Samsung SCC-B5369P - Manual

Page 2 - – DIGITAL COLOR DOME CAMERA; WARNING; Safety information

2 – DIGITAL COLOR DOME CAMERA CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of ...

Page 4 - Caution

4 – DIGITAL COLOR DOME CAMERA FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause und...

Page 5 - Important Safety Instructions

English – 5 ENG n. Important Safety Instructions WARNING Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s...

Page 6 - Contents; Introduction

6 – DIGITAL COLOR DOME CAMERA Contents Introduction Features 7 Product & Accessories 8 Part Names and Functions 9 Installation Before installation 12 Installation procedure 12 Adjusting the camera direction 14 How to use OSD Menu Using Icons in the Menu 15 Main Menu 15 Proﬁ le 16 Camera Setup 18...

Page 7 - FEATURES

English – 7 ENG Introduction FEATURES High Resolution This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. VPS(Virtual Progressive Scan) This is an advanced technology that reproduces a sharp progressive image. Th...

Page 8 - PRODUCT & ACCESSORIES

8 – DIGITAL COLOR DOME CAMERA Introduction Output Signal Setting You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy, Horizontal/Vertical proﬁ ling, and digital zooming. OSD(On Screen Display) Menu OSD menu is provided to display the status of cam...

Page 9 - PART NAMES AND FUNCTIONS

English – 9 ENG Introduction g. PART NAMES AND FUNCTIONS Components of your camera ❖ EX T.D /N GND 렌즈 전원 커넥터 비디오 커넥터 테스트 모니터 출력 Lens Test monitor output Video connector a Power connector

Page 11 - ef

English – 11 ENG Introduction SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value. cd...

Page 12 - Installation; BEFORE INSTALLATION

12 – DIGITAL COLOR DOME CAMERA Installation BEFORE INSTALLATION Before installing your camera, you have to read the following cautions. You have to check whether the location (ceiling or wall) can bear ﬁ ve times the weight of your camera. Don’t let the cable to be caught in improper place or the el...

Page 14 - ADJUSTING THE CAMERA DIRECTION

14 – DIGITAL COLOR DOME CAMERA Installation ADJUSTING THE CAMERA DIRECTION When the camera is ﬁ xed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting). In case of pa...

Page 15 - USING ICONS IN THE MENU; How to use OSD Menu

English – 15 ENG a ee he USING ICONS IN THE MENU (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. (RET) Returns to the previous menu. (HOME) Returns to the main menu. (SAVE) Used to save your settings of MASK AREA, PRIVACY...

Page 18 - CAMERA SETUP; cdef

18 – DIGITAL COLOR DOME CAMERA How to use OSD Menu CAMERA SETUP e CAMERA SET f CAMERA ID OFF VPS OFFIRIS ALC MOTION (F.FAST)---DNR MIDSHUTTER OFFSENS-UP AUTO X4 FLICKERLESS OFFXDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFFDETAIL [2]V-SYNC (INT)---AGC COLOR SUP LOWREVERSE H/VPOSI/NEGA +PIP OFF...

Page 28 - PRIVACY ZONE SETUP

28 – DIGITAL COLOR DOME CAMERA How to use OSD Menu MASK AREA [1~4] Specify a detection exception area to mask. Select a mask number and specify the size and position. MASK AREA <SIZE> <LOCATION> DISPLAY [ON, OFF] With the DISPLAY option set to ON , a motion or a set ADVANCED function...

Page 30 - OTHER SET; SYSTEM INFORMATION

30 – DIGITAL COLOR DOME CAMERA How to use OSD Menu OTHER SET e OTHER SET f FACTORY DEFAULTS OSD COLOR BW FACTORY DEFAULTS All the settings will be restored to the factory default.However, the settings of PROTOCOL , BAUD RATE , ADDRESS and LANGUAGE will not be restored to the default. OSD COLOR [BW, ...

Page 31 - Camera Confi guration

English – 31 ENG How to use OSD Menu Initial Conﬁ guration Table Camera Conﬁ guration • CAMERA ID OFF VPS OFF IRIS ALC AGC VERY HIGH MOTION (F.FAST) DNR MID SHUTTER OFF SENS-UP AUTO x4 FLICKERLESS (OFF) XDR MID DAY/NIGHT AUTO DIGITAL ZOOM OFF DETAIL [2] AGC COLOR SUP MID REVERSE H/V POSI/NEGA + PIP ...

Page 32 - Specifi cations; SPECIFICATIONS; Items

32 – DIGITAL COLOR DOME CAMERA Speciﬁ cations SPECIFICATIONS Items Sub-items SCC-B5367N/SCC-B5367SN/SCC-B5369N/SCC-B5369SN Camera Type CCTV Camera (WDR & DAY/NIGHT) Image Device 1/3” Super-HAD PS CCD Pixels Total 811 x 508 Effective 768 x 494 Scanning System Interlace/Progressive Scanning Line 5...