Page 2 - Use this camera in the following order.; Set up the camera driver; Thank you for buying a Samsung Digital Camera.
《 1 》 Instructions Getting to know your camera ■ Use this camera in the following order. Set up the camera driver Take a picture Insert the USB cable Check [Removable Disk] Before connecting the camera to a PC, viathe USB cable, you will need to set up thecamera driver. Install the camera driverthat...
Page 3 - There is the possibility of injury from the camera’s moving parts.
《 2 》 Danger Warning WARNING indicates a potentially hazardous situation which, if not avoided, couldresult in death or serious injury. ■ Do not use the flash in close proximity to people or animals. Positioning the flashtoo close to your subject’s eyes may cause eyesight damage. ■ For safety reason...
Page 4 - READY; How to use the PROGRAM mode; RECORDING
Caution Contents 《 3 》 CAUTION indicates a potentially hazardous situation which, if not avoided, mayresult in a minor or moderate injury. ■ Leaking, overheating, or damaged battery could result in fire or injury. • Use battery with the correct specification for the camera. • Do not short circuit, h...
Page 5 - Contents; Before contacting a service centre; SOFTWARE
《 4 》 Contents ● How to use the menu …………… 31 ● Recording ………………………… 31 ■ Sharpness ……………………… 31 ■ Contrast ………………………… 31 ■ Auto Focus type ………………… 32 ■ OSD (On Screen Display)information ……………………… 32 ● Sound …………………………… 33 ■ Volume …………………………… 33 ■ Start up sound …………………… 33 ■ Shutter sound …………………...
Page 6 - System chart
《 5 》 System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact yournearest Samsung dealer or Samsung service centre. Software CD (see p.86) Camera strap User manual, Product war...
Page 7 - Identification of features
《 6 》 Identification of features Front & Top Shutter button Lens / Lens cover Mode dial Power button Self-timer lamp / Auto focus lamp Microphone Flash Speaker DC input connection port USB / AV connection terminal
Page 10 - Important information about battery usage; INFORMATION; VOICE RECORDING
Connecting to a Power Source 《 9 》 Identification of features ■ We recommend using battery supplied with the camera. The available batteriesare listed below. - Non rechargeable batteries : 2 X AA Alkaline (High Capacity)- Rechargeable batteries : SNB-2512 (Ni-MH) ■ SNB-2512 specification(optional) ■...
Page 11 - Low battery
Inserting the memory card ■ Insert the battery as shown - If the camera does not turn on after you have inserted battery, please checkwhether the battery is inserted with thecorrect polarity (+ / -). - When the battery chamber cover is opened, do not press the batterychamber cover by force. This may...
Page 12 - Instructions on how to use the memory card; Samsung cannot be held responsible for lost data.
Instructions on how to use the memory card 《 11 》 ● Do not use a memory card formatted by another digital camera or memory cardreader. ● If the memory card is subjected to any of the following, the recorded data maybecome corrupted : - When the memory card is used incorrectly.- If the power is switc...
Page 13 - Recorded image size Super Fine
《 12 》 ■ When using a 256MB MMC (Multi Media Card), the specified shooting capacitywill be as follows. These figures are approximate as image capacities can beaffected by variables such as subject matter and memory card type. * The recording times can be changed by the zoom operation. The zoom butto...
Page 14 - When Using the Camera for the First Time; Setting up the date, time and date type
《 13 》 When Using the Camera for the First Time ■ Charge the rechargeable battery fully before using the camera for the first time. ■ When the camera is turned on for the first time, a menu will be displayed to setdate / time, language and battery type in the LCD monitor. This menu will not bedispla...
Page 15 - LCD monitor indicator; Aperture Value/ Shutter Speed
《 14 》 LCD monitor indicator [ Image & Full Status ] ■ The LCD monitor displays information about the shooting functions andselections. No. Description Icons Page 2 Aperture Value/ Shutter Speed F2.8, 1/30 p.15/16 3 Face Recognition p.18 4 Flash p.27 5 Self-timer p.28 Recording mode p.9 1 No. De...
Page 16 - Starting the recording mode
《 15 》 Starting the recording mode ■ How to use the PROGRAM mode ( ) Selecting the automatic mode will configure thecamera with optimal settings. You can still manuallyconfigure all functions except the aperture valueand shutter speed. 1. Select the PROGRAM mode by rotating the mode dial. 2. Press t...
