Page 2 - 6 Channel DVR; User Manual
Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective co...
Page 3 - English; over; imporTAnT SAfeTy inSTruCTionS; Follow all the safety instructions listed below.; overview
English _3 ! over view imporTAnT SAfeTy inSTruCTionS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.1) Read these instructions.2) Keep these instructions.3) Heed all warn...
Page 4 - CAUTION; RISK OF ELECTRIC SHOCK.; CAuTion; damage to the product.
4_ overview overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAuTion : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric ...
Page 5 - Before STArT; warning; Battery; Caution; System Shutdown; Shutdown; operating Temperature; CALiforniA uSA onLy
English _5 ! over view Before STArT This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manua...
Page 6 - ConTenTS
6_ overview overview ConTenTS overview 3 3 Important Safety Instructions 5 Before Start 6 Contents 8 Features 11 Part Names and Functions (Front) 12 Part Names and Functions (Rear) 13 Remote Control ConneCTinG wiTh oTher deviCe 15 15 installation 15 Checking the Installation Environment 16 Connectin...
Page 7 - weB viewer
English _7 ! over view SeArCh & pLAy 75 75 Search 78 Playback weB viewer 80 80 Introducing Web Viewer 81 Connecting Web Viewer (Mac) 82 Using Live Viewer (Mac) 83 Connecting Web Viewer (Windows) 84 Using Live Viewer (Windows) 90 Using Search Viewer 94 Viewer Setup 105 About 106 Mobile Viewer BAC...
Page 8 - feATureS; Standards Approvals; operated in a commercial environment.
8_ overview overview feATureS The DVR employs H.264 video encoding for 8 or 16 channel inputs and G.711 audio encoding for 8 or 16 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC tran...
Page 9 - package Contents
English _9 ! over view package Contents Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. ❖ SdS-p5101/p5100 package DVR (1SET) Adapter (1EA) / Power Cable (1EA) Mouse (1EA) ...
Page 12 - Input port for the composite video signal.
12_ overview overview pArT nAmeS And funCTionS (reAr) Sdr-4100 Sdr-5100 Part Names Functions a AUDIO IN Input ports (RCA jack) for the audio signal. b VIDEO IN Input port for the composite video signal. c RS-485 Used to establish RS-485 communications. d VGA OUT Output port for VGA video signal. e D...
Page 13 - remoTe ConTroL; using the numeric buttons
English _13 ! over view remoTe ConTroL SeArCh Displays the search menu. power Displays the Exit pop up screen. numBer [0~+10] Used as the numeric input keys, or displays a single channel. T/w Zooms in or out. BACKup Displays the Backup Menu. mode Changes the screen mode. menu Goes to the system menu...
Page 14 - Changing the remote Control id; The factory default ID of the remote control is 00.
14_ overview overview Changing the remote Control id 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [ id ] button. 3. When ID input ...
Page 15 - ConneCTinG wiTh oTher deviCe; connecting with other device; inSTALLATion; Please take note of the followings before using this product.; CheCKinG The inSTALLATion environmenT
English _15 ! ConneCTinG wiTh oTher deviCe connecting with other device One Year: 24HR X 365 DAY =8,760 HR Temperature Unit: ºC Life (Unit: HOURS) inSTALLATion Please take note of the followings before using this product. • Do not use the product outdoor. • Do not spill water or liquid in the connec...
Page 16 - ConneCTinG The video, Audio And moniTor; By factory default, a USB port is provided for external connection.
16_ connecting with other device connecting with other device ConneCTinG The video, Audio And moniTor ConneCTinG The uSB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB memory or mouse to the USB port. 3. If a USB HDD is connected to the syste...
Page 17 - d e
English _17 ! ConneCTinG wiTh oTher deviCe ConneCTinG The CAmerA (SdC-5340BC) Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime. The camera is suitable for both internal and external use. ` Please make sure not to fully expose the camera to r...
Page 18 - Connecting with dvr; The following figures are based on Model SDR-5100.; installing the camera; Select a position where you want to install the camera.
18_ connecting with other device connecting with other device Connecting with dvr ` The following figures are based on Model SDR-5100. installing the camera The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket. 1. Select a position where you want t...
