Samsung LS24R350FHEXXY - User Manual

5 Cleaning High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product(Service fee will be charged.) Do not press the product screen with hands or oth...

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Keep the plastic packaging out of the reach of children. ‒ Children may suffocate. • Do not install the product on an unstable or vibrating surface (insecure shelf...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. • Disconnect the power cord from...

10 Parts Control Panel ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Return LEFT JOG Button RIGHT DOWN PRESS(ENTER) UP Power LED Parts Description JOG Button Multi directional button that helps navigate. ― The J...

11 Brightness Auto Adjustment Features Eye Saver Mode Off • UP/DOWN: Adjust Brightness , Contrast , Sharpness . • LEFT/RIGHT: Adjust Auto Adjustment . ― Changing the resolution in Display Properties will activate the Auto Adjustment function. ― This function is only available in Analog mode. • PRESS...

12 Function Key Guide ― To use the Function Key Guide, press the JOG button. Then the following window appears. Return UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.PRESS(ENTER): The selected item will be applied. Description Selects ...

13 When the product displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode UP Source Change Down PRESS(ENTER) for 2 seconds Power Off When the product displays the menu the JOG Button co...

14 Port Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to a PC using the D-SUB cable. Connects to the AC/DC adapter. Types of Ports ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. ...

15 Adjusting the Product Tilt ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2.0° (±2.0°) ~ 22.0° (±2.0°) • You can adjust the product tilt. • Hold the lower part of the product and adjust the tilt carefully. An...

16 Precautions for moving the product ― Power the product off and remove the power cable from the power socket. • Do not directly apply pressure on the screen. • Do not hold the screen when moving the monitor. • Do not hold the product upside down only by the stand. • Hold the lower corners or edges...

17 • Notes ‒ Using a screw longer than the standard length can damage the internal components of the product. ‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒ Do not use screws that do not comply with the VESA s...

18 1 2 3 4 Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base. Place a soft cloth over the table to protect the product and place the product onto the cloth...

19 1 2 3 4 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Remove the screws from the bottom of the stand neck. While holding the product with one hand, pull the stand neck with your other hand to in ...

20 Connecting and Using a Source Device Chapter 03 Read below before installing the monitor. 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. 2 Before installing the product, ma...

21 Connection Using the HDMI Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. HDMI IN Connection Using the HDMI-DVI Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. HDM...

22 Tidying Up the Connected Cables 1 2 3 Connect cables to their port and route them through the ring on the back of the stand. Push the cables further close to the stand. Route the cables through the HOLDER-CABLE. 4 5 Secure the HOLDER-CABLE to the stand. (HOOK type) Cables arrangement is complete.

23 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

24 Screen Setup Function Key Guide → → Picture Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The colour and shape of parts may dif...

25 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Eco Saving Plus is enabled. ― This men...

27 Picture Size Change the picture size. ― This option is not available when FreeSync is enabled.. In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display the picture in full screen regardless of the aspect ratio of the input source. In AV mode • 4...

28 Adjusting OSD (On Screen Display) settings Function Key Guide → → On Screen Display A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from w...

29 Setup and Reset Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subje...

31 FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.The displayed FreeSync menu items on the product may vary, depending on the product mo...

32 Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the product panel. ― This option is not available when SAMSUNG M A G I C Bright is in Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled. ― This menu is no...

33 Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. • Working : The power LED is on when the product is turned on. • Stand-by : The power LED is on when the product is turned off. Reset All Return all the settings for the product to the...

35 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

36 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Product diagnosis (Screen issue) If a problem occurs wi...

37 The message Check Signal Cable appears. Check that the cable is properly connected to the product.Check that the device connected to the product is powered on. Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency fo...

39 Specifications Chapter 10 General Model Name S22R350FH*/S22R352FH*/S22R354FH*/S22R356FH*/S22R358FH* S24R350FH*/S24R352FH*/S24R354FH*/S24R356FH*/S24R358FH* Size 22 Class (21.5 Inches / 54.6 cm) 24 Class (23.8 Inches / 60.4 cm) Display area 476.064 mm (H) x 267.786 mm (V)18.7 Inches (H) x 10.5 Inch...

41 Standard Signal Mode Table Model Name S22R350FH*/S22R352FH*/S22R354FH*/S22R356FH*/S22R358FH*/S24R350FH*/S24R352FH*/S24R354FH*/S24R356FH*/S24R358FH* Synchronization Horizontal Frequency 30 – 81 kHz Vertical Frequency 56 – 75 Hz (VGA)50 – 75 Hz (HDMI Freesync off) Resolution Optimum Resolution 1920...

44 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...