Page 18 - Wise Shot; How to use the SCENE mode ( )
《 17 》 Starting the recording mode ■ Wise Shot 2 images are taken at a time. One is taken in theFill-In Flash mode and the other is taken in theASR mode. ● How to use the Wise Shot 1. Select the ASR mode by rotating the mode dial and press the +/- button.2. Select Drive menu tab by pressing the Up a...
Page 19 - Press the shutter button fully to take a picture.
《 18 》 Starting the recording mode 3. Press the shutter button halfway. The focus frame turns to green when the focus is activated. 4. Press the shutter button fully to take a picture. 2. The size and position of the auto focus frame is set at the face of the subject automatically. ■ Face recognitio...
Page 22 - Used for turning the camera’s power on / off.
《 21 》 Things to Watch Out for When Taking Pictures ■ Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast.- If the subject is highly reflective or shiny.- If the subject is moving at high speed.- When there is strong ref...
Page 24 - The digital zoom cannot be used in movie clip shots.; Recording a voice memo
《 23 》 ZOOM W / T button ● Images taken using the digital zoom may take a little longer for the camerato process. Allow time for this to take place. ● The digital zoom cannot be used in movie clip shots. ● If the Zoom buttons are being pressed during the Movie clip shots, the voicewill not recorded....
Page 26 - Focus lock
《 25 》 ■ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞ : Infinity focus range) Macro ( ) / Down button O O O O O O O X O O O O X O O X X X X O X O O O O O O X X O O O O X X - - - - - - Mode Normal Macro Auto Macro Super Macro Manual focus Normal Macro Auto Macro ...
Page 30 - Using the LCD monitor to set the camera settings; Camera working mode
《 29 》 Using the LCD monitor to set the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. In anymode with the exception of VOICE RECORDING mode, pressing the MENUbutton displays the menu on the LCD monitor. ※ The menu will not be displayed on the LCD monitor in...
Page 31 - Menu tab
《 30 》 ※ The menus are subject to change without prior notice for upgrading the camerafunctions. Menu tab Main menu Sub menu Page Off 0.5sec 1sec 3sec Off 1min 3min 5min 10min - LCD Save Off On p.36 Video Out NTSC PAL p.37 Format No Yes p.37 Reset No Yes p.38 Battery Type Alkaline Ni-MH p.38 Quick V...
Page 32 - How to use the menu; Use the LEFT and RIGHT buttons to navigate through the menus.
《 31 》 How to use the menu 3. Use the UP and DOWN buttons to select a sub menu. 4. Select a sub menu, and then the value you set will be saved. Press the MENU button and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is n...
Page 33 - focused
《 32 》 [ OSD (On Screen Display) information ] ■ In any mode with the exception of VOICERECORDING mode, you can check the recordingstatus in the LCD monitor. [ Full information ] [ Basic information ] Recording ( ) [ PROGRAM mode ] Sharpness RECORDING Contrast Auto Focus OSD Info Full Basic Back Set...
Page 34 - You can select the shutter sound.
《 33 》 Sound ( ) [ Volume ] ■ You can set select a volume of sound, start upsound, shutter sound, warning sound and AF sound. ● [Volume] sub menu: [Off], [Low], [Medium], [High] [ Start up sound ] ■ You can select the sound that is activatedwhenever the camera is turned on. ● Start up sound : [Off],...
Page 35 - Assigning File Names
《 34 》 [ Language ] ■ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will bepreserved. - LANGUAGE sub menu : English, Korean, French, German, Spanish,Italian, S.Chinese, T.Chinese, Japanese,Russian, Por...
Page 37 - Sub menus
《 36 》 ● [LCD save] sub menu [Off]: The LCD monitor will not be turned off. [On]: If you select the [LCD Save] and the camera isn't operated during the specified time(about30 SEC.), the camera power will be idle(LCDmonitor : OFF, Camera status lamp :Blinking) automatically. To use the cameraagain, p...
Page 38 - Connecting to an external monitor
《 37 》 [ Selecting Video out type ] ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV,etc.) to which the camera is connected. PAL mode can support only BDGHI. Yellow - Video White - sound ■ Connecting to an exter...