Page 19 - ConneCTinG The rS-485 deviCe; ] port to the PTZ camera or system keyboard.; ConneCTinG The neTworK; Back Bone; NETWORK
English _19 ! ConneCTinG wiTh oTher deviCe ConneCTinG The rS-485 deviCe Connect the rear [ rS-485 +, – ] port to the PTZ camera or system keyboard. J ` You can connect and control the PTZ camera which supports the RS-485 communication. ` Check if the RS-485 device is compatible with the product firs...
Page 20 - Connecting to the network using the router
20_ connecting with other device connecting with other device Connecting to the network using the router Connecting to network through AdSL CONSOLE AUDIO IN CH1 CH2 VGA OUT DC 12V NETWORK AUDIO IN VIDEO IN VIDEO IN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CH3 CH4 AUDIO OUT + - RS 485 Broadband Router ...
Page 21 - Live; live; GeTTinG STArTed; Starting the system; It takes about 10 seconds to display the start screen after; Shutting down the System; For the permission management, refer to “
English _21 ! Live live GeTTinG STArTed Starting the system 1. Connect the power cable of the DVR to the wall outlet. M ` It takes about 10 seconds to display the start screen after booting. 2. You will see the initialization screen. The initialization process will last about 1 minute. If a new HDD ...
Page 22 - Login; Locking All Buttons; freeZe
22_ live live Login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right figure. 2. Click < Login >. The login dialog appears. You can also see the login dialog to ...
Page 23 - Live SCreen ConfiGurATion; icons on the Live Screen
English _23 ! Live Live SCreen ConfiGurATion icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. Name Description a Current Date, Time Displays the current time and date. b Login Information When you are logged in, the “ LOG ON ” icon will be ...
Page 24 - Name; error information; If the internal HDD is not connected, the “NO HDD”(; Live Screen menu; any area in live mode.
24_ live live Name Description f Camera Name/ Channel Displays the camera name and the changed channel, if any. g Camera Operation Displays the resolution of the recording screen. (Page 53) Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.Displays AUDIO ON/MUTE.Not displayed i...
Page 25 - Split mode menu
English _25 ! Live Split mode menu The context sensitive menu in split mode differs, depending on the login/logout status. Menu Description a Scene Mode Refer to “ Live Mode ”. (Page28) b Audio On/Off Refer to “ Audio On/Off ”. (Page 31) c Freeze Refer to “ Freeze ”. (Page 31) d Stop Alarm Stops the...
Page 26 - Single mode menu; The single mode menu is available only in Single Mode.
26_ live live Single mode menu The single mode menu is available only in Single Mode. The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode. Menu Description a Full Screen Select and click a desired channel in Split mode to switch to the full sc...
Page 27 - view the Launcher menu; The Launcher menu appears on the bottom of the live screen.; c d e
English _27 ! Live view the Launcher menu The Launcher menu appears on the bottom of the live screen. 1. In Live mode, right-click to display the context menu and select < Show Launcher >. 2. Move the cursor to the bottom and click a desired item in the Launcher menu. M ` If no input is entere...
Page 28 - Live mode; Switching the screen mode; mode; Switching the split mode; Auto Sequence; PIP
28_ live live Live mode SDR-5100 display Live images from 16 channels in a total of 8 layout of split screens. Switching the screen mode To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu. Press the [ mode ] button on the r...
Page 29 - manual Switching; > key to move to the next split
English _29 ! Live M ` In Single mode, If you have set < SEQ-Dwell Time > in “ Setting the Device > Camera ”, Auto Sequence will be conducted at the set interval. (Page 45) ` In a split mode, If you have set < Multi CH SEQ Time > in “ Setting the Device > Monitor ”, Auto Sequence w...
Page 30 - Channel Setting; Ex : if switching CH 1 to CH 7; Switching to Single mode; remote Control
30_ live live Channel Setting You can display the channel in a desired area of a split screen. 1. Place the cursor over the camera name of each channel to display the < % > key to the right on the screen. 2. Click a camera name to display a channel list where you can select a different channel...
Page 31 - Zoom; In the enlarged image, use the direction buttons (; Audio on/off in Single mode; Only the channel where <; The playback of the image is stopped temporarily.; This will release the freeze.
English _31 ! Live Zoom This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select < Zoom in > in the right-click menu. Press the [ Zoom ] button on the remote control, or simply click < > in the launcher men...
