Page 2 - A Guide to Digital TV; What is Digital Television?; Digital Television Services; Digital Picture Quality; Other countries; See the warranty card for more information on warranty terms.; SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
English - A Guide to Digital TV ● What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting ...
Page 3 - quality it was originally encoded for broadcast.; Can I connect my DTV set-top receiver to my cable TV service?; sharp widescreen images and high-quality audio.
English - Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You sh...
Page 4 - Contents; Connecting a DVD Player or Cable Box / Satellite receiver; Symbols; Press; English
English - 4 Contents Contents General Information ■ Viewing Position ...................................................................... 5 ■ List of Features ....................................................................... 5 ■ Checking Parts ...................................................
Page 5 - industry standards. In addition, it has these special features:
English - General Information Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. List of Features Your TV is designed and engineered using the latest techn...
Page 6 - Viewing the Control Panel; Buttons on the Lower-Right Part of the Panel; Checking Parts; Sold Separately
English - Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Checking Parts Owner’s Instructions Remote Control...
Page 7 - you would use the ◄ and ► buttons on the remote; CH; you would use the ▲ and ▼ buttons on the remote; TIMER
English - 1 SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2, HDMI3/DVI or USB). 2 MENU Press to see an on-screen menu of your TV’s features. 3 + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VO...
Page 8 - Viewing the Connection Panel; 5Ω Coaxial connector for Air/Cable Network.
English - Viewing the Connection Panel Rear Panel Jacks Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 12~16. 1 ANT IN 75Ω Coaxial connector for Air/Cable Network. 2 HDMI IN 1...
Page 9 - Remote Control
English - Remote Control You can use the remote control up to a distance of about feet from the TV. ➢ The performance of the remote control may be affected by bright light. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to s...
Page 10 - Installing Batteries in the Remote Control; If the remote control doesn’t work! Check the following; Connections; If you have two antennas, see “Separate VHF and UHF Antennas”.; Antennas with 300 Ω Flat Twin Leads
English - 10 Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. ➢ ● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ● Do not mix battery types, ...
Page 11 - Connecting Cable TV; To connect to a cable TV system, follow the instructions below.; Cable without a Cable Box; OUT terminal on the cable box and the B–IN
English - 11 Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the side of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Conne...
Page 12 - provide the highest quality picture.
English - 1 Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via DVI This connection can only be made if there is a DVI Output jack on the external device. 1 Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI3/DVI IN jack on the TV and the DVI jack on the DVD Player...
Page 13 - Connecting a Camcorder; They allow you to view the camcorder tapes without using a VCR; Component cables
English - 1 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR 1 Connect a Video Cable (or S-Video Cable) between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the Camcor...
Page 14 - Connecting a VCR; To begin, follow steps 1–3
English - 14 Connecting a VCR Video ConnectionThese instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system. ➢ If you have a “mono” (non-st...
Page 15 - Connecting an Amplifier / DVD Home Theater; Connecting a Digital Audio System
English - 1 Connecting an Amplifier / DVD Home Theater 1 Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/DVD Home Theater. When an audio amplifier is connected to the “AUDIO OUT [R-AUDIO-L]” jacks terminals: Decrease the volume o...
Page 16 - Press the POWER button on the remote control.; Connecting a PC; Using the D-Sub Cable
English - 1 Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while before you see a full picture. Using the D-Sub Cable1 Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on you...
Page 19 - Press the ▲ or ▼ button to select; Changing Channels
English - 1 If you want to reset this feature... 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ENTER button to select Plug & Play . For further details on setting up options, refer to the pages 17~18. ➢ The Plug &...
Page 20 - Viewing the Menus; the ▲ or ▼ button to select one of the icons.; Adjusting the Volume; Viewing the Display; Press the; INFO
English - 0 Viewing the Menus 1 With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture , Sound , Channel , Setup , Input , Application . Pr ess the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon...
Page 21 - Using the TOOLS Button; Press the ▲/▼ button to select a menu, then press the; Memorizing the Channels
English - 1 Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu changes depending on which external input mode you are viewing. 1 Press the TOOLS button. The TOOLS menu will appear. Press the ▲/▼ button to select a menu, the...
Page 23 - To Select the Source; : Refreshes the connecting external devices.; and; Information; To Edit the Input Source Name; You can also press the; SOURCE; button on the remote control to view an external
English - To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input ...
Page 24 - Changing the Picture Standard; Customizing the Picture Settings; Picture Control
English - 4 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture . Press the ENTER button to select Mode . Press the ▲ or ▼ button to select Dynamic ...
Page 25 - Adjusting the Detailed Settings; : Turns off the black adjustment function.
English - Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings.Activating Detailed Settings1 Press the MENU button to display the menu. Press the ENTER button to select Picture . Pre...
