Page 2 - SAFETY INFORMATION; SAFETY WARNINGS; WARNING; CAUTION; Wiring the Main Power Supply
ENG - 2 SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTIO...
Page 3 - PRECAUTIONS
ENG - 3 However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug...
Page 4 - CONTENTS; Checking the Components; ABOUT THIS MANUAL
ENG - 4 CONTENTS 01 Checking the Components 6 Inserting battery (AAA) into the Remote Control ------------------------- 6 02 Product Overview 7 Front / Right Side Panel of the Soundbar ------------------------- 7 Bottom Panel of the Soundbar ------------------------- 8 03 The Remote Control 9 Using ...
Page 5 - Specifications and Guide
ENG - 5 05 Connecting to a TV 14 Connecting using an Optical Cable ------------------------- 14 Connecting a TV or Bluetooth Device via Bluetooth ------------------------- 16 Connecting a Soundbar to a mobile device via NFC function ------------------------- 17 06 Connecting an External Device 20 Co...
Page 6 - 1 CHECKING THE COMPONENTS; Inserting battery (AAA) into the Remote Control
ENG - 6 01 CHECKING THE COMPONENTS Soundbar Main Unit Power Cord Remote Control / Battery (AAA x 1) • User Manual / Warranty Card / Regulatory Guide (Not available in some locations). • For more information about the power supply and power consumption, refer to the label attached to the product. (La...
Page 7 - 2 PRODUCT OVERVIEW; Front / Right Side Panel of the Soundbar
ENG - 7 02 PRODUCT OVERVIEW Front / Right Side Panel of the Soundbar AUX IN POWER DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) AUX IN POWER DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) Volume Power Position the product so that the SAMSUNG logo is located on the top. Right Side of the Soundbar NFC LED indica...
Page 8 - Bottom Panel of the Soundbar
ENG - 8 NFC Logo You can activate your Bluetooth connection by placing your phone in the NFC detection area of the Soundbar. Source Selects the source input mode. ( D.IN / Bluetooth / AUX / USB ) • To turn on “ Bluetooth pairing ” mode, change the source to “ Bluetooth ” mode and then press and hold...
Page 9 - 3 THE REMOTE CONTROL
ENG - 9 03 THE REMOTE CONTROL • The images, buttons, and functions of the remote control may differ depending on the model. Turns the Soundbar on and off. Press this button to mute the sound. Press it again to unmute the sound. Press this button to pair a new Bluetooth device. Press to enter the ...
Page 10 - Using the Hidden Buttons (Buttons with more than one function)
ENG - 10 Using the Hidden Buttons (Buttons with more than one function) Hidden Button How to Use the Remote Control Remote Control Button Function Auto Power Down On/Off (AUX mode) – D.IN / Bluetooth / USB / AUX Mode : If there is no audio signal for 18 minutes. – If there is no KEY input for 8 hour...
Page 12 - Adjusting the Soundbar volume with a TV remote control; The default mode for this function is control by a Samsung TV.
ENG - 12 Adjusting the Soundbar volume with a TV remote control If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote t...
Page 13 - 4 CONNECTING THE SOUNDBAR; Connecting Electrical Power
ENG - 13 04 CONNECTING THE SOUNDBAR Connecting Electrical Power • For information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) AUX IN POWER DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) POWER Power Cord E...
Page 14 - 5 CONNECTING TO A TV; Connecting using an Optical Cable; Step 1. Connect an Optical Cable
ENG - 14 05 CONNECTING TO A TV Hear TV sound from your Soundbar through wired or wireless connections. • When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the TV’s remote control. – This feature is supported by 2017 and later Samsung Smart TVs that support Bl...
Page 15 - Step 2. Change the Soundbar’s mode to D.IN; Auto Power Link
ENG - 15 Step 2. Change the Soundbar’s mode to D.IN Right Side of the Soundbar (OR) W Auto Power Link This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is connected to the TV by an Optical Cable (not supplied). Press and hold the button on the remote control ...
Page 16 - Connecting a TV or Bluetooth Device via Bluetooth; Step 1. Change the Soundbar mode to “Bluetooth Pairing”; Step 3. Check the Soundbar’s status; If the TV or device fails to connect
ENG - 16 Connecting a TV or Bluetooth Device via Bluetooth Step 1. Change the Soundbar mode to “Bluetooth Pairing” B Fast-Blinking Step 2. Select the Soundbar in your TV’s or Bluetooth device’s Menu Select “[AV] Samsung Soundbar T400 T-Series” Bluetooth device (OR) Bluetooth menu NOTE – You cannot c...
Page 17 - Disconnecting the Soundbar from the TV; Connecting a Soundbar to a mobile device via NFC function
ENG - 17 Disconnecting the Soundbar from the TV Press the button on the right side panel or on the remote control and switch to any mode but “ Bluetooth ”. • Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) ...