Page 32 - evenT moniTorinG; In “
32_ live live evenT moniTorinG This will display the channel in sync with a specific event (Motion/Video Loss) if it occurs. In “ monitor > event display ”, set the event monitoring to ON/OFF and specify the event display time. (Page 50) • If multiple events occur simultaneously, the screen will ...
Page 33 - SYSTem SeTuP; Using the mouse may help make setup easier.; menu; main menu
English _33 ! main menu You can setup the system properties, devices, and options for recording, event, backup and network. SYSTem SeTuP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properti...
Page 34 - GMT (Greenwich Mean Time) is standard World Time and the basis
34_ main menu main menu • Date : Sets the date that will appear on the screen. You can select the date format. • Time : Sets the time and its format that will appear on the screen. Select either one from < 24 Hours, 12 Hours (am/Pm) >. • Time Zone : Sets the time zone of your area based on the...
Page 35 - > only to make every; using the Calendar
English _35 ! main menu Setting Holiday You can set specific dates to Holidays according to your preferences. Holidays are applied to < Recording Schedule > and < alarm Schedule > too. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Date/Time/Languag...
Page 36 - Permission management; Setting the administrator; By default, initial ID and password are set to “; using Virtual Keyboard; Caps Lock
36_ main menu main menu Permission management You can set permissions of each user over the DVR's specific function and settings. Setting the administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help...
Page 37 - Setting the Group; For entering a group name, refer to “; To set the group authority; SDR-4100 shows a list of 8 channels in Channel Setup window.
English _37 ! main menu Setting the Group You can create user groups and setup permissions for those user groups. You can register a user for each group in < user >. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < System > window to move to < Permiss...
Page 38 - To restrict the user permissions; To change the user password; user menu
38_ main menu main menu To restrict the user permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user’s own password only. 1. Start the DVR. If all permissions are restricted, only the Lo...
Page 39 - Setting the user; Refer to “
English _39 ! main menu Setting the user Users can be added only if a group was created in < Group > menu. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < System > window to move to < Permission management >, and press [ enTeR ] button. 2. Select ...
Page 40 - Setting Permissions
40_ main menu main menu Setting Permissions You can set restricted access for all general users. Items with restrictions will require logging in for use.Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < System > window to move to < Permission management >...
Page 41 - System management; Checking the System information
English _41 ! main menu System management You can check the system version, update to a newer version, as well as data backup and initialization. Checking the System information You can check the current system version, broadcasting system, MAC address. You can update the system. Using the mouse may...
Page 43 - Include Network Settings; Log information
English _43 ! main menu Settings You can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < System > window to move to < System management >, and press [ enTeR ] button. 2. Select < Settings >...
Page 44 - event Log
44_ main menu main menu event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < System > window to move to < Log information >, and p...
Page 45 - SeTTinG THe DeViCe; Setting the Camera
English _45 ! main menu SeTTinG THe DeViCe You can configure the settings of: Camera, Storage Device, Remote Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. 1. Press the [ menu ] button on th...
Page 46 - > to initialize settings back to the default 50.; To set the privacy region; Apply to All CH
46_ main menu main menu • Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences. Select a channel and adjust the < (Brightness) >, < (Contrast) >, and < (Color) > of the selected channel. ` Press th...
Page 47 - Setting the PTZ; Confirming Devices
English _47 ! main menu Setting the PTZ To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the “ Remote Devices ” settings. (Page 49) Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Device > ...
Page 48 - Formatting; Even when formatted, used HDD space will not be 0 GB due
48_ main menu main menu Formatting You can format a storage device. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Device > window to move to < Storage Device >, and press [ enTeR ] button. 2. Select < Format >. A window for selection of device f...
Page 49 - HDD alarm; Check; Remote Devices; For changing the remote control’s ID, refer to “
English _49 ! main menu HDD alarm You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Device > window to move to < Storage Device >, and...
Page 50 - monitor; Setting the monitor
50_ main menu main menu monitor You can configure information to be displayed. Setting the monitor Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Device > window to move to < monitor >, and press [ enTeR ] button. 2. Select < monitor >. 3. Use di...
Page 51 - SeTTinG THe ReCORDinG; Recording Schedule; Event recording and scheduled recording starts about 3
English _51 ! main menu SeTTinG THe ReCORDinG You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specified time. Using the mouse may help make setup easier. 1. Press the [ m...