Page 39 - Movie clip mode : You can select the colour menu.
《 38 》 ● This button will not operate in ASR, Voice recording mode and some scenemodes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow). ● If a menu among the colour, image editing and Fun menu, any previouslyselected effect is cancelled automatically. ● Even if the camera is turned ...
Page 40 - Press the shutter button to capture an image.
《 39 》 Special Effect (E button) : Colour 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. : No effect is added to the image: Captured images will be stored in black and white.: Captured images will be stored in a sepia tone (a gradient of yellowish brown colours...
Page 41 - Saturation; You can change the saturation of the image.
《 40 》 Saturation Special Effect (E button) : Image editing Bar for changing the saturation IMAGE ADJUST Move Exit E 채도 이동 해제 E E Saturation Move Set OK Saturation Move Set OK [Final Image] ■ You can change the saturation of the image. ● Press the E button in an available mode ( , , , , , , , ). + d...
Page 42 - button to move the focus frame position.; Preset focus frames
《 41 》 Special Effect (E button) : FUN ● Moving and changing the focus frameYou can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the + / - button.3. The colour of focus frame turns white. Press t...
Page 43 - You can combine 2 - 4 different shots in a still image.; Composite shooting; Selecting 2 composite shooting
《 42 》 Special Effect (E button) : FUN Select a desired menu by pressing the Left / Right button and press the OKbutton. ■ You can combine 2 - 4 different shots in a still image. ● Press the E button in an available mode ( , , , , , , , ). ● You can use the flash button, self-timer button, macro but...
Page 45 - Photo Frame
《 44 》 ■ You can add 9 types of frame-like borders to a still image you want to capture. ■ Date & Time information will not be printed on the stored image taken with PhotoFrame menu. ● Press the E button in an available camera modes ( , , , , , , , ). Photo Frame Special Effect (E button) : FUN ...
Page 47 - Size; Movie clip
《 46 》 Size ■ You can select the image size appropriate for your application. ● The higher the resolution, the lower the number of shots available becausehigh resolution images require more memory. INFORMATION [ STILL IMAGE mode ] [ MOVIE CLIP mode ] 6 3648X2736 SIZE 00:00:10 800X592 SIZE [ STILL IM...
Page 48 - Continuous shot; : Images will be taken; Metering
《 47 》 Continuous shot - [Single] : Take one picture only. - [Wise Shot] : 2 images are taken at a time. One is taken in the Fill-In Flashmode and the other is taken inthe ASR mode. - [Continuous] : Images will be taken continuously until the shutterbutton is released. The shootingcapacity depends o...
Page 49 - White balance
《 48 》 ISO - AUTO : The camera's sensitivity is automatically changed by variables such as lighting value orsubject brightness. - 80, 100, 200, 400, 800, 1600 : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity. However,the image may be s...
Page 50 - Compensating Exposure; Using the Custom White Balance
《 49 》 White balance Exposure compensation ■ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the + / - button. ● Compensating Exposure 1. Press the + / - button, and then use the UP a...
Page 52 - Starting play mode
《 51 》 Starting play mode ● Playing back a movie clip Steps from 1-2 are the same as those to play backa still image.3. Select the recorded movie clip and press the Play & Pause button to play back. - To pause a movie clip file while playing it back, press the play & pause button again. - Pr...
Page 53 - LCD monitor Indicator; Playing back a recorded voice
《 52 》 LCD monitor Indicator ■ When you select [Full] menu of [OSD information] menu, the LCD monitordisplays shooting information about the displayed image. ● Playing back a recorded voice Steps from 1-2 are the same as those to play backa still image.3. Select the recorded voice file and press the...
Page 54 - Using the camera buttons to set the camera
《 53 》 [ Thumbnail display mode ] ■ In Play mode, you can use the buttons on the camera to conveniently set up thePlay mode functions. ● You can view multiple pictures, enlarge a selected picture, and crop and save aselected area of an image. ● Thumbnail display 1. While an image is displayed on ful...
Page 64 - Composite image
《 63 》 Special Effect (E button) : FUN ● Moving and changing the focus frameYou can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left / Right button and press the OK button. 2. Move the location of the frame by pressing the 5 function button. 3. Press ...
