network,we recommend contacting your network administrator. • Function: Allows users to select th...
Page 42 - CAUTION; A port number is reserved for TCP port and HTTP port setting.
Eng-42 5) After setting, move to the main screen by using the MENU BUTTON. 6) Set values will be stored as shown below. It takes 2 or 3 seconds. On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed. If the network connection is cancelled or cut, [S] starts blinking. 7) ...
Page 43 - DHCP User; - Constituted by Dynamic IP on the cable/xDSL modem network; DDNS to support the Dynamic IP.
DHCP User - Constituted by Dynamic IP on the cable/xDSL modem network You can use the SMO-211QN/SMO-150QN products through the network using Dynamic IP on cable/xDSL modem. In this case, it should be connected with DDNS to support the Dynamic IP. In case of a configuration using DHCP, as the connect...
Page 45 - At this time, you should add “s” in front of “mac address”.
Eng-45 8) Open your Internet Explorer web browser, type in the following in the URL window and press Enter. http://sff0000.websamsung.net Where ff0000 is the MAC address of your SMO-211QN/SMO-150QN in this example. If your SMO-211QN/SMO-150QN’s MAC address is ff0001, then type in ff0001 instead of f...
Page 46 - ) MOVE TO EACH item by using
Eng-46 DSL User (PPPoE) SMO-211QN/SMO-150QN products can be used on the network using IP through PPPoE (DSL). In case of a configuration using PPPoE, SMO-211QN/SMO-150QN connection is made through the domain names (EX : http://sff0000.websamsung.net) that are automatically registered in Samsung's DD...
Page 47 - Name or Password, commection is impossible.; ID and PASSWORD
Eng-47 4) When the PPPoE (DSL) type in the User Name and Password (and Confirm Password) given to you by the DSL Service Provider. CAUTION When using DSL (ISP-internet service provider) you must type correct User Name and Password to connect to SMO-211QN/SMO-150QN. If you type an incorrect User Name...
Page 49 - after DSL Modem’s power ON.; in the URL window press ENTER.
Eng-49 CAUTION The connection to SMO-211QN/SMO-150QN is unavailable for about 2~5 minutes after DSL Modem’s power ON. Since the connection is not available, as the IP is not received from DSL communica- tions, please reboot by turning off the power of DSL Modem and SMO-211QN/SMO-150QN for more than ...
Page 51 - - Remote Viewer Function Buttons
Eng-51 3-8-1) “LIVE” MENU - CAMERA SELECT Initial display mode of monitor if QUAD A. - Remote Viewer Function Buttons KEY Type Function Choose a camera by channel Ch 1 ~ Ch 8 4 Cameras are supplied. You can connect 4 additional cameras if desired. NEXT CHANNEL SINGLE MODE (ch1 Default selected) 320 ...
Page 52 - - SINGLE SCREEN DISPLAY
Eng-52 PLAY STOP LIVE MODE change ADMIN MODE change - SINGLE SCREEN DISPLAY If users want to see the camera image at full mode,or smaller mode, Select a target camera with NEXT channel or CHANNEL SELECT keys. After camera selection, camera image can be displayed at full screen. * AT SINGLE DISPLAY -...
Page 56 - Player will be installed together when it is connected to
Eng-56 3. PLAYER - Player installation/execution/deletion - Installation Player will be installed together when it is connected to SMO-211QN/SMO-150QN. - Execution (Follow the instruction to execute it separately.) Click Start —> Program —> Smart Webviewer For WEB-MON —> Player. (Fig. 3 ) F...
Page 57 - - Program screen configuration
Eng-57 - Program screen configuration - How to play 1. Playback File - Open... Selecting this, you can choose between fmp4(moving image file) or fmpi(still image file) in the window as shown below.
Page 60 - Select Print and press ‘OK’.
Eng-60 Type in the phrase you added in ‘Description’. Then press the ‘OK’ button. Select Print and press ‘OK’.
Page 61 - Admin Menu; trators, and will be using the system in a network environment.; Admin Menu Entering; ) Click the Admin menu and a login window will appear.
Admin Menu The following pages are geared towards advanced users who function as network adminid- trators, and will be using the system in a network environment. It is an administrator’s menu to set the general items on SMO-211QN/SMO-150QN Server. To use this menu, you need the administrator’s ID an...
Page 63 - Admin Menu Structure; Category
• Admin Menu Structure Eng-63 Category Main Menu System Configuration System Information Admin. Password Access Limitation User Registration Video Alarm Notification Network Configuration Network Configuration PPPoE (DSL) Network Ports View Network Status Network Status Notification DDNS Configurati...