Page 52 - Recording Color Tags; event Record Duration
52_ main menu main menu Recording Color Tags Color Function Description White No Recording No schedule / event recording Orange Continuous Scheduled recording only Blue Event Event recording only Green Both(Cont&Evnt) Both scheduled / event recordings Each press of a selected cell will cycle thr...
Page 53 - ReC Quality & Resolution; Setting Standard Recording Properties; for the same channel on any other page.
English _53 ! main menu ReC Quality & Resolution You can set resolution, FPS and quality of recordings by channel, and by recording type of standard / event. Setting Standard Recording Properties You can set each channel’s resolution, quality and fps for normal recordings. Using the mouse may he...
Page 54 - This option will be enabled only if Disk End Mode is set to <
54_ main menu main menu Record Option You can set the recording to stop or overwrite when the HDD is full. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < Record > window to move to < Record Option >, and press [ enTeR ] button. 2. Use direction buttons...
Page 55 - SeTTinG THe eVenT; motion Detection; For further information on alarm output, refer to “; Setting the motion Detection area
English _55 ! main menu SeTTinG THe eVenT You can set recording options for motion, and video loss event. motion Detection You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area. Using the mouse m...
Page 56 - alarm Schedule
56_ main menu main menu Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < event > window to move to < Video Loss Detection >, and press [ enTe...
Page 57 - BaCKuP; Setting the Backup
English _57 ! main menu BaCKuP You can check the backup device and set the backup schedule by channel or by time. The product only supports external HDD of USB memory and USB type. (Page 112) Setting the Backup You can backup the desired data to a connected device. Using the mouse may help make setu...
Page 58 - If no available device is recognized for backup, <; neTWORK COnFiGuRaTiOn; Connection mode; Setting the Connection
58_ main menu main menu 5. When the backup setup is done, press < OK >. ` If no available device is recognized for backup, < OK > button is not activated. J ` The application may slow down during the backup. ` You can switch to the menu screen during the backup in operation, but playback...
Page 59 - Setting the Protocol; Multicast are activated.
English _59 ! main menu • IP, Gateway, Subnet Mask, and DNS - For < Static iP > : You can directly input IP address, Gateway, Subnet Mask and DNS. - For < Dynamic iP > : IP address, Gateway, and Subnet Mask are set automatically. - For < aDSL > : IP address, Gateway, and Subnet Mas...
Page 60 - notification; network Overview; Internet
60_ main menu main menu notification J ` In a multi-browser environment, the web port should be set to 80 (private port). Select one between 4505 and 4530 for RTSP • network Overview 1 6 2 7 3 8 4 9 ! REC MENU POWER HDD ALARM + / SEARCH @ MODE PREV NEXT ALARM 5 0/10+ 1 6 2 7 3 8 4 9 ! REC MENU POWER...
Page 61 - Port Forwarding is 80; nd Set Port Forwarding Setting; Port Forwarding is 81
English _61 ! main menu • 1st Set Port Forwarding Setting Port Forwarding is 4520~4524 (4520, 4521, 4522, 4523, 4524) SDR-5100192. 168. 1. 200TCP45204520 Port Forwarding is 80 SDR-5100192. 168. 1. 200TCP8080 • 2nd Set Port Forwarding Setting Port Forwarding is 4525~4529 (4525, 4526, 4527, 4528, 4529...
Page 62 - Connecting and Setting the network; When no router is used; environments allows connection between the DVR and
62_ main menu main menu Connecting and Setting the network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static iP mode - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection ...
Page 63 - When a router is used; enter “
English _63 ! main menu When a router is used J ` To avoid IP address conflict with the DVR's static IP, check followings : • Setting the DVR with a static iP - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LA...
Page 64 - in case of Port Forwarding Setting; download
64_ main menu main menu • Setting Router’s Port Forwarding 1. Set the protocol to < TCP >. 2. External Port Range : Enter the TCP Port set in the < Port(TCP) > in < Protocol > menu of the connected DVR. If more than one DVRs are connected to the router, the TCP port can be differen...