Page 27 - Configuring Picture Options
English - Activating xvYCC Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. 1 Press the ▲ or ▼ button to select xvYCC , then press the ENTER button. 1 Press the ▲ or ▼ button to se...
Page 28 - : Magnifies the size of the picture on the screen.; Zoom; : Enlarges the aspect ratio of the picture to fit the entire screen.; Just Scan; : Use this function to see the full image without any cutoff when; Press the ◄ or ► button to select; Alternately, you can press the
English - Changing the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. ...
Page 30 - Switches off the DNIe mode.; The screen gets brighter.
English - 0 DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. 1 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼...
Page 32 - Using the D Function
English - You can enjoy D movies and games on your TV. The D effects function enables you to view D images using special D glasses. Using the D Function 1 Connect a HDMI/DVI cable between the HDMI3/DVI jack on the TV and the PC output jack on your computer. Connect a 3.5mm Stereo/2RCA cable between ...
Page 33 - Resetting the Picture Settings to the Factory Defaults
English - Resetting the Picture Settings to the Factory Defaults 1 To select the desired picture mode, follow the Changing the Picture Standard instructions numbers 1 and 2. (see page 24) Press the ▲ or ▼ button to select Picture Reset , then press the ENTER button. Press the ◄ or ► button to select...
Page 34 - Using Automatic Sound Settings; : Selects the sound mode among the predefined settings.; Sound Control
English - 4 Using Automatic Sound Settings You can select the sound mode to best suit the programming you're watching. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. Press the ENTER button to select Mode . Press the ▲ or ▼ button t...
Page 35 - Setting the TruSurround XT; TruSurround XT; TruSurround XT; technology is incorporated under license
English - Resetting the Equalizer Settings to the Factory Defaults Press the ▲ or ▼ button to select Reset , then press the ENTER button. ➢ The equalizer resets to the factory defaults. Press the EXIT button to exit. Custom mode returns to default settings. Return Enter Equalizer ▲ Balance L R 100Hz...
Page 36 - Choosing Preferred Language
English - Preferred language1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. Press the ▲ or ▼ button to select Preferred Language , then press the ENTER button. Press the ▲ or ▼ button to choose the language ( English , Spanish , or ...
Page 37 - Automatic Volume Control; Setting the TV Speakers On/Off; Video No Signal
English - 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. Press the ▲ or ▼ button to select Auto Volume , then press the ENTER button. Press the ▲ or ▼ button to select Off or On , then press the ENTER button. Press the EXIT button ...
Page 38 - All the sound values return to default settings.; Resetting the Sound Settings to the Factory Defaults
English - 1 Press the MENU button. Press the ▲ or ▼ button to select Sound , then press the ENTER button. Press the ▲ or ▼ button to select Sound Reset , then press the ENTER button. Press the ◄ or ► button to select Reset All , Reset Sound Mode , or Cancel , then press the ENTER button. • Reset All...
Page 39 - Managing Channels; button on the remote control to bring up the channel lists.; A gray-colored channel indicates the channel has been deleted.; Channel Control
English - Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, first run Auto Program (see page 22). 1 Press the MENU button. Pres...
Page 43 - : Select to change a viewing reservation.; • Cancel Schedules; : Select to cancel a viewing reservation.; • Information
English - 4 Confirming a Viewing Reservation You can view, modify or delete a reservation. 1 Press the MENU button. Press the ▲ or ▼ button to select Channel , then press the ENTER button. Press the ▲ or ▼ button to select Channel List , then press the ENTER button. Press the ◄ button to select Adde...
Page 44 - : You can switch between English letters and Characters.; • Green button; : You can delete an already entered letter or character.; • Yellow button; : Press this button to finish renaming a channel.
English - 44 Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. 1 Press the MENU button. Press the ▲ or ▼ button to select Channel , then press the ENTER button. Press the ▲ or ▼ button to select Channel List , then press the ENTER but...
Page 46 - Checking the Digital-Signal Strength
English - 4 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. Y...
Page 48 - Setting up the TV with your PC
English - 4 Setting up the TV with your PC How to Auto AdjustUse the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. 1 The message Auto Adju...
Page 49 - Wide PC; ) adjustment are available by
English - 4 Changing the Screen PositionAdjust the PC's screen positioning if it does not fit the TV Screen. ➢ Preset: Press the SOURCE button to select PC mode. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture , then press the ENTER button. Press the ▲ or ▼ but...
Page 52 - is active, you can turn on a specific channel or
English - Setting the On/Off TimerUse this feature to set the TV to turn on or off at a desired time. You must set the clock first.1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Time , then press t...
Page 54 - Selecting a Menu Language; Function Description
English - 4 Selecting a Menu Language 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Language , then press the ENTER button. Press the ▲ or ▼ button to select the appropriate language: English , Es...
Page 62 - ENTER; button, and press the ▲ or ▼ button to
English - How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:1 Press the ENTER button to select OK . To resume normal viewing, tune to a differe...
