Page 2 - Safety information; Safety WarningS
Safety information Safety WarningS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product tha...
Page 3 - impOrtant Safety inStrUCtiOnS
E N G impOrtant Safety inStrUCtiOnS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Page 4 - preCaUtiOnS
preCaUtiOnS Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not co...
Page 5 - EnG; Features
EnG Digital AV Receiver This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. Dolby Pro Logic llx Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provide...
Page 6 - Contents
Contents SAfETy infORmATiOn 2 2 Safety Warnings 3 Important Safety Instructions 4 Precautions fEATURES 5 5 Accessories DESCRiPTiOn 8 8 Front Panel 10 Rear Panel12 Display13 Insert Remote Control Batteries13 Operation Range of the Remote Control14 Tour of the Remote Control COnnECTiOnS 16 16 Speaker ...
Page 7 - troubleshooting; appendix; miscellaneous
EnG ● contents troubleshooting 61 61 Troubleshooting appendix 63 63 Specifications miscellaneous 58 58 Operating Your TV with the Remote Control60 Operating Your DVD or BD PLAYER with the Remote Control HT-AS730S-XAA_0205.indd 7 2009-02-05 �� 3:59:01
Page 8 - Description; frOnt paneL
Description frOnt paneL 1 STANDBY/ON button Sets the AV receiver to Standby. 2 VOLUME Control Adjusts the volume level. 3 SELECT button Used to change the radio frequency or select detailed options in Surround mode. 4 TUNING MODE button Used to select Manual or Auto mode for FM radio. 5 TONE CONTROL...
Page 10 - rear paneL
10 rear paneL 1 FM Antenna JACK Connect the FM Antenna here. 2 7.1 CH ANALOG AUDIO INPUT JACKS Receives the analog audio signal from an external player with a multi-channel port. 3 VIDEO INPUT JACKS Receives the video signal from a video player (DVD, SAT, TV, VCR). 4 HDMI INPUT JACKS Receives digita...
Page 12 - DiSpLay
1 DiSpLay 1 SPEAKER INDICATORS Receives the audio/video signal from an iPod. 2 LISTENING MODE INDICATORS Displays the current listening mode. 3 TUNING INDICATORS Displays the status of the current radio broadcasting. 4 AUDIO INPUT INDICATORS Displays the input signal type of the current audio source...
Page 13 - insert remote control batteries; operation range oF the remote control
13 EnG ● Description insert remote control batteries Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Use the correct type of batteries. Batteries that look similar may differ in voltage.Always ...
Page 14 - Tour of The remoTe ConTrol
14 Tour of The remoTe ConTrol HT-AS730S-XAA_0213.indd 14 2009-02-16 �� 2:54:57
Page 16 - Speaker pOSitiOning; position of aV receiver; Subwoofer function; front Speakers; Connections
1 Speaker pOSitiOning position of aV receiver Place AV Receiver on a dedicated stand or rack. Subwoofer SBL SBR The position of the subwoofer is not so critical. Place it anywhere you like. Subwoofer function Active subwoofer with integrated 150W amplifier provides rich bass sound. Connect the SW OU...
Page 17 - Center speaker
1 E N G ● COnne C ti O n S Speaker pOSitiOning (COntinUeD) Center speaker SBL SBR It is best to install it at the same height as the front speakers.You can also install it directly over or under the TV. Surround Speakers SBL SBR SBL SBR Place these speakers behind your listening position.If there is...
Page 18 - COnneCting tHe SpeakerS; Connecting Speaker Wire
1 COnneCting tHe SpeakerS Connecting Speaker Wire Loosen the knob by turning counterclockwise.Insert the bare part of the wire into the hole in the side of each terminal.Tighten the knob by turning clockwise to secure the wire. Keep the subwoofer speaker out of reach of children to prevent them from...
Page 19 - ConneCting the Video out to your tV; Video Connection; Audio Connection
19 EnG ● Conne C tions ConneCting the Video out to your tV Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Input j...
Page 20 - COnneCting eXternaL DeViCeS/yOUr tV Via HDmi; TV; DVD or Blu-RAY Player SAT
0 COnneCting eXternaL DeViCeS/yOUr tV Via HDmi HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, settop box and more.HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was...
Page 21 - HDmi fUnCtiOn
1 E N G ● C O nne C ti O n S HDmi fUnCtiOn Using anynet+(HDmi-CeC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSU...
Page 22 - audio Connection; DVD or BD Player
COnneCting a DVD Or BD(Blu-ray) pLayer Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (DVD) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (DVD) jack o...
Page 23 - COnneCting a CaBLe, SateLLite Or Set-tOp BOX; SAT
E N G ● C O nne C ti O n S COnneCting a CaBLe, SateLLite Or Set-tOp BOX Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from th...
Page 24 - COnneCting a VCr; VCR
COnneCting a VCr Video Connection for playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. for recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VC...
Page 25 - COnneCting a CD pLayer; CD player; or
E N G ● C O nne C ti O n S COnneCting a CD pLayer audio Connection Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. If the external component has only one audio output jack,...
