Page 2 - Contents
ENGLISH-2 Contents PREPARATION Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Checking before using the product . . . . ....
Page 3 - Safety precautions; WARNING; CAUTION; Hazards or unsafe practices that may result in; FOR INSTALLATION; Otherwise, electric shock or fire may occur .
ENGLISH-3 01 PREP AR ATION Safety precautions This content is intended to protect the user’s safety and prevent property damage. Please read it carefully for correct use of the product. WARNING Hazards or unsafe practices that may result in severe personal injury or death . CAUTION Hazards or unsafe...
Page 4 - Install the product on a hard and level place that can support its; FOR OPERATION; If the product generates a strange noise, a burning smell or smoke,; Do not attempt to repair, disassemble, or modify the product
ENGLISH-4 Safety precautions FOR INSTALLATION CAUTION Install the product on a hard and level place that can support its weight. X X If the place cannot support its weight, the product may fall down and it may cause product damage . FOR OPERATION WARNING If the product generates a strange noise, a b...
Page 5 - Otherwise, a fire or explosion may occur .
ENGLISH-5 01 PREP AR ATION FOR OPERATION CAUTION Do not allow water to enter the product. X X Otherwise, a fire or explosion may occur . Do not operate the product with wet hands. X X Otherwise, electric shock may occur . Do not spray volatile material such as insecticide onto the surface of the pro...
Page 6 - Checking before using the product; Accessories
ENGLISH-6 Checking before using the product Accessories Item Wireless remote controller Remote controller batteries M4XL16 screws Remote controller holder User manual Quantity 1 2 2 1 1 Shape Select the following places to install the remote controller holder. • Where there is no interference to the...
Page 7 - Using the remote controller; Remote controller buttons
ENGLISH-7 02 BASIC OPER ATION Using the remote controller X f Point the remote controller towards the remote controller receiver of the indoor unit . X f When you press the button on the remote controller correctly, you will hear beep sound from the indoor unit and a transmit indicator( ) appears on...
Page 8 - Remote controller display; Battery changing time
ENGLISH-8 Using the remote controller Remote controller display Operation mode Remote controller transmission Low battery Fan speed Air flow direction Settings Set temperature or on/off set time with the timer function On/Off timer Options • When turning off and turning on the remote controller, the...
Page 9 - Inserting the batteries
ENGLISH-9 02 BASIC OPER ATION Inserting the batteries 1 . Open the battery cover of the remote controller . - Press the ( ) part gently and lift it up in the arrow direction . 2 . Insert the batteries . - Check and match the (+)and (-) signs accordingly . 3 . Close the battery cover . - Match the co...
Page 10 - Basic operation; Auto
ENGLISH-10 Basic operation Basic operation is an operation mode that can be selected by pressing the Mode button . Auto In Auto mode, the air conditioner will automatically adjust the temperature and fan speed to maintain your fresh environment . X f When the indoor temperature is too high, the powe...
Page 12 - Selecting air flow direction
ENGLISH-12 Basic operation Selecting air flow direction This function allows you to shift the air flow direction up and down or left and right . Press the or button to move the air flow direction up and down or left and right while the air conditioner is turned on. Remote controller display X f When...
Page 13 - Setting the On/Off timer; Setting the On timer
ENGLISH-13 03 TIMER Setting the On/Off timer You can set the air conditioner to be turned on or off automatically at desired time . Setting the On timer When the air conditioner is turned off. Remote controller display 1 . Press the Timer button to select (On) . - (On) indicator will keep blinking a...
Page 14 - Setting the Off timer
ENGLISH-14 Setting the On/Off timer Setting the Off timer When the air conditioner is turned on Remote controller display 1 . Press the Timer button to select (Off ) . - (Off ) indicator will keep blinking and you can set the time . 2 . Press the < or > button to set the time . - You can set t...
Page 15 - Setting the good’sleep mode; When the air conditioner is operating in Cool mode
ENGLISH-15 03 TIMER Setting the good’sleep mode For a comfortable sleep, the air conditioner will operate in 3 stages in order of ‘Fall asleep Sound sleep Wake up’ stages . When the air conditioner is operating in Cool mode; Remote controller display 1 . Press the Timer button to select ( ) . - ...
Page 17 - Using the Turbo function; When the air conditioner is operating in Cool or Heat mode
ENGLISH-17 04 OPTIONS Using the Turbo function You can set the Turbo function to provide fast and powerful cooling (heating) . When the air conditioner is operating in Cool or Heat mode; Remote controller display 1 . Press the Options button . 2 . Press the <, > or Options button until (Turbo)...
Page 18 - Using the Purity function; When the air conditioner is turned on; When the air conditioner is turned off
ENGLISH-18 Using the Purity function Purity function will remove harmful materials in the air to provide you clean and healthy environment .You can select this function additionally while the air conditioner is in operation . When the air conditioner is turned on Remote controller display 1 . Press ...
Page 19 - Using the Quiet function
ENGLISH-19 04 OPTIONS Using the Quiet function You can reduce the noise generated from the indoor unit during Cool/Heat mode . When the air conditioner is operating in Cool or Heat mode; Remote controller display 1 . Press the Options button . 2 . Press the <, > or Options button until (Quiet)...
Page 20 - Selecting an indoor unit; Selecting a blade
ENGLISH-20 Selecting an indoor unit You can select and operate individual indoor units out of 4 indoor units . When the air conditioner is turned on Remote controller display 1 . Press the Settings button . 2 . Press the <, > or Settings button until (Zone) indicator starts to blink . 3 . Pres...
Page 21 - Appendix
ENGLISH-21 06 O THERS Appendix Detailed control specification of a remote controller by each indoor unit frame Classification Global_4way [Inverter] G_Mini4way [Inverter] Duct [Inverter] Up and down swing Supported Supported Not supported Left and right swing Not supported Not supported Not supporte...