Page 63 - CC; button on the remote control to turn the Caption; On
English - 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Caption , then press the ENTER button. Press the ENTER button to select Caption . Press the ▲ or ▼ button to select On , then press the ENTE...
Page 64 - Default; button on the remote control to select Captions
English - 4 Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels....
Page 65 - Manufactured under license from Dolby Laboratories.; Adjusting the TV On/Off Melody Sound
English - 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ENTER button to select Melody. Press the ▲ or ▼ button to select Off , Low , Medium , or High , then press the ENTER button. Manufactured under license from Dolby L...
Page 66 - Setting the Entertainment mode; Switches the; : Provides the optimal picture and sound quality for sports.; Cinema; experience a richer picture and enhanced sound.; Game
English - Setting the Entertainment mode The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Ente...
Page 67 - Upgrading the Software
English - Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-00-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port locate...
Page 68 - WISELINK; remote control and enter the WISELINK screen again.
English - WISELINK This function enables you to view and listen to photo (JPEG) and audio fi les (MP3) saved on a USB Mass Storage Class (MSC) device. 1 Press the POWER button on the remote control or front panel. ➢ The TV is powered on. Connect a USB device containing JPEG and/or MP3 fi les to the ...
Page 69 - button on the remote control repeatedly to select; then press the; Press the Red button, then press the ▲ or ▼ button to select the
English - Using the WISELINK Menu1 Press the MENU button. Press the ◄ or ► button to select Application , then press the ENTER button. Press the ▲ or ▼ button to select WISELINK , then press the ENTER button. ➢ The WISELINK menu is diplayed. Press the W.LINK button on the remote control to display t...
Page 70 - Using the Photo List; Press the ▲ or ▼ button to change the standard for
English - 0 Using the Photo List This menu shows Photo files and folders saved on an USB memory device. Photo List1 Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select Photo , then press the ENTER button. ➢ This menu only shows files whose fi...
Page 71 - (You can change the compositional information of photos)
English - 1 Help Items • Red(Device) button : Selects a connected device. • Green(Favorites Setting) button : Changes the favorites setting for the selected photo. Press this button repeatedly until the desired value appears. (Refer to page 73) • Yellow(Select) button : Selects photos from the photo...
Page 74 - button to viewing the information.; Pre
English - 4 Deleting Multiple Photos1 Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. ➢ Repeat the above operation to select multiple photos. ➢ The mark appears to the left of the selected photo. Press the TOOLS button. Press the ▲ or ▼ button to ...
Page 75 - Viewing a Photo or Slide Show; Slide Show; : All files in the photo list will be used for the Slide Show.; Play Current Group; : Only the photos in the sorting group including the selected file; Icon
English - Viewing a Photo or Slide Show Viewing a photo1 Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to move to Photo , then press the ENTER button. ➢ Photo files are displayed. Press the ◄ or ► button to select the desired photo in the Photo l...
Page 76 - This rotates a photo to its original position
English - Using the option menu during a slide show (or Viewing a Photo)1 During a slide show(or viewing a photo), Press the TOOLS button to set the option. Press the ▲ or ▼ button to select the desired option. Then press the ENTER button. Start Slide Show (Stop Slide Show) You can start or stop a S...
Page 78 - : Plays music files of a particular mood only.
English - Background Music Setting You can set the background music. Press the ▲ or ▼ button to select Background Music Setting , then press the ENTER button. ➢ If you turn off the Background Music , even if the Background Music Settings have been set up, the background music will not be played. ➢ L...
Page 79 - Using the Music List
English - 1 Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select Music , then press the ENTER button. ➢ Music files are displayed. ➢ To select a file on the previous / next group, press the W.LINK CH LIST (REW) or W.LINK CH LIST (FF) button to...
Page 83 - Playing a Music File
English - Playing a Music File Playing a music file1 Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select Music , then press the ENTER button. Pressing the ENTER button to select a music file to be played, then press the ENTER button. ➢ This m...
Page 85 - Using the Setup Menu; Home
English - Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1 Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select the desired option. (Slide Show...
Page 86 - Connecting Anynet+ Devices; To connect to a TV; Optical Cable; Home Theater
English - Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV Connect the [HDMI IN 1], [HDMI IN 2] or [HDMI3/DVI IN] jack on the...
Page 87 - Scanning and Switching between Anynet+ Devices
English - Setting Up Anynet+ The following settings help set the Anynet+ functions. Continued... To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On1 Press the MENU button. Press the ▲ or ▼ button to select Application , then press the ENTER button. Press the ▲ or ▼ button to select An...
Page 88 - Recording; Press the ▲ or ▼ button to select a recording device and press the
English - Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet + Menu Description View TV Switches from Anynet+ to TV broadcast mode. Device List Displays the Anynet+ device list. Recording: (Device_Name) Starts a recording. (This m...