Page 66 - DDnS
66_ main menu main menu 5. After checking if the list is right, click < (5)Do it now > for updating your router. DDnS You can set the DDNS site for a remote user’s network connection. Using the mouse may help make setup easier. 1. Use the up/down buttons ( $% ) in < network > window to m...
Page 67 - DDnS Setting; DDNS is a short form of Dynamic Domain Naming System.; iPOLiS DDnS Setting; LOGin
English _67 ! main menu DDnS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.com) to an IP address consisting of numbers (64.233.189.104). DDNS (Dynamic DNS) is a ser...
Page 68 - Live Transfer
68_ main menu main menu 4. After registration, you can see the list as below. 5. Select < iPOLiS > and fill Server Name out with your registration information. 6. You can see < STaTuS > changed to < On > in 10 minutes, if all the network settings are right. Live Transfer Sets the q...
Page 69 - mailing Service; If an event occurs with a channel where the camera’s video is set to <; SmTP Setting
English _69 ! main menu mailing Service You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs. M ` If an event occurs with a channel where the camera’s video is set to < OFF > or the remaining recording count is set to < OFF >, only the text n...
Page 70 - event Setting; If a series of events occurs, the e-mail will be sent at the specified; Group Setting
70_ main menu main menu event Setting You can set the interval and type of the event that will be sent to the user. Using the mouse may help make setup easier. 1. In the < network > setting window, press the up/down ( $% ) button to move to < mailing Service > and press the [ enTeR ] but...
Page 71 - Recipient Setting; Use direction buttons (
English _71 ! main menu Recipient Setting You can add/remove a recipient(s) to/from the specified group and edit the group if necessary. Using the mouse may help make setup easier. 1. In the < network > setting window, press the up/down ( $% ) button to move to < mailing Service > and pr...
Page 72 - COnTROLLinG a PTZ DeViCe; PTZ Device; Getting started with PTZ; The PTZ camera is available, only if a channel is selected, in; PTZ Control
72_ main menu main menu COnTROLLinG a PTZ DeViCe The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected. Getting started with PTZ The PTZ came...
Page 73 - using the PTZ camera
English _73 ! main menu using the PTZ camera You can use one camera to perform all functions of PAN, TILT and ZOOM for monitoring multiple places and set the preset to your preference in a desired mode. 1. Launch the < PTZ Control > menu. As the PTZ < > icon on the bottom right corner tu...
Page 74 - Preset Setting; Save; Camera Setting; SAMSUNG PROTOCOL
74_ main menu main menu Preset Setting A preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored. 1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction. 2. Select the < Save > key. The virtual keyboard ...
Page 75 - SeaRCH; Overlapped data : It only appears if there exists overlapped
English _75 ! SeaRCH & PLa Y SeaRCH You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the < Search > menu directly in Live mode. 1. In Live mode, right-click any area of the screen. The Live menu appears. 2. Select < Sear...
Page 76 - event Search; Schedule recording included)
76_ search & play search & play • Zoom In : The map enlarges in detail. It will switch in the sequence of 24 hours - 16 hours - 8 hours - 4 hours. • Zoom Out : The map will switch in the reverse order of the detailed mode above. It will switch in the sequence of 4 hours - 8 hours - 16 hours ...
Page 77 - motion Search; You can use the mouse to select the related items.; If you set the motion area to <
English _77 ! SeaRCH & PLa Y Backup Search Searches for backup data in the connected backup device. Only data in the format of DVR is included in the search. Refer to < Type > in “ Backup > Setting the Backup ”. (Page 57) Using the mouse may help make setup easier. 1. Select < Backup...
Page 78 - PLaYBaCK; Play
78_ search & play search & play PLaYBaCK Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help make setup easier. 1. In Live mode, click < Play > in the right-click menu or < > in the launcher menu, or press the Play button on...
Page 79 - using the Playback Button; b c
English _79 ! SeaRCH & PLa Y using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. b Skip Backward Moves backward by unit time. c Backward Fast Play Used for quick backward playback. Backward Slow Play Used for backward frame-...
Page 80 - Web Viewer; IntroducIng Web VIeWer; Web Viewer allows remote access to your DVRs. You have; Product Features; Remote access from a standard browser; System requirements; Windows XP Professional
80_ Web Viewer Web Viewer IntroducIng Web VIeWer What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video etc. Product Features • Remote access from a standard browser • Supports 1, 4, 9, 16 camera viewing formats (maximum of 16 cameras in the l...