Page 64 - System Information
Eng-64 3-8-2) System Configuration Menu. 1. System Information In this menu, you can check the information on the system including the name of the SMO-211QN/SMO-150QN Server. Server name can be changed if desired. - Menu Configuration After completing setting, click Apply button. If you click the ba...
Page 65 - root
2. Admin Password In this menu, the administrator (root) password can be changed. - Menu Configuration After completing setting, click Apply button. The new password will be applied. The user needs to log in again by using the new password. Administrator’s ID Administrator’s ID is always “ root ”. O...
Page 66 - Access Configuration
Eng-66 3. Access Configuration This menu is to set the targets the SMO-211QN/SMO-150QN Server can have a access to. - Menu Configuration After completing setting, click Apply button. Access Limitation This is to set limit for the frame speed for users who are registered in the system, to join and vi...
Page 69 - After completing setting, click Apply button.
Eng-69 5. Video Configuration This is to set the data to be added in the video configuration and set an environment for each channel. - Menu Configuration After completing setting, click Apply button. Image Size This is to choose the size of the video data image .You can choose between 2 size (Small...
Page 72 - Network Configuration
Eng-72 3-8-3) Network Configuration Menu. 1. Network Configuration On this menu, you can fix the general environment related to the network of the SMO-211QN/SMO-150QN Server and check the present status. - Menu Configuration Network Configuration Set “Static IP” or “DHCP”. PPPoE(DSL) Set PPPoE (DSL)...
Page 73 - ) Type in the addresses of DNS 1 and DNS 2.
Eng-73 1-1. Network Configuration : Static IP / DHCP Client 1) If the IP of the SMO-211QN/SMO-150QN Server is Static : Choose “Static IP”. 2) Type in the IP Address you want to assign to the SMO-211QN/SMO-150QN Server, NetMask, GateWay, DNS1, and DNS2 addresses. 1-2. Network Configuration : Static I...
Page 75 - DNS is a default value, so it does not need to change.
Eng-75 2. PPPoE (DSL) for Eth0 1) Service : Decide if you want to try PPPoE Connection or not. 2) User ID : User’s ID that is registered in the ISP. 3) User Password : User’s password that is registered in the ISP. 4) Confirm Password : Confirm the password. 5) DNS (Domain Name Service) : Service to...
Page 76 - Network Ports Configuration; cates with a Client PC.; connecting to a network with firewalls.
Eng-76 3. Network Ports Configuration It sets the HTTP Port number to use when the SMO-211QN/SMO-150QN Server communi- cates with a Client PC. The present SMO-211QN/SMO-150QN Server uses HTTP Port (80). - HTTP Port 1) This is the port the Client PC uses to connect to the web page of the SMO-211QN/SM...
Page 79 - delivers it to the receiver.
Eng-79 Network Status Notify Configuration click “Network Status Notify” in the Network Configuration group. Choose to use the Mail Notification function or not. Choose “Enable” if you want to notify the network status of the SMO-211QN/SMO-150QN Server to people who through e-mails. Type the address...
Page 83 - Save Configuration; This menu is to save all of the present setting in the Flash Memory.
Eng-83 1. Save Configuration This menu is to save all of the present setting in the Flash Memory. If you changed any of the settings for the SMO-211QN/SMO-150QN, it is recommended that you save it in the Flash Memory in this menu.
Page 86 - Click “Cancel” to stop updating.
Eng-86 3-2. All (kernel, RAM disk, System, Web) Update When you click the start button located, a window will appear to ask if you want to update. Click “Cancel” to stop updating. 1. “OK” to proceed updating. 2. A pop-up window will appear. Choose “Zimage-ve” in the browser.
Page 87 - Click “Next” button to move to the next stage.
Eng-87 3. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file.
Page 90 - Click “Next” button to move to the next stage.
Eng-90 6. In the next stage, a pop-up window will appear for the file searching process for the System Image Update. Choose “fw_2pq-ve.tar.gz” in the browser. 7. Click “Next” button to move to the next stage.
Page 94 - -9) VIEW EVENT LOG MENU function and setting method; Displays the time and date of camera event and type of event.; the next page by using; SWITCH. A total of 64 events can be listed.
Eng-94 06/01/03 13:14:00 NO CH MM/DD/YY HH:MM:SS EVT 01 07 02/10/03 10:00:30 A 02 01 02/11/03 11:22:00 L 03 01 06/01/03 12:33:01 - 04 02 06/01/03 13:01:03 - 05 01 --/--/-- --:--:-- - 06 01 --/--/-- --:--:-- - 07 01 --/--/-- --:--:-- - 08 01 --/--/-- --:--:-- - 3-9) VIEW EVENT LOG MENU function and s...