Page 89 - Listening through a Receiver (Home theater); Press the ▲ or ▼ button to select Receiver, then press the; Press the ◄ or ► button to select to; Now you can listen to sound through the receiver.; EXIT; channel sound will be heard from the Home Theater receiver.; Troubleshooting for Anynet+
English - Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker.1 Press the TOOLS button. Press the ▲ or ▼ button to select Receiver, then press the ENTER button. Press the ◄ or ► button to select to On , then press the ENTER button. Now you...
Page 91 - Replacing the Lamp; Why do I need to replace the lamp?; The lamp must be the same code number and type.; Caution; poor screen quality, electric shock or fire.; Unplug the TV, then use a screwdriver to remove the screws.
English - 1 Replacing the Lamp Why do I need to replace the lamp? ● The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. When do I need to replace it? ● It sho...
Page 92 - Cleaning and Maintaining Your TV; Placement; Using Your TV in Another Country
English - Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement ● Do not put the TV near extremely hot, cold, humid or dusty places. ● Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum...
Page 93 - Operating Temperature; This device is a Class B digital apparatus.; Technical Specifications; are subject to modification without notice.
English - Model Name HLA0C1F Screen Size (Diagonal) 72 inch (71.8 inches measured diagonally) PC Resolution 1920 x 1080 @ 60Hz Sound (Output) 10W x 2 Dimension (W x H x D) 65.8 x 20.4 x 46.8 inches (1671 x 519 x 1189 mm) Weight 104.5 lbs(47.4 Kg) Environmental Considerations Operating Temperature Op...
Page 94 - Preamble; TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
English - 4 The GNU General Public License (GPL) Version , June 11 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Prea...
Page 100 - signature of Ty Coon, 1 April 1990; This page is intentionally
English - 100 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 1. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who plac...
Page 103 - Guía para la TV Digital; Qué es la televisión digital?; en una emisión digital única.; Servicios de la televisión digital; Calidad de imagen digital; SDTV; Los formatos de programas; HDTV; Otros países; Español
Español - © 2008 Samsung Electronics Co., Ltd. All rights reserved. Guía para la TV Digital ● Qué es la televisión digital? La televisión digital (DTV) es una nueva forma de transmitir vídeo y audio de calidad al equipo de TV. Con la DTV, las emisoras pueden transmitir imágenes de TV de alta definic...
Page 104 - Preguntas y respuestas; VHF y UHF se utilizan para emisiones de DTV.; . Cuál es la dificultad de recibir señales de DTV en interiores?; programas de DTV de emisión OTA.
Español - Preguntas y respuestas 1. Es la antena que utiliza para recepción de TV lo suficientemente buena para DTV? funciona bien con muchas antenas de TV existentes. Sin embargo, las asignaciones de canales de las emisiones de DTV son diferentes que los canales analógicos. Debe descubrir si las em...
Page 105 - Índice; Símbolos; Pulse
Español - 4 Índice Información general ■ Posición de visualización ......................................... 5 ■ Características ......................................................... 5 ■ Comprobación de los componentes ......................... 6 ■ Aspecto general del panel de control .............
Page 106 - Características; las siguientes características especiales:; Conexión HDMI/DVI del PC con este televisor
Español - Información generalPosición de visualización Para conseguir la mejor calidad de visualización, siga las directrices siguientes referentes a la distancia de visualización. Siéntese lo más lejos posible de la pantalla si va a mirarla durante un período prolongado. ➢ Cuando instale el product...
Page 107 - Aspecto general del panel de control; Botones de la parte inferior derecha del panel; Comprobación de los componentes; Continúa...; Se vende por separado
Español - Aspecto general del panel de control Botones de la parte inferior derecha del panel Los botones del panel inferior derecho controlan las funciones básicas del televisor, incluido el menú en pantalla. Para utilizar las funciones más avanzadas debe usarse el mando a distancia. Comprobación d...
Page 108 - de igual modo que los botones ◄ y ► del; de igual modo que los botones ▲ y ▼ del mando a
Español - 1 SOURCE Cambia entre todas las fuentes de entrada disponibles (TV, AV1, AV2, S-Video, Componente1, Componente2, PC, HDMI1, HDMI2/DVI, HDMI3 o USB). 2 MENU Púlselo para ver un menú en pantalla con las opciones del televisor. 3 + VOL – Púlselos para subir o bajar el volumen. En el menú en p...
Page 109 - Aspecto general del panel de conexiones; Posterior del panel lateral; Conector coaxial de 75Ω para antena o red por cable.; Tomas del panel posterior
Español - Aspecto general del panel de conexiones Posterior del panel lateral Use las tomas del panel lateral para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 10~...
Page 110 - Mando a distancia; canales y WISELINK.