Page 85 - Web VIeWer; oSd Information display
! Web VIeWer oSd Information display a The channel number, video size, and IP address of the connected DVR are displayed. b This icon will appear if the audio signal is currently being output. c The current date and time will be displayed according to the selected time information display setting &l...
Page 86 - connected dVr; No Response; Setting the display of the oSd time information; SEQUENCE
86_ Web Viewer Web Viewer connected dVr This displays the IP address and the status of the connecting DVR. M ` Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded. ` The number of simultaneous connection...
Page 87 - Saving the live Screen on the Pc; cAPture
! Web VIeWer • next : When this button is clicked, the next screen appears. In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16. In QUAD MODE, the screens are changed like 1st 4 channels (1~4) 2nd 4 channels (5~8) 3rd 4 channels (9~12) 4th 4 channels (13~16). In NINE MOD...
Page 88 - record; changing the live Screen channel
88_ Web Viewer Web Viewer • record : Saves the current image on the screen and saves it as a avi video file. M ` To record it, it is required at least 1GB of available space. ` The default saving path is “C:\Program Files\Samsung\DVR Web Viewer\VideoClip\Live”. To change the saving path, click < ...
Page 90 - uSIng SeArch VIeWer; lIVe
90_ Web Viewer Web Viewer uSIng SeArch VIeWer The Search Viewer screen consists of following : a This displays the IP address and the model name of the connected DVR. b These menus consist of < lIVe >, < SeArch >, < SetuP >, < About >. c These buttons are used for the screen ...
Page 91 - This displays the IP address and the status of the connecting DVR.
! Web VIeWer Split-Screen You can change the split mode by clicking each number icon. • Click < > button. The screen displays the selected camera connected to the DVR in “ SIngle Mode ”. • Click < > button. The screen displays the selected camera connected to the DVR in “ QuAd Mode ”. M ...
Page 93 - Searching the recorded Video In the calendar; today; check duplicates
! Web VIeWer Searching the recorded Video In the calendar If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click < today >, it will be synchronized with the system ti...
Page 94 - controlling Playback; output from the DVR set.; VIeWer SetuP
94_ Web Viewer Web Viewer controlling Playback a Fast backward : Reverse-plays faster(2x~64x). b reverse Play : Performs Reverse Play. c Play : Performs playback. d Fast Forward : Plays faster(2x~64x). e go to First : Moves the beginning time of recorded video in the time line. f Step backward : Per...
Page 95 - holiday; You can set specific dates to Holidays according to your; You can change the admin ID or the password.
! Web VIeWer • time Synchronization Setup Set the time synchronization. • display Date Format : Set the date type.Time : Select a time format to display on the screen. • dSt (daylight Saving time) DST is displayed an hour ahead of the standard time of the time zone. • language Select a preferred lan...
Page 97 - device; camera
! Web VIeWer device You can check a list of devices that are connected to the DVR and configure the necessary settings. Click < device > in the menu screen. For more information, refer to “ Setting the device ”. (Page 45) camera • camera You can configure the settings of the camera that is con...
Page 98 - Storage device; You can check and change the settings of the storage device.; remote device
98_ Web Viewer Web Viewer Storage device You can check and change the settings of the storage device. • device You will see a list of storage devices that are connected to the DVR. You can check the type, used/total, usage and status of the device. • hdd Alarm You can set the alarm output channel an...
Page 100 - For more information, refer to “; recording Schedule; If you set a recording schedule for a specific date and time,; event record duration; You can set the start and end times of recording that will be
100_ Web Viewer Web Viewer record For more information, refer to “ Setting the recording ”. (Page 51) recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. - Apply to All CH : Click < Apply to All ch > to display the co...
Page 101 - rec Quality & resolution; event; Setting the event; Motion detection; Motion region
! Web VIeWer rec Quality & resolution • Standard/event You can set the resolution, frame rate and recording quality for each channel. record option You can set the Disk End Mode. event For more information, refer to “ Setting the event ”. (Page 55) Motion detection You can set the motion detecti...
Page 102 - Video loss detection; You can set the alarm output time if a video loss occurs.; You can schedule the alarm output according to the day of
102_ Web Viewer Web Viewer Video loss detection You can set the alarm output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs.
