Page 2 - overview; KEY FEATURES
2_ overview overview KEY FEATURES Display Real Time Display of Each Channel Auto Sequence display of 4 channels PIP (Picture in Picture) Pause Mode 2X ZOOM Quick Switch between Live and Playback Screen PTZ Camera supported Record Up to 3 Levels of Quality and Frame Rates Audio Recording Scheduled Re...
Page 3 - English; OVER; IMPORTANT SAFETY INSTRUCTIONS; Standards Approvals
English _3 OVER VIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit.Follow all the safety instructions listed below.Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Fo...
Page 4 - BEFORE START; Warning; Battery; System Shutdown; SHUTDOWN; Operating Temperature
4_ overview overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like.You have to keep in mind the following notices: SEC retains the copyright on this manual. This manual can...
Page 5 - What’s Included
English _5 OVER VIEW What’s Included Unpack the product package and put down the product on a fl at fl oor or in an installation place.Check if all components of the package are included. SHR-3040 DVR Remote Control/Battery (AAAX2) Mouse Installation CD User’s Manual AC Adaptor/Power Cable
Page 6 - OVERVIEW; CONTENTS; SETUP
6_ overview overview OVERVIEW 2 2 Key Features 3 Important Safety Instructions 4 Before Start 6 Contents 8 Front Panel 9 Rear Panel 10 Remote Control at a Glance INSTALLATION 11 11 Checking the Installation Environment 12 Installing HDD 13 Connecting to a Different Device 14 Network Connection 14 US...
Page 7 - WEB VIEWER
English _7 OVER VIEW WEB VIEWER 51 51 What is Web Viewer? 51 Connecting to the Web Viewer 52 Web Viewer at a Glance 53 Client Setup 54 Remote Setup 56 Backup 56 Player 59 Remote Viewer 62 Search APPENDIX 63 63 Product Specifi cation 65 Appearance & Dimension 66 Troubleshooting (FAQ)
Page 8 - FRONT PANEL
8_ overview overview FRONT PANEL Item Description USB Port Used to connect a USB memory device. LED Power Displays the status of the system power. HDD Blinks when a hard disk is accessed. Play Plays video backward. REC Starts or ends recording. Plays video forward. ► Plays a recorded channel f...
Page 9 - REAR PANEL
English _9 OVER VIEW REAR PANEL Item Description AUDIO IN Audio signal input port. (RCA jack) AUDIO OUT Audio signal output port. (RCA jack) RS-485 Connector for an RS-485-based external device. (Pan/Tilt/Zoom) ALARM Output Alarm output port. ALARM Input Alarm input terminal. VGA Video output port...
Page 10 - REMOTE CONTROL AT A GLANCE
10_ overview overview REMOTE CONTROL AT A GLANCE SEARCH The Search menu appears. PTZ The PTZ control menu appears. FUNC The Launcher menu appears. AUDIO Turns on or off the sound. CH +/- Moves the channel up or down. SEQ Switches to auto sequence mode. FRZ Freezes the screen temporarily. Menu Opens ...
Page 11 - INST; installation; CHECKING THE INSTALLATION ENVIRONMENT
English _11 INST ALLA TION installation Please be noticed with the followings before you use the product. Do not use the product outdoor.Do not spill water or liquid in the connection part of the product.Do not impose the system to excessive shock or force. Do not pull out the power plug forcefull...
Page 12 - INSTALLING HDD
12_ installation installation INSTALLING HDD You can install a separate HDD if your recorder has no built-in HDD. Loosen the screws in the left and right sides and remove the cover. Use the SATA data cable to connect the main board with the HDD, and connect the HDD power cable. Attach the HDD cushio...
Page 13 - CONNECTING TO A DIFFERENT DEVICE; Connecting RS-485 device; FUNCTION; Connecting Alarm output; COM; Connecting Alarm Input; GND
English _13 INST ALLA TION CONNECTING TO A DIFFERENT DEVICE Connecting to video, audio, and monitor Connecting to RS-485, alarm Connecting RS-485 device Connection port used to control an external device such as the PTZ and speed dome camera. Connect the external device to the RS-485 port (PIN 1:-...