Español - Mando a distancia Puede utilizar el mando a una distancia de hasta metros del televisor. Al usarlo, apunte directamente al televisor. También se puede utilizar el mando a distancia para hacer funcionar el aparato de vídeo, el decodificador de cable, el reproductor de DVD y el decodificador...
Page 111 - Instalación de las pilas en el mando a distancia; Instale dos baterías de tamaño AAA.; Si el mando a distancia no funciona! efectúe estas comprobaciones; Ha habido un corte de energía o se ha desenchufado el cable?; planos dobles de 00 ohmios” a continuación.; Antenas con cables planos dobles de 00 ohmios; Conecte los dos cables de antena al combinador.
Español - 10 Instalación de las pilas en el mando a distancia 1 Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. Instale dos baterías de tamaño AAA. ➢ ● Asegúrese de respetar los extremos “+” y “–” de las pilas indicados en el diagrama del interior del ...
Page 112 - Conexión de TV por cable; Cable sin decodificador
Español - 11 Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. Cable sin decodificador 1 Enchufe el cable de entrada en el terminal ANT IN en el lateral del televisor. ➢ Dado que el TV tiene previsto el uso de televisión por cable, no se necesita un decod...
Page 113 - conexión proporciona una imagen de la mayor calidad.
Español - 1 Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de DVI Esta conexión sólo se puede realizar si hay una toma de salida de DVI en el dispositivo externo. 1 Conecte un cable HDMI/DVI o un adaptador de DVI-HDMI entre el terminal de ...
Page 115 - Conexión de un aparato de vídeo; Conexión de vídeo
Español - 14 Conexión de un aparato de vídeo Conexión de vídeo En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas 10 y 11). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable. ➢ ...
Page 117 - Puede tardar unos segundos mientras se ve una imagen en; Conexión a un PC; Uso del cable HDMI/DVI
Español - 1 FuncionamientoEncendido y apagado del televisor Pulse el botón POWER del mando a distancia. También puede usar el botón de encendido del televisor. ➢ Puede tardar unos segundos mientras se ve una imagen en pantalla completa. Uso del cable D-Sub 1 Conecte un cable D-Sub entre el terminal ...
Page 118 - Pulse el botón; Si la unidad accidentalmente se configura en el modo; pulse el botónn; pulsando los botones ◄ o ► a con
Español - 1 Continúa… Función Plug & Play La primera vez que se enciende el nuevo televisor, se debe elegir la configuración básica del idioma, fuente de entrada y canales, y la hora del día por medio de la función plug and play. El televisor almacenará esta configuración en la memoria. El hecho...
Page 119 - Configurar fechay hora catuales; Pulse los botones ◄ o ► para desplazarse por; Ajuste automático del reloj; Pulse los botones ▲ o ▼ para seleccionar
Español - 1 El televisor empezará a memorizar todos los canales disponibles. Una vez los haya guardado, volverá a aparecer el menú Prog. Auto. Pulse el botón ENTER cuando se complete la memorización de canales. Aparece el menú Modo Reloj . ➢ Para detener la búsqueda antes de que finalice, pulse el b...
Page 120 - para seleccionar; Cambio de canales
Español - 1 Si desea reiniciar esta función... 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración ; a continuación pulse el botón ENTER . Pulse el botón ENTER para seleccionar Plug & Play . Si desea más detalles sobre las opciones de configuración,...
Page 121 - Ajuste del volumen; Visualización de la Menus; Pulse losbotones ▲o ▼ para seleccionar uno de los iconos.; Visualización de la pantalla
Español - 0 Ajuste del volumen Utilización de los botones de volumen 1 Pulse los botones VOL W.LINK CH LIST o VOL W.LINK CH LIST para subir o bajar el volumen. Utilización del botón Mute Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE . 1 Pulse el botón MUTE y se corta el son...
Page 122 - Uso del botón TOOLS; Memorización de los canales
Español - 1 Uso del botón TOOLS Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú TOOLS cambia según el modo de entrada externo que se está viendo.1 Pulse el botón TOOLS . Aparece el menú TOOLS . Pulse los botones ▲ o ▼ para selec...
Page 124 - Para seleccionar la fuente; : Actualiza los dispositivos externos conectados.; Para editar el nombre de la fuente de entrada; esta manera será más fácil seleccionar el dispositivo de entrada.; Juego
Español - Continúa… Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD o receptores de cable y satélite (decodificadores), conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. 1 Pulse el botón MENU para mos...
Page 125 - Personalización de la configuración de la imagen; : Ajusta el nivel del contraste de la imagen.
Español - 4 Control de la imagenCambio del formato de la imagen Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. ➢ El televisor puede tardar unos segundos en encenderse. 1 Pulse el botón MENU para mostrar el menú. Pulse el botón ENTER para seleccionar Imagen . Pu...
