Samsung MWR-WW00N - User Manual

Page 2 - Contents

2 Contents PREPARATION PART Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Description of each icon . . . . . . . . . . ....

Page 4 - Safety precautions; WARNING; CAUTION

4 Safety precautions This content is intended to protect the user’s safety and prevent property damage. Please read it carefully for correct use of the product. WARNING Hazards or unsafe practices that may result in severe personal injury or death . CAUTION Hazards or unsafe practices that may resul...

Page 6 - Description of each icon; Display

6 Description of each icon Display ② ① ⑪ ⑩ ⑬ ④ ⑤ ⑥ ⑦ ③ ⑧ ⑨ ⑫ LED indicator (Green: Normal / Red: Need to be checked) On/Off button Temperature control button • Without opening the cover of your wired remote controller, you can turn Hydro unit/Hydro unit HT on or off or set the desired temperature. N...

Page 8 - Description of each control; Buttons

8 Description of each control Buttons ③ ① ⑦ ⑧ ④ ② ⑮ ⑨ ⑭ ⑫ ⑬ ⑩ ⑪ ⑥ ⑤ ki]_TWZ`^[hTW\pizvsGk}tGo{G㡔㉔⫠⯜䀜l|luUGGG_ YWYYTXXTY_GGG㝘㤸G`aZ^aX]

Page 10 - Operating basic mode of Hydro unit/Hydro unit HT; Auto

10 Operating basic mode of Hydro unit/Hydro unit HT Operate basic mode by pressing the [Mode] button. Auto Hydro unit/Hydro unit HT will automatically adjust the temperature of discharge water with auto mode for indoor heating. Cool You can adjust cooling temperature as you like with cool mode to co...

Page 12 - DHW mode of Hydro unit/Hydro unit HT; Checking current temperature

12 DHW mode of Hydro unit/Hydro unit HT You can adjust temperature of hot water tank by providing hot water. Press the Mode button in DHW. f Select (economic), (standard), and (power) by pressing the Mode button in DHW section. • You cannot select cool mode during the hot water mode.• To operate hot...

Page 13 - Checking set temperature; Outing mode

13 ENGLISH Checking set temperature You can check the set temperature of current operation mode by the set temperature check function. Check the set temperature by pressing the Set button. f The set temperature of basic operation mode and hot water mode can be checked by pressing the Set button repe...

Page 14 - Setting weekly timer

14 Setting weekly timer You can operate or stop a desired mode on the day and time you reserve. (Only cool/heat mode can be set.) 1. Press the Timer button. f (Timer) will be displayed and then select 'Weekly' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] button. 2. After pressing ...

Page 16 - Setting a holiday with weekly timer

16 Setting a holiday with weekly timer You can set a holiday with the weekly timer. The set weekly timer will not function when holiday setting is applied. 1. Press the Timer button. f (Timer) is displayed and then select 'Holiday' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] butt...

Page 17 - Canceling a weekly timer; Initializing a weekly timer

17 ENGLISH Canceling a weekly timer You can cancel weekly timer function. 1. Press the Timer button. f (Timer) is displayed and (Weekly) will blink. 2. After pressing the [＞] button, select the 'Day' you want to cancel. f Select a reserved day by pressing the [∧] / [∨] button. 3. After pressing the ...

Page 18 - Setting daily timer

18 Setting daily timer Hydro unit/Hydro unit HT can operate or stop at the time you reserve every day. (Only standard hot water mode can be set.) 1. Press the Timer button. f (Timer) will be displayed and then select 'Daily' among 'Daily', 'Weekly', or 'Holiday' by pressing the [∧] / [∨] button. 2. ...

Page 20 - How to set the detailed setting (User setting mode)

20 How to set the detailed setting (User setting mode) 1 2 3 4 Main menu Sub-menu SEG Used 1. If you want to enter the user set mode, press the User set button. f You will enter the User Set mode, and the 'main menu' will be displayed. 2. Refer to the Wired Remote Controller’s User Set list on the n...

Page 21 - User setting mode

21 ENGLISH User setting mode Main menu Sub- menu Function SEG number Default Range Unit 1 1 All lock 1 0 0-Unlock, 1-Lock - 2 Partial key lock Operation On/Off key lock 1 0 0-Unlock, 1-Lock Mode key lock 2 0 0-Unlock, 1-Lock Temperature setting key lock 3 0 0-Unlock, 1-Lock Timer key lock 4 0 0-Unlo...

Page 24 - Trouble shooting

24 Trouble shooting Before reporting the problems of your appliance, please check the trouble shooting table below. PROBLEM SOLUTION Hydro unit/Hydro unit HT does not work. • Check if there is a power failure. After checking the status of power supply, operate the product again. • Check if auxiliary...

Page 25 - Memo

25 ENGLISH Memo ki]_TWZ`^[hTW\pizvsGk}tGo{G㡔㉔⫠⯜䀜l|luUGGGY\ YWYYTXXTY_GGG㝘㤸G`aZ^aYY