Page 18 - Step 2. Check the Soundbar’s status
ENG - 18 Step 2. Check the Soundbar’s status The blue LED should not be blinking once the Bluetooth connection is complete. B NOTES – If asked for a PIN code when connecting a Bluetooth device, enter <0000>. – The Soundbar automatically turns off after 18 minutes in the Ready state. – The Soun...
Page 19 - Bluetooth Power On/Off; More About Bluetooth
ENG - 19 Bluetooth Power On/Off If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power function is on and the Soundbar is turned off, the Soundbar turns on automatically.Press and hold the button for more than 5 seconds in the power on station to trigger/shu...
Page 20 - 6 CONNECTING AN EXTERNAL DEVICE; Step 1. Connect using an Optical Cable
ENG - 20 06 CONNECTING AN EXTERNAL DEVICE Connect to an external device via an optical cable or analogue cable to play the external device’s sound through the Soundbar. Connecting using an Optical Cable Step 1. Connect using an Optical Cable AUX IN DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Bottom of th...
Page 21 - Connecting using an Analogue Audio (AUX) Cable; Step 2. Change the Soundbar’s mode to AUX
ENG - 21 Connecting using an Analogue Audio (AUX) Cable Step 1. Connect using an Analogue Audio (AUX) Cable AUX IN DIGITAL AUDIO IN (OPTICAL) - AUDIO - R L AUX IN DIGITAL AUDIO IN (OPTICAL) - AUDIO - R L Bottom of the Soundbar Audio (AUX) Cable (not supplied) BD / DVD player / Set-top box / Game con...
Page 22 - 7 CONNECTING A USB STORAGE DEVICE; Step 1. Connect a USB Drive; Step 2. Change the Soundbar’s mode to USB
ENG - 22 07 CONNECTING A USB STORAGE DEVICE Step 1. Connect a USB Drive USB (5V 0.5A) Bottom of the Soundbar NOTE – The Soundbar automatically turns off (Auto Power Off) if you do not connect a USB device to the Soundbar within 18 minutes. Step 2. Change the Soundbar’s mode to USB Right Side of the ...
Page 23 - Setting Repeat Play Options; Repeat play
ENG - 23 Setting Repeat Play Options Repeat play When the Soundbar is in “ USB ” mode, each time you press the button the “ USB ” mode changes how it plays tracks in the following order: “ Repeat - Off ” > “ Repeat - 1 song ” > “ Repeat - All songs ”. See the table below for details. Mode Remo...
Page 24 - File Format Type Compatibility list
ENG - 24 File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 16kHz ~ 48kHz 80kbps~320kbps MPEG 1 Layer3 16kHz ~ 48kHz 80kbps~320kbps MPEG 2 Layer3 16kHz ~ 48kHz 80kbps~320kbps MPEG 2.5 Layer3 16kHz ~ 48kHz 80kbps~320kbps *.wma Wave_Format_MSAudio1 16kHz ~ 48...
Page 25 - 8 SYSTEM INITIALISE
ENG - 25 08 SYSTEM INITIALISE W W W W R AUX IN POWER DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) Right Side of the Soundbar 5 Sec Blinking X 2 With the Soundbar on, press the (Volume) buttons on the body at the same time for at least 5 seconds. CAUTION – All the settings of the Soundbar are initialised...
Page 26 - 9 INSTALLING THE WALL MOUNT; Installation Precautions; Wall mount Components
ENG - 26 09 INSTALLING THE WALL MOUNT (OPTIONAL) Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another install...
Page 29 - UPDATE; Update Procedure
ENG - 29 10 SOFTWARE UPDATE Samsung may offer updates for the Soundbar’s system firmware in the future. USB (5V 0.5A) Bottom of the Soundbar If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For mor...
Page 30 - When update fails
ENG - 30 When update fails 1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port. 2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar. NOTES – The firmware update may not work properly...
Page 31 - 1 TROUBLESHOOTING; The unit will not turn on.; A function does not work when the button is pressed.; Sound dropouts occur in Bluetooth mode.; The remote control does not work.
ENG - 31 11 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord firmly plugged into the wall outlet? ; Unplug and reconnect the power cord to the wall outlet to make sure the connection is secure. A function does not work when the button is pr...
Page 33 - 5 SPECIFICATIONS AND GUIDE
ENG - 33 15 SPECIFICATIONS AND GUIDE Specifications Model Name HW-T400 USB 5V/0.5A Weight 2.0 kg Dimensions (W x H x D) 641.0 x 65.0 x 107.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % Supported play formats(DTS 2.0 sound is played in DTS format.) LPCM 2ch, Dolb...