Page 95 - Chapter 4: DISPLAY MODE setting method; mode, select a target camera by using
Eng-95 Chapter 4: DISPLAY MODE setting method 4-1) SINGLE SCREEN DISPLAY Initial display mode of monitor is QUAD - A. If you want to see the camera image at full mode, select a target camera by using ▲ / ▼ KEY. After that, press the ENTER SWITCH and selected camera image will be displayed at full sc...
Page 96 - * QUAD MODE display from SINGLE MODE or SEQUENCE MODE,
Eng-96 4-2) QUAD MODE DISPLAY Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD DISPLAY MODE, or QUAD - A (QUAD - B) to QUAD - B (QUAD - A), or PIP MODE to QUAD MODE, press the QUAD/PAGE KEY. * QUAD MODE display from SINGLE MODE or SEQUENCE MODE, CH3 CH3 DISPLAY QUAD MODE DISP...
Page 98 - selected in DISPLAY MENU in SETUP MENU.; and
Eng-98 4-4) PIP MODE DISPLAY Can be used to see PIP screen in Single screen mode. If you press the SEQUENCE on PIP screen ,the Sub- screen will change. If you press the ▲ / ▼ KEY,the main screen can be transferred to another channel. Sub-screen location can be selected in DISPLAY MENU in SETUP MENU....
Page 99 - Zoom areas on the screen in SINGLE DISPLAY MODE are nine.)
Eng-99 4-5) ZOOM MODE DISPLAY When users want to see a zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by using ▲ / ▼ KEY, and press the ENTER SWITCH, then, the selected area will be displayed at full single mode...
Page 100 - Chapter 5: Product features
Eng-100 Chapter 5: Product features SOC-C120 : Standard Camera Model Name Broadcasting System Imaging Device Effective Pixels S Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure Audio I/O Connectors Operating Temperature Power Source Po...
Page 103 - OBSERVATION MONITOR
Eng-103 Video Input Video Output Audio Input Audio Output Alarm/Motion Features: Connected to Alarm Box/Camera Sequence Event List Display mode Horizontal Resolution Operation Temperature CRT Dimension (W x D x H (inch)) Weight Power consumption Video system Operation Humidity Range AC Input Ranges ...
Page 104 - NETWORK
Eng-104 NETWORK • 32bit Embedded Processor • Flash Memory : 8Mbytes • SDRAM : 32Mbytes • HTTP, TCP/IP, FTP, Telnet, ARP, PPP, DHCP, PPPoE • Compression Algorithm : Real-time fmpi • Rate : 30 fps for each channel • Quality : 3 levels • NTSC • NTSC, 352x240, 704x240 • Max 30 Frame Per Second (NTSC) • ...
Page 105 - A unique MAC address is registered to this device.
Eng-105 The system performance may decrease if the computer has lower specification than the recom-mendations, is not installed with the latest service pack, or has an illegally installed operationsystem(OS). A unique MAC address is registered to this device. If the administrator setting and monitor...
Page 106 - Appendix A) Software up data; The initial screen of Samsung Electronics’ web site is as follows.
Eng-106 Appendix A) Software up data The initial screen of Samsung Electronics’ web site is as follows. 1. http://www.securitysamsung.com http://www.samsung.com/Products/CCTV.htm 2. Network Security in Homepage 3. Download the following items for SMO-211QN/SMO-150QN. ! Owner’s manual - SMO-211QN/SMO...
Page 107 - Appendix B) IP Router Setup Guide; Refer to Router User’s Manual for the detailed router setup.
Eng-107 Appendix B) IP Router Setup Guide List of Routers compatible with SMO-211QN/SMO-150QN. Refer to Router User’s Manual for the detailed router setup. Step-by-Step Examples : Linksys (Model : WRT54G) Netgear (Model : WGR614v4) D-Link (Model : DI-624+) SMC (Model : 7004VBR) CAUTION Other routers...
Page 108 - Linksys model WRT54G
Eng-108 Step-by-Step Setup Example of IP Router Linksys model WRT54G 1. Click the “Application and Gaming” tab. 2. Click “Port Range Forward”. 3. Port forwarding Row #1 : ! Application : Set this to “HTTP” @ Start and End : Set both to “From 10000 to 65535” # Protocol : Select “TCP” $ IP Address : S...
Page 112 - Printed in China
Part No.: AA68-03602A-01 Printed in China HEADQUARTERS105 Challenger RoadRidgefield Park, NJ 07660-0511TEL:1-800-SAMSUNGSERVICE DIVISION400 Valley Road,Suite 201Mount Arlington, NJ 078561-800-SAMSUNG(1-800-726-7864)www.samsung.com