Page 126 - Ajuste de la configuración detallada
Español - Ajuste de la configuración detallada Los nuevos televisores Samsung permiten una configuración más precisa de la imagen que los modelos anteriores. Consulte más adelante cómo realizar una configuración detallada. Activación de la configuración detallada 1 Pulse el botón MENU para ver el me...
Page 128 - Configuración de las opciones de la imagen
English - Activación de xvYCC Si ajusta el modo xvYCC como Encendido, se aumenta el detalle y el espacio de color mientras se ven películas desde un dispositivo externo (por ejemplo, un reproductor de DVD) conectado a los terminales HDMI o Component IN. 1 Pulse los botones ▲ o ▼ para seleccionar xvY...
Page 129 - : Aumenta el tamaño de la imagen en la pantalla.; total de la pantalla.; Sólo buscar; : Use esta función para ver la imagen completa sin cortes cuando la; O bien, puede pulsar repetidamente el botón; Fuente entrada; Ajuste ancho, Sólo buscar
English - Cambio del tamaño de la pantalla Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible ...
Page 130 - Apaga la función de la reducción del ruido de la pantalla.
English - 1: Establece la imagen en modo panorámico 16:9. Zoom1 Tamaño de pantalla cuando se amplía verticalmente el formato amplio. Zoom Tamaño de pantalla cuando se amplía verticalmente el formato Zoom1. Ajuste ancho Amplía la relación de aspecto de la imagen para que se ajuste al ancho total de l...
Page 131 - Apagado; La pantalla adquiere más brillo.
English - 0 DNIe (motor digital de imágenes naturales) Este televisor incluye la función DNIe con el fin de conseguir una gran calidad visual. Si ajusta DNIe en Encendido, podrá ver la pantalla con la función DNIe activada. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen . ...
Page 133 - : Admite tonos de color del formato sRGB.; Uso de la función D; se necesita una tarjeta gráfica que admita 3D o software 3D.; mediante los cristales de obturación de las gafas D.; Emisor de infrarrojos
English - Reducción de los efectos de una pantalla quemada Si la pantalla se ha quemado, puede seleccionar una pantalla blanca o un patrón de señal para que le ayude a retirar los elementos quemados. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen . (consulte la página 27) ...
Page 135 - Apéndice
English - 4 Utilización de los parámetros de sonido automáticos Puede seleccionar el modo de sonido que se ajuste al programa que se está viendo. 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido ; a continuación pulse el botón ENTER . Pulse el botón ENTER p...
Page 136 - Ajuste de TruSurround XT; símbolo son marcas comerciales de SRS Labs, Inc.; está incorporada bajo licencia de SRS Labs, Inc.
English - Reajuste de la configuración del ecualizador a los valores predefinidos de fábrica Pulse los botones ▲ o ▼ para seleccionar Reiniciar y, a continuación, pulse el botón ENTER . ➢ La configuración del ecualizador se restablece a la configurada de fábrica. Pulse el botón EXIT para salir. Favo...
Page 137 - Elección del idioma preferido; traducciones simultáneas del programa en otros idiomas).; : Elija para canales que emiten en estéreo.; SAP; una traducción de otro idioma.; Selección de una pista de sonido multicanal (MTS) - Analógico
English - Idioma preferido 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido ; a continuación pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Idioma preferido y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para elegir un id...
Page 138 - Control automático de volumen; Reduce las diferencias en el nivel de volumen entre las emisoras.; Encendido/apagado del altavoz del televisor; Se silencia la salida de sonido de los altavoces del televisor.
English - 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido ; a continuación pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Vol. Auto. ; a continuación pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Encendido o Apagado y, a ...
Page 139 - : Los valores actualmente configurados se restablecen con la
English - 1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Sonido y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Reinicio del sonido y, a continuación, pulse el botón ENTER . Pulse los botones ◄ o ► para seleccionar Reiniciar todo , Reinic. modo so...
Page 140 - Control de los canales; Gestión de los canales; las emisoras digitales.; : Amplía o disminuye el número del canal.
English - Control de los canales Gestión de los canales Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. Visualización de todos los canales Puede ver todos los canales que tiene disponibles. Para usar la función de...
Page 142 - Pulse el botón ◄ para seleccionar; Se mostrará el símbolo “♥“ y el canal se configurará como favorito.; favoritos y la marca “♥” desaparece.; Pulse los botones ▲/▼ para seleccionar
English - 41 Ajuste de los canales favoritos Puede configurar como favoritos los canales que vea con más frecuencia. 1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continu...
Page 144 - Botones numéricos; : Selecciónelo para cambiar la reserva de visualización.; Cancelar programaciones; : Selecciónelo para cancelar la reserva de visualización.; Información; : Selecciónelo para ver una reserva de visualización.; del mando a distancia para mostrar las listas de canales.