Page 26 - COnneCting 7.1 CHanneL DeViCeS
COnneCting 7.1 CHanneL DeViCeS You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output. FRONT SURROUND SURROUND BACK SUB WOOFER CENTER C SW SW C 5.1 CH7.1 CH 7.1 Channel device HT-AS730S-XAA_0204.indd 26 2009-02-05 �� 11:47:28
Page 27 - COnneCting an ipod; Disconnecting an ipod
E N G ● COnne C ti O n S COnneCting an ipod You can listen to the audio from an iPod through the main unit. For iPod operation with your receiver, see pages 28 and 54 ~ 55. Connect the iPod dock connector to the iPod jack on your reciever.Place the iPod in the Dock. If you want to play a movie store...
Page 28 - ipod models that are compatible with Ht-aS730S
COnneCting an ipod (Continued) ipod models that are compatible with Ht-aS730S “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of...
Page 29 - ENG; COnneCting tHe fm antenna; COnneCting aUX COmpOnentS; Camcorder
ENG ● COnneCtiOnS COnneCting tHe fm antenna Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface. Do not place the antenna cable cl...
Page 30 - setup; SetUp menU tree
0 setup For your convenience, you can set this AV receiver's features for the best use. SetUp menU tree Here’s a quick look at how the setup menus are organized on your AV Receiver. INPUT COAXIAL DVD OPTICAL 1,2,3 COAXIAL SAT OPTICAL 1,2,3 COAXIAL TV OPTICAL 1,2,3 COAXIAL CD OPTICAL 1,2,3 COAXIAL AU...
Page 34 - inpUt SetUp; Selecting a source device and connection jack
inpUt SetUp Selecting a source device and connection jack Select the external devices you have connected to the receiver. Press SETUP/MENU button “INPUT” appears on the display and goes into Setup Mode. Press the ▶ button to select a desired device. Press the ▲ or ▼ button to select a desired jack. ...
Page 35 - Speaker SetUp; Setting the speaker size
E N G ● S etU p Speaker SetUp Setting the speaker size Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not. Press SETUP/MENU button. “INPUT” appears on the display. Press ▲▼ button to select “SPE...
Page 36 - Setting the speaker listening distance
Speaker SetUp (Continued) Setting the speaker listening distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. Press SETUP/MENU button. “INPUT” appears on the display and goes...
Page 37 - Setting the speaker level
E N G ● S etU p Speaker SetUp (Continued) Setting the speaker level You can set the balance and level of speakers. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SPEAKER", and then press the ENTER . Press ▲▼ button to select "...
Page 38 - Setting the test tone
Speaker SetUp (Continued) Setting the test tone Use the test tone to check the speaker connection status or level. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SPEAKER", and then press the ENTER . Press ▲▼ button to select "...
Page 39 - SUrrOUnD SetUp; Setting the stereo mode
E N G ● S etU p SUrrOUnD SetUp Setting the stereo mode You can select this mode when listening to sound through the front left and right speakers and subwoofer. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then pr...
Page 40 - Setting Dolby pro Logic ii X mode
0 SUrrOUnD SetUp (Continued) Setting Dolby pro Logic ii X mode This mode provides 7.1 channel sound from 2 channel sources. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then press the ENTER . Press ▲▼ button to se...
Page 43 - Setting tone Control
E N G ● S etU p SUrrOUnD SetUp (Continued) Setting tone Control This will enable you to adjust the bass and treble level. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select "SURROUND", and then press the ENTER . Press ▲▼ button to sele...
Page 44 - OptiOn SetUp; aV SynC; mp3 enhancer; Smart Volume
OptiOn SetUp The Option menu enables you to make different audio settings to enhance your AV receiver experience. Press SETUP/MENU button. “INPUT” appears on the display and goes into Setup Mode. Press ▲▼ button to select the “OPTION”, and then press the ENTER . Press ▲▼ ◀▶ button to set the OPTION ...
Page 46 - DrC; HDmi Setup
OptiOn SetUp (Continued) DrC You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. Each time you press ▲▼ button, DRC : STD DRC : MIN DRC : MAX will be selecte...
Page 47 - Operation; BefOre USing tHe aV reCeiVer; remote control functions
E N G ● Operati O n Operation BefOre USing tHe aV reCeiVer turning On/Off Connect the power plug to the outlet.Press the POWER button of the remote control. This unit will be turned on or set to Standby mode. remote control functions You can operate your AMP (this AV receiver), TV, DVD and BD player...
Page 48 - SeLeCting DigitaL/anaLOg inpUt
SeLeCting DigitaL/anaLOg inpUt You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.Press the INPUT MODE button on the remote control to select the external device you have connected. Each time you press this button, input mode changes as follows: for DVD/Sat function ...
Page 49 - USing tHe SUrrOUnD mODeS
E N G ● Operati O n USing tHe SUrrOUnD mODeS Using the neO:6 mODe button Press nEO:6 mODE button.- Each time you press this button, MUSIC CINEMA will be selected in turn. Using the Sfe mODe button Press SfE mODE button. Each time you press this button, HALL 1 HALL 2 J.CLUB CHURCH ROCK CL...
Page 50 - Using the SUrrOUnD button on the front of the main unit; Selecting the nEO:6 mode
0 USing tHe SUrrOUnD mODeS (Continued) Using the SUrrOUnD button on the front of the main unit Selecting the nEO:6 mode Press SURROUND button briefly to select “NEO:6” mode. Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn. Press SELECT ( . , , ) button. Each ti...
Page 52 - USING THE SPEAKER ADJUSTMENT BUTTONS; Using the SPK SELECT button; Using the SPK LEVEL button; Using the Test Tone button
52 USING THE SPEAKER ADJUSTMENT BUTTONS Using the SPK SELECT button Press SPK SELECT button to select the speaker you want. Each time you press this button, FRONT CEN SURR S.BACK S.W CROVR SPK MODE OFF will be selected in turn Press ▲▼ button to set the mode (Large, Small etc.) for the s...
Page 53 - LiStening tO tHe raDiO; presetting radio stations
E N G ● Operati O n LiStening tO tHe raDiO You can listen to the radio by using either automatic or manual tuning. Press TUNER button. Selected frequency. Automatic tuning 1 : 1) Press TUNING MODE button to select PRESET. 2) Press TUNING/CH ( . , , ) button to select the preset frequency. Automatic ...
Page 54 - Using An iPod
54 Using An iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPOD audio function) You can play music files stored in the iPod player by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV Receiver.Place the iPod ...
Page 56 - COnVEniEnT FUnCTiOns; sleep timer function; Mute function; reset function
56 COnVEniEnT FUnCTiOns sleep timer function You can set the time that this unit will shut itself off. Press SLEEP button. SLEEP : OFF 15 30 45 60 90 120 M (MIN) will be selected in turn. To check sleep timer Press the SLEEP button. The remaining time before this unit will shut itself of...
Page 57 - adjust the display; Using headphones
E N G ● Operati O n COnVenient fUnCtiOnS (Continued) adjust the display You can adjust the brightness of the display. Press the DIMMER button. Each time you press this, the brightness changes as follows : DARK BRIGHT. Using headphones Use headphones (not supplied) for private listening pleasure. C...
Page 58 - Miscellaneous; Operating yOUr tV WitH tHe remOte COntrOL
Miscellaneous Operating yOUr tV WitH tHe remOte COntrOL Press POWER button to turn on the TV. Press TV button to set the remote to TV mode. Point the remote control toward the TV.While holding down POWER button, enter the code corresponding to your brand of TV. If there is more than one code listed ...
Page 59 - TV Brand Code List; Operating yOUr tV WitH tHe remOte COntrOL (Continued)
E N G ● mi SCe LL ane OUS TV Brand Code List Brand Code Number Brand Code Number Brand Code Number Admiral (M.Wards) 056, 057, 058 Luxman 018 Sylvania 018, 040, 048, 054, 059, 060, 062 A Mark 001, 015 LXI (Sears) 019, 054, 056, 059, 060, 062, 063, 065, 071 Anam 001, 002, 003, 004,005, 006, 007, 008,...
Page 60 - Operating yOUr DVD Or BD pLayer WitH tHe remOte COntrOL; BD player Brand Code List
0 Operating yOUr DVD Or BD pLayer WitH tHe remOte COntrOL Press POWER button to turn on the DVD (BD) player. Press DVD (BD) button to set the remote to DVD (BD) mode. If you operate VCR, press VCR button to set the remote to VCR mode. Point the remote control toward the DVD (BD).While holding down P...
Page 61 - Troubleshooting; Symptom
1 E N G ● trOUBL e SHOO ting Troubleshooting Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there sta...
Page 62 - Product protection function; Heat protection
Symptom Check Remedy There is no sound from surround back speakers • Are the surround back speakers connected properly? • Is the S.BACK(Surround Back) selected to NONE in Speaker Setup? • Is Surround Mode set to EX/ES? • Refer to pages 16 ~18 to connect it properly. • Refer to page 35 to select LARG...
Page 63 - Appendix; SpecificationS
63 EnG ● appendix Appendix SpecificationS GENERAL Power supply 120V, 60 Hz Standby power consumption 0.9W Power consumption Main unit 75W Subwoofer 90W Weight 12.7 Ibs Dimensions (W x H x D) 16.9 x 5.7 x 13.7 inches Operating temperature range 41°F~+95°F Operating humidity range 10%~75% FM TUNER Fre...
Page 64 - LIMITED WARRANTY TO ORIGINAL PURCHASER; SAMSUNG AV receiver
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: On...
Page 66 - QUESTIONS OR COMMENTS?
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Code No. AH68-02174R HT-AS730S-XAA_0204.indd 66 2009-02-05 �� 11:48:27