Page 103 - network; connection; ddnS; You can check the DDNS settings.
! Web VIeWer network For more information, refer to “ network configuration ”. (Page 58) connection A remote user can access the DVR via the network to check the current mode and the IP address. • connection You can set the network connection route. • Protocol You can configure the protocol related ...
Page 104 - live transfer; SMtP
104_ Web Viewer Web Viewer live transfer A remote user can set the images of the DVR. • live transfer A remote user can set the image resolution of the transferred data. Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. • SMtP...
Page 105 - About
! Web VIeWer • group You can add a group to receive the mail if an event occurs and set the permission to receive the event mail for each group. • recipient You can add a user or users who will receive the mail. About Click < About >. Displays the model name of connected DVR and the version of...
Page 106 - MobIle VIeWer; What is Mobile Viewer?; Download the Samsung iPOLiS mobile app.
106_ Web Viewer Web Viewer MobIle VIeWer What is Mobile Viewer? iPOLIS mobile is smartphone application that enables you to connect to DVR (Digital Video Recorder) remotely and control the video playback and PTZ operations (if configured) in real time. using a Smartphone 1. Download the Samsung iPOL...
Page 107 - Key Features
! Web V Ie W er 4. Register the DVR to the iPOLiS mobile. J Name : Create a name for the DVR you are adding Model : Select the DVR model Host : If you are using Samsung iPolis DDNS, enter the host DDNS Host Address you wrote down earlier. It should be www.samsungipolis.com/Product ID HTTP Port : If ...
Page 108 - backup viewer; Sec bAcKuP VIeWer; recommended System requirements; VGA : Geforce 6200 or higher; backup viewer
108_ backup viewer backup viewer Sec bAcKuP VIeWer You can play a file that is backed up in the format of SEC.Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer.If you run the backup file viewer, the backup data file will be automatically...
Page 111 - appendix
! APPendIx appendix Product SPecIFIcAtIon (cAMerA) ❖ Sdc-5340bc Item Details SDC-5340BCN SDC-5340BCP Electrical Input Voltage DC 12V Power Consumption 3W Video Imaging Device 1/3'' CMOS Total Pixels 720 x 480 Scanning System Interlace Synchronization Internal Frequency H: 15,734 Hz, V: 59.94 Hz H: 1...
Page 112 - Item
112_ appendix appendix Product SPecification(dvr) ❖ Sdr-4100 Item Details SDR-4100 Video Inputs 8 composite video 0.5-1 Vpp, 75 ohm Resolution 704x480 NTSC, 704x576 PAL Live Frame rate 240fps NTSC, 200fps PAL Resolution 704x480 NTSC, 704x576 PAL Multi Screen display 1, 4, 6, 8, 9, PIP, Sequence Perf...
Page 118 - deFAult SettIng; Use System/Load Factory Default in MENU
118_ appendix appendix deFAult SettIng This returns the factory default settings.The settings are made as follows; • Use System/Load Factory Default in MENU ` The default settings are based on SDR-5100. ` The default password can be exposed to a hacking thread so it is recommended to change the pass...
Page 120 - Category
120_ appendix appendix Category Details Factory Default Network Connection Mode Connection Connection Mode Static IP Bandwidth 2Mbps IP 192.168.1.200 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 DNS 168.126.63.1 Protocol Protocol Type TCP Port (TCP) 4520~4524 Webviewer Port 80 DDNS DDNS Site OFF Li...
Page 121 - troubleShootIng
! APPendIx troubleShootIng Symptom Countermeasures The system does not turn on and the indicator on the front panel does not work at all. y Check if the power supply system is properly connected. y Check the system for the input voltage from the power source. y If the problem persists even after you...
Page 122 - Symptom
122_ appendix appendix Symptom Countermeasures A message of “Need to reset date/time.” Is displayed on the screen. y This message is displayed if there occurs a problem with the time setting of the internal clock or an error in the clock itself. Contact the retailer or the service center for more in...
Page 124 - oPen Source lIcenSe rePort on the Product
gnu generAl PublIc lIcenSe Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The lice...
Page 129 - gnu leSSer generAl PublIc lIcenSe
16. limitation of liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAG...
Page 135 - SALES NETWORK; SAMSUNG TECHWIN AMERICA Inc.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213...