English - 4 Confirmación de una reserva de visualización Se puede ver, cambiar o borrar una reserva. 1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el ...
Page 145 - Etiquetado de canales analógicos; : Permite cambiar entre letras y caracteres en inglés.; Botón verde; : Permite borrar una letra o un carácter introducidos.; Botón amarillo; : Pulse este botón parar terminar el cambio del nombre del canal.; y no se pueden etiquetar.; Almacenamiento de los canales en la memoria (programa automático)
English - 44 Etiquetado de canales analógicos Los canales se pueden etiquetar con el propósito de que cuando éstos se seleccionan se pueda ver su nombre. 1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para sele...
Page 146 - Supresión de los canales codificados digitales; Para detener la búsqueda de canales codificados:; Sintonización fina de los canales analógicos
English - 4 Supresión de los canales codificados digitales La función Borrar canal encriptado se usa para filtrar los canales codificados después de realizar una búsqueda automática. Puede tardar de 0 a 0 minutos.1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuació...
Page 147 - Comprobación de la potencia de la señal digital
English - 4 Comprobación de la potencia de la señal digital A diferencia de los canales analógicos, cuya calidad de recepción puede variar desde “nebuloso” a claro, los canales digitales (HDTV) tienen una calidad de recepción perfecta o no se reciben en absoluto. Por tanto, a diferencia de los canal...
Page 149 - Ajuste del televisor con el ordenador
English - 4 Ajuste del televisor con el ordenador Cómo realizar un ajuste automáticoMediante la función de ajuste automático se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que recibe del ordenador. Esta función también ajusta automáticamente la con...
Page 150 - PC Ancho; : Los ajustes de la posición de la imagen (
English - 4 Cambio de la posición de la pantallaAjuste la posición de la pantalla del PC si no se acopla a la pantalla del televisor. ➢ Preselección: Pulse el botón ENTER para seleccionar el modo PC. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Imagen y, a continu...
Page 153 - , con el botón ► puede elegir el día de la semana. Pulse
English - Activación y desactivación del temporizadorUtilice esta función para que el televisor se encienda o apague a una hora concreta. Debe ajustar el reloj en primer lugar.1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el b...
Page 158 - TODOS; : Bloquea todas las clasificaciones de TV.; FV; ” seleccionado, pulse el botón ► para ir a una; diferente, pulse los botones ▲ o ▼ y repita el proceso.
English - 4 Aparecerá la pantalla Guías pater. TV . Pulse los botones ▲ o ▼ para seleccionar una de las seis categorías basadas en la edad: • TV-Y :Todos los niños. Los temas y elementos de este programa están diseñados específicamente para audiencia muy joven, incluidos niños de edad entre los dos ...
Page 159 - PG
English - Cómo configurar las restricciones utilizando “Clas. MPAA” (G, PG, PG-13, R, NC-1, X, NR)El sistema de clasificación MPAA utiliza el sistema de la Asociación americana de cinematografía y se aplica principalmente en las películas. Cuando el bloqueo V-Chip está activado, el televisor bloquea...
Page 163 - los botones; . En ciertas condiciones (según la clasificación de; ▼ para desactivar temporalmente la función Bloqueo V-Chip.
English - Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (“Escape de emergencia”)Si el televisor sintoniza un canal restringido, el V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el siguiente mensaje:1 Pulse el botón ENTER para seleccionar Aceptar . Para volver al modo...
Page 164 - Visión de subtítulos (mensajes de texto en pantalla) - Digital; del mando a distancia para seleccionar; Encendido
English - Visión de subtítulos (mensajes de texto en pantalla) - Digital La función digital Subtítulo funciona en canales digitales. 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ pa...
Page 165 - Visión de subtítulos (mensajes de texto en pantalla) - Analógico; Programado; para configurar los subtítulos como
English - 4 Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función Subtítulo analógico funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, la función de Subtítulos analógicos...
Page 166 - Ajuste de la melodía de encendido y apagado del televisor; Fabricado bajo licencia de Dolby Laboratories.; : Establece el volumen de la melodía en un nivel bajo.; : Establece el volumen de la melodía en un nivel medio.; Alto; : Establece el volumen de la melodía en un nivel alto.
English - 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER . Pulse el botón ENTER para seleccionar Melodía . Pulse los botones ▲ o ▼ para seleccionar Apagado , Bajo , Medio o Alto y, a continuación, pulse el bo...
Page 167 - Configuración del modo Entretenimiento; : Desactiva la función; : Proporciona una calidad óptima de imagen para los deportes.; Cine; imágenes y se resalta el sonido.; Juegos; conectada al televisor.
English - Configuración del modo Entretenimiento El modo Entretenimiento permite seleccionar la mejor visualización y el sonido óptimo para ver deportes y películas y para los juegos.1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación,...