Page 67 - The size of sticker added image is fixed to 1M.
《 66 》 Special Effect (E button) : FUN Sticker ● You can add various stickers on the image. Select ( ) Select a desired sticker by pressing the Left / Right button and press the OK button Pressing the +/- button Adding a sticker Select the location of sticker by pressing the 5 function button Pressi...
Page 69 - Deleting Images in Thumbnail Display Mode
《 68 》 ● Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. A message will display on the LCD monitor as shown below.3. Select the sub menu values by pressing the LEFT/ RIGHT button a...
Page 70 - Setting up the play back function using the LCD monitor; Menu Tab
《 69 》 Setting up the play back function using the LCD monitor ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAYmode, pressing the MENU button displays the menu on the LCD monitor. Themenus you can set up in Play mode are as follows. To capture an image aftersetting up the p...
Page 77 - start from after the last stored file name.; : You can check shooting information about the displayed image.; On Screen Display information
《 76 》 ● When this menu is selected without inserting a memory card, the [No Card]message will display. ● If there is not enough space available in the memory card to copy savedimages in the internal memory (48MB), the [Copy To Card] command willcopy only some of the images and display [Memory Full!...
Page 78 - Easy printing; PictBridge; Connecting the Camera to a Printer
《 77 》 ※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridgecompatible printer to the camera through USB cable with [Connecting Computer]message. By pressing the Printer button, at this point, you can connect the easyprinting mode with [Connecting Printer] message. In some in...
Page 80 - Important notes
《 79 》 PictBridge : Reset ■ Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [Yes] is selected : All print and ima...
Page 81 - Extremes in temperature may cause problems.
《 80 》 Important notes ■ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turnthe camera off and wait for at least 1 hour until all moisture is dispersed...
Page 85 - Specifications; Storage; Internal memory : Approx.48MB flash memory; “E” Button
《 84 》 Sharpness Soft+, Soft, Normal, Vivid, Vivid+ Color Effect Normal, B&W, Sepia, Red, Green, Blue, Negative, User Set White Balance Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,Tungsten, Custom Voice Recording Voice Recording (max.10 hour)Voice Memo in Still Image (max. 10 sec.) Date...
Page 87 - Setting up the application software; You can visit the Samsung web-site through the internet.; About the software
《 86 》 Setting up the application software ■ To use this camera with a PC, install the application software first.After this has been done, the stored images in the camera can be moved to thePC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet. ...
Page 89 - Starting PC mode; Camera settings for connection
《 88 》 Starting PC mode • If you connect the USB cable to a USB port on your PC and then turn on thepower, the camera will automatically switch to "computer connection mode". • In this mode, you can download stored images to your PC through the USBcable. ■ Camera settings for connection 1. T...
Page 90 - Connecting the camera to a PC
《 89 》 ■ Connecting the camera to a PC ■ Disconnecting the camera and PC : Refer to page 89 (Removing the removabledisk). ※ If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will display and the connectionwill not be established. In t...
Page 91 - CAUTION
《 90 》 Removing the removable disk ■ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finishedblinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ME/XP/Vista(The illustrations may differ from ...
Page 92 - Select an image file and copy or move it to MAC.; A USB Driver for MAC is not included with the software CD as MAC OS; Setting up the USB Driver for MAC
《 91 》 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and theremovable disk will be removed safely. 7. Unplug the USB cable. Removing the removable disk 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. Using the USB Driver for MAC 1. Double click a ...
Page 94 - Digimax Master
《 93 》 Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, ima...
Page 96 - FAQ
《 95 》 FAQ ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC.Sometimes, the camera may appear under [Unknown Devices] inDevice Manage...
Page 97 - When the DirectX 9.0 or later is not installed
《 96 》 FAQ Samsung Techwin cares for the environment at all productmanufacturing stages to preserve the environment, and istaking a number of steps to provide customers with moreenvironment-friendly products. The Eco mark representsSamsung Techwin's will to create environment-friendlyproducts, and i...
Page 98 - FCC notice; the receiver is connected.; Declaration of Conformity; Trade Name; MEMO
《 97 》 FCC notice ■ ■ NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to pro-vide reasonable protection against harmful interference in aresidential installation.This equipment gener...