Page 14 - NETWORK CONNECTION
14_ installation installation NETWORK CONNECTION You can use the Ethernet connector to connect to the network.Connecting to the network consisting of multiple computers enables you to perform various functions including remote monitoring, remote search, and remote control. USB CONNECTION The DVR has...
Page 15 - live; LIVE; Getting Started; ENTER
English _15 LIVE live LIVE Getting Started Connect the power cable of the DVR to the wall outlet.When it turns on, the system gets started automatically. Login To access a DVR or restricted menu, you should have logged in to the DVR. In Live Screen, right-click any area of the screen.The Control i...
Page 16 - Live Screen Confi guration
16_ live live Live Screen Confi guration You can check the status or operation of the DVR with the icons on the live screen. Item Description Current Date, Time Displays the current time and date. Live Screen Status Displays the audio output status. Displays the status of PTZ, PIP, ZOOM, SEQ, and FR...
Page 17 - View the Launcher Menu; FUNC
English _17 LIVE View the Launcher Menu You can use the Launcher menu appearing on the bottom of the live screen to access it. In Live mode, right-click any area or press the [ FUNC ] button on the remote control.The Launcher menu appears in the bottom. Move the cursor over the bottom, and click a...
Page 18 - MODE SWITCH; MODE; PIP DISPLAY; PIP
18_ live live MODE SWITCH You can use the channel buttons on the remote control or the front panel to switch to a single or 4-split mode for each channel. Press the channel button on the front panel, remote control or control icon, or click the channel icon in the Launcher menu.The selected channel ...
Page 19 - ZOOM; AUTO SEQUENCE; FREEZE
English _19 LIVE ZOOM This is available in Live mode where the screen of the selected channel will be enlarged by 2x. Press and hold the [ ZOOM ] button on the remote control or the front panel, or click < > in the Launcher menu.The selected channel will be enlarged by 2x, while CH 1 will be...
Page 20 - RECORD; REC; PTZ
20_ live live RECORD You can make recording manually in Live mode. Other than in manual mode, recording will proceed as set in the Schedule menu. Press the [ REC ] button on the remote control or the front panel, or click < > in the Launcher menu. Recording will start while the button switches...
Page 21 - SEARCH; Percent Search; TARGET
English _21 LIVE SEARCH You can perform the search for recorded data by the time or by the search criteria such as an event. Press the [ SEARCH ] button on the remote control, or click < > in the Launcher menu. The Search menu appears. Use the direction buttons on the remote control or the f...
Page 22 - Event Search; EVENT SEARCH; PLAY
22_ live live Event Search You can check and search for contents of a list of events such as alarm, motion detection, and video loss. Select < EVENT SEARCH > to display a list of events with information of the occurrence time and date. If you select an event to play, the selected event will be...
Page 23 - EVENT MONITORING; To set the event update; INTERVAL SETUP > EVENT UPDATE; To update the event list
English _23 LIVE EVENT MONITORING This will display a specifi c event such as alarm and event on the screen of each channel. The event will be displayed regardless of the schedule setting. To set the event update Specify a time in “ MAIN MENU > CONFIGURATION > INTERVAL SETUP > EVENT UPDAT...
Page 24 - EVENT MONITORING ON THE SPOT MONITOR; EXTERNAL DEVICE; Spot Event Popup
24_ live live EVENT MONITORING ON THE SPOT MONITOR Apart from the Live screen, you can use the spot monitor to monitor an event from a specifi c channel through the SPOT OUT port. Specify an interval and use of the popup in “ EXTERNAL DEVICE > SPOT SETUP ”. According to your settings, the spot mo...
Page 25 - setup; USING THE MENU; Using the mouse; Using the buttons on the remote control or the front panel; MENU; MAIN MENU
English _25 SETUP setup USING THE MENU You can confi gure the menu settings of screen display, record, confi guration, external device, backup, language, fi rmware upgrade and system reset. You can use the remote control or mouse to select each one of the menu items above.To fast access a desired ...
Page 26 - DISPLAY SETUP; VGA Setup
26_ setup setup DISPLAY SETUP You can confi gure the settings of VGA, Screen Display and OSD. VGA Setup Press the [ MENU ] button on the remote control or the front panel.The “ DVR LOG-IN ” dialog appears. Enter the password and select < ENTER >. The “ MAIN MENU ” screen appears. Use the up/do...
Page 27 - Screen Display Setup; OSD Setup
English _27 SETUP Screen Display Setup See the previous section to repeat steps 1~3. (Page 26) Use the up/down ( ▲▼ ) button to select < SCREEN DISPLAY >, and press [ OK ]. The “ SCREEN DISPLAY ” screen appears. Use the up/down ( ▲▼ ) button to move to a desired item. VERTICAL POSITION: Used...
Page 28 - Record Setup
28_ setup setup Use the up/down ( ▲▼ ) button to set the “ TOP OSD OFFSET ”. The icon bar in the upper corner of the Live screen will be removed up or down. When done, select < OK >. Your setting will be applied.If you select < DEFAULT >, the settings will be restored to the factory defa...
Page 29 - Schedule Setup
English _29 SETUP PRE ALARM RECORD: In event recording, set the advance recording time before an actual event. Pre alarm settings will be changed according to the frame rate. HDD REMAINING: Shows the remaining and total capacity of the current HDD. TIME REMAINING: Displays the expected recordable ...
Page 30 - CONFIGURATION; HDD Management
30_ setup setup CONFIGURATION You can confi gure the settings of HDD, Camera, Motion, Alarm, Interval, Date/Time, Password, and Buzzer. HDD Management You can check the HDD model and its capacity, and set the Overwrite option and reset the HDD. Press the [ MENU ] button on the remote control or the ...
Page 31 - Camera Setup
English _31 SETUP Camera Setup See the previous section to repeat steps 1~3. (Page 30) Use the up/down ( ▲▼ ) button to select < CAMERA SETUP >, and press [ OK ]. The “ CAMERA SETUP ” screen appears. Use the up/down ( ▲▼ ) button to move to a desired item. CHANNEL: Select a channel to change...
Page 32 - Motion Setup; Alarm Setup
32_ setup setup Motion Setup You can specify an area to detect a motion.If you select an area to detect a motion, the DVR will detect any motion occurring in that area. See the previous section to repeat steps 1~3. (Page 30) Use the up/down ( ▲▼ ) button to select < MOTION SETUP >, and press [...
Page 33 - Interval Setup
English _33 SETUP Use the up/down ( ▲▼ ) button to move to a desired item. CHANNEL: Select a channel to set the alarm. You can set the alarm for only one channel. TYPE: Set the sensor input system. < DISABLE > : The sensor does not work. < NORMAL OPEN > : The sensor is always open. The...
Page 34 - Password Setup
34_ setup setup Date/Time Setup You can confi gure the settings of Date/Time, Format, and Daylight Saving. See the previous section to repeat steps 1~3. (Page 30) Use the up/down ( ▲▼ ) button to select < DATE/TIME SETUP >, and press [ OK ]. The “ DATE/TIME SETUP ” screen appears. Use the up/d...
Page 35 - Buzzer Setup
English _35 SETUP Use the up/down ( ▲▼ ) button to move to a desired item. USER ID: Select a user ID.You will have a total of 10 IDs available including Admin. ADMIN: The administrator can set and perform all features of the DVR. MANAGER: Can change the password and perform backup. Can access menu...
Page 36 - IP Setup
36_ setup setup EXTERNAL DEVICE You can confi gure the settings of Network, PTZ, Mouse, Audio, and Spot output. TCP/IP Setup You can view the Live screen, confi gure the DVR settings, and backup HDD data remotely via the network. IP Setup Press the [ MENU ] button on the remote control or the front ...
Page 37 - DDNS Setup
English _37 SETUP Use the up/down ( ▲▼ ) button to move to a desired item. MAC ADDRESS: Shows information of the network that is assigned to the DVR. DHCP MODE: If you set this to < AUTO >, IP address and other network settings will be assigned from the DHCP server. (Only the IP port can be ...
Page 38 - PTZ Setup; Command Setup
38_ setup setup PTZ Setup You can set the model, ID and speed of the PTZ camera for each channel including the size and cord. Command Setup See the previous section to repeat steps 1~3. (Page 36) Use the up/down ( ▲▼ ) button to select < PTZ SETUP >, and press [ OK ]. The “ PTZ SETUP ” screen ...
Page 39 - Speed Setup
English _39 SETUP Speed Setup You can set the pan and tilt speed of the PTZ camera. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ( ▲▼ ) button to select < PTZ SETUP >, and press [ OK ]. The “ PTZ SETUP ” screen appears. Use the up/down ( ▲▼ ) button to select < ...
Page 40 - Mouse Setup
40_ setup setup Mouse Setup You can adjust the operational sensitivity of the cursor. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ( ▲▼ ) button to select < MOUSE SETUP >, and press [ OK ]. The “ MOUSE SETUP ” screen appears. Specify the < SENSITIVITY >. The hi...
Page 41 - Audio Setup
English _41 SETUP Audio Setup You can adjust the I/O volume for the channel. During video recording, sound from the selected channel will be recorded as well. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ( ▲▼ ) button to select < AUDIO SETUP >, and press [ OK ]. Th...
Page 42 - BACKUP; Backup
42_ setup setup Use the up/down ( ▲▼ ) button to move to a desired item. SWITCHING INTERVAL: Specify the switching interval for the spot monitor. ALARM POPUP: Set to display a popup message if an alarm signal is detected. MOTION POPUP: Set to display a popup message if a motion signal is detected. E...
Page 43 - PLAYER; System Messages
English _43 SETUP Specify the start time, date range and size to backup. You can specify the backup size for a backup device. The end time and date will be set according to the backup size. You can change the start time and date if you want to. Select < BACK-UP >. USB backup gets started. Du...
Page 44 - FIRMWARE UPGRADE; Upgrade
44_ setup setup FIRMWARE UPGRADE You can upgrade the DVR fi rmware with the latest version. Upgrade Press the [ MENU ] button on the front panel or remote control.The “ DVR LOG-IN ” dialog appears. Enter the password and select < ENTER >. The “ MAIN MENU ” screen appears. Use the up/down ( ▲▼ ...
Page 45 - FACTORY DEFAULT; Factory Default; Changing Factory Default
English _45 SETUP FACTORY DEFAULT You can restore the settings to the factory default. Factory Default Press the [ MENU ] button on the front panel or remote control.The “ DVR LOG-IN ” dialog appears. Enter the password and select < ENTER >. The “ MAIN MENU ” screen appears. Use the up/down ...
Page 46 - Load Setup; LOAD SETUP; LANGUAGE
46_ setup setup Load Setup Connect the USB device where your settings are saved. Select < LOAD SETUP >. The DVR settings will be changed to your settings with a message of “ LOAD SETUP SUCCESS ” on the screen. It takes 5 to 10 seconds, depending on the USB device. This will change the DVR sett...
Page 47 - NETWORK CONNECTION AND SETTINGS; Connection; If connecting to a local network using a router; If the HTTP port is other than 80; Connecting via URL; Connecting via URL - If the HTTP port is other than 80
English _47 SETUP NETWORK CONNECTION AND SETTINGS Network settings differ depending on the connection mode, so check your network connection mode before proceeding. Connection If connecting to a local network using a router Launch the Internet browser. Provide an IP address in the address bar.Ex) ...
Page 48 - If you are not using a router for network connection; Static IP Mode; DHCP MODE
48_ setup setup If you are not using a router for network connection Static IP Mode You can establish a direct connection, or connect DVR and remote users in a LAN environment. Set < DHCP MODE > to < MANUAL > in “ MAIN MENU > EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP ”. For info...
Page 49 - If using a router; Using DVR Static IP; Router DHCP IP Address
English _49 SETUP If using a router Check the followings to prevent a possible confl ict with the static IP of the DVR. Using DVR Static IP Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router in the LAN environment. DVR Network Set < DHCP MOD...
Page 50 - Port Forwarding with IP/Port Router; EXTERNAL PORT RANGE; Port Forwarding of Web Server Port Router; MAIN MENU > EXTERNAL
50_ setup setup Port Forwarding with IP/Port Router Enter the port forwarding setup menu of the router you use. Port range for external use: Enter the IP port range specifi ed in “ MAIN MENU > EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP ” of the connected DVR. The IP / port can differ if mult...
Page 51 - web viewer; System Requirements; CONNECTING TO THE WEB VIEWER; Install ActiveX Control...
English _51 WEB VIEWER web viewer WHAT IS WEB VIEWER? Web Viewer enables you to connect to the DVR remotely and transfer live video, play and backup recording data, and confi gure settings remotely. System Requirements The minimum hardware / operating system requirements to operate the Web Viewer ...
Page 52 - WEB VIEWER AT A GLANCE
52_ web viewer web viewer WEB VIEWER AT A GLANCE Item Description CLIENT SETUP Allows you to add/edit information necessary for network connection of the Web Viewer. REMOTE SETUP Enables you to confi gure some settings of the DVR from a remote PC. BACKUP Copies video data of the DVR to the PC. PLAYE...
Page 53 - Web Viewer Setup; To register a web site; CLIENT SETUP; Update; UPDATE; Others
English _53 WEB VIEWER CLIENT SETUP Allows you to add/edit information necessary for network connection of the Web Viewer. Web Viewer Setup To register a web site Click < CLIENT SETUP >. Click < REGISTERING SITE >. The “ CLIENT SETUP ” screen appears. Provide information about the site...
Page 54 - REMOTE SETUP
54_ web viewer web viewer REMOTE SETUP You can confi gure some settings of a remotely connected DVR. Click < REMOTE SETUP >. Select < MANUAL > and provide a value for < ADDRESS >, < PORT NUMBER >, and < ID > respectively. Information of the DVR with the fi rst connected...
Page 55 - INTERVAL SETUP; Record Confi guration; RECORD SETUP; Record Schedule; SCHEDULE SETUP
English _55 WEB VIEWER Interval Setup You can set the sequence screen time, or event record time. Refer to “ INTERVAL SETUP ”. (Page 33) Record Confi guration You can set the recording quality. Refer to “ RECORD SETUP ”. (Page 28) Record Schedule You can set the recording schedule. Refer to “ SCHE...
Page 57 - Player at a Glance
English _57 WEB VIEWER Player at a Glance Item Description System Time Displays the system time. Status Pane Displays the backup start and end date/time with the operation status. SCREEN DIVISION You can select full screen or 4-split mode. CHANNEL The selected channel will be displayed in Single s...
Page 58 - Image EDIT; OPEN; EDIT; EDIT TOOL
58_ web viewer web viewer Image EDIT Click < OPEN > and select a backup fi le to play. Switch to Single Screen mode and click < EDIT >. The “ EDIT TOOL ” window appears. When done, click < EDIT >. Switch to backup play mode. EDIT TOOL Contrast Adjust a bright area to brighter, and ...
Page 59 - AVI SAVE; REMOTE VIEWER
English _59 WEB VIEWER AVI SAVE Click < AVI SAVE >. The “ OPTION ” window appears. Set the options to your preference. CHANNEL: Select a channel to save. FRAMERATE: Set the frame rate for a video to save. SIZE: Set the size of a video to save. The size will be set automatically according to ...
Page 60 - Remote Viewer at a Glance
60_ web viewer web viewer Remote Viewer at a Glance Item Description DVR Connection Information Provide information required to connect to the network. System Information Displays information about DVR connection and system operation. SCREEN DIVISION You can select Single screen or 4-split mode. CHA...
Page 62 - EVENT
62_ web viewer web viewer SEARCH Click < SEARCH >. The “ SEARCH ” window appears. Enter the < PW > and click < CONNECT >. Ensure that you have provided < IP >, < PORT > and < ID >. Specify the start time in the < SEARCH TIME > bar. If you do not specify the ...
Page 63 - APPENDIX; appendix; PRODUCT SPECIFICATION
APPENDIX English _63 appendix PRODUCT SPECIFICATION Item Details System Language Multi language Support English, German, French, Spanish, Italian, Russian, Portuguese, Japanese etc. Event Log • OS - Resolution CIF (NTSC : 352x240 / PAL : 352x288) Live/Record Rate NTSC 120/120 ips (PAL 100/100 ips)...
Page 65 - APPEARANCE & DIMENSION
APPENDIX English _65 APPEARANCE & DIMENSION 258 247 371