Page 169 - POWER; del mando a distancia o del panel frontal.; pulsando el botón; Uso de los botones del mando a distancia con el menú WISELINK; Botón; Salir del modo WISELINK.
English - Esta función permite ver archivos de fotos (JPEG) y escuchar archivos de audio (MP3) guardados en un dispositivo de clase de almacenamiento masivo (MSC) USB. 1 Pulse el botón POWER del mando a distancia o del panel frontal. ➢ El televisor está encendido. Conecte un dispositivo USB que cont...
Page 170 - Pulse varias veces el botón; Pulse el botón rojo, a continuación pulse los botones ▲ o ▼ para; Domicilio
English - Uso del menú WISELINK1 Pulse el botón MENU . Pulse los botones ◄ o ► para seleccionar Aplicaciones y, a continuación, pulse el botón ENTER . Pulse los botones ▲ o ▼ para seleccionar WISELINK y, a continuación, pulse el botón ENTER . ➢ Se muestra el menú WISELINK . Pulse el botón W.LINK del...
Page 171 - Uso de la lista de fotos; JPEG se clasifican en orden alfabético.
English - 0 Uso de la lista de fotos Este menú muestra carpetas y archivos de las fotos guardadas en un dispositivo de memoria USB. Lista de fotos1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK . Pulse los botones ▲ o ▼ para seleccionar Photo y, a continuación, pulse el b...
Page 172 - Pulse los botones ◄ o ► para seleccionar
English - 1 Elementos de ayuda • Botón rojo (Dispositivo) : Selecciona el dispositivo conectado. • Botón verde (Configuración de favoritos) : Cambia la configuración de favorito de la foto seleccionada. Pulse este botón varias veces hasta que se muestre el valor que desee. • Botón amarillo (Selecció...
Page 175 - para ver la información.
English - 4 Supresión de varias fotos1 Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. A continuación pulse el botón amarillo. ➢ Repita el proceso anterior para seleccionar varias fotos. ➢ La marca ( ) aparece a la izquierda de la foto seleccionada. Pulse el botón TOOLS . Pul...
Page 176 - Visualización de una foto o una presentación; Presentación; : En la presentación se usan todos los archivos de la lista de fotos.; Reproducir grupo actual; : Sólo las fotos del grupo de clasificación que incluye el; Icono
English - Visualización de una foto o una presentación Visualización de una foto1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK . Pulse los botones ◄ o ► para ir a Foto y pulse el botón ENTER . ➢ Se muestran los archivos de fotos. Pulse los botones ◄ o ► para seleccionar ...
Page 177 - Para girar una imagen a su estado original.
English - Uso del menú de opciones durante una presentación (o la visualización de una foto) 1 Durante una presentación (o la visualización de una foto), pulse el botón TOOLS para establecer una opción. Pulse los botones ▲ o ▼ para seleccionar la opción deseada. A continuación, pulse el botón ENTER ...
Page 178 - almacenados en el dispositivo USB.
English - Ampliación Puede ampliar las imágenes en el modo de pantalla completa. Pulse los botones ▲ o ▼ para seleccionar Zoom y, a continuación, pulse el botón ENTER . Pulse los botones ◄ o ► para aumentar o reducir el efecto de la ampliación. (x1 → x2 → x4) Para mover una foto ampliada, pulse el b...
Page 179 - Aleatorio; : Los archivos de música se reproducen aleatoriamente.; Archivo seleccionado; : Reproduce un Seleccionar archivo de música.; Estado de ánimo; : Sólo se reproducen los archivos de música del estado de ánimo
English - Configuración de la música de fondo Se puede configurar la música de fondo. Pulse los botones ▲ o ▼ para seleccionar Configuración de la música de fondo y, a continuación, pulse el botón ENTER . ➢ Si se desactiva la opción Música de fondo , aunque se haya configurado Configurar música de f...
Page 180 - Pulse los botones ▲ o ▼ para cambiar la norma de; hasta que se muestre el valor que desee.; Uso de la lista de música
English - 1 Press the W.LINK button on the remote control to display the WISELINK menu. Pulse los botones ▲ o ▼ para seleccionar Música y, a continuación, pulse el botón ENTER . ➢ Se muestran los archivos de música y las carpetas existentes. ➢ Para seleccionar un archivo en el grupo anterior/siguien...
Page 184 - Reproducción de un archivo de música
English - Reproducción de un archivo de música Reproducción de un archivo de música1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK . Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER . ➢ Se muestran los archivos de música. Pulse el botón ENTER para sel...
Page 185 - : Cuando todos los archivos de música de la carpeta (o el archivo
English - 4 Reproducción de los archivos de música seleccionados1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER . Pulse los botones ◄ o ► para seleccionar el archivo de música que desee y, a continuaci...
Page 186 - Uso del menú de configuración
English - Uso del menú de configuración El menú de configuración muestra al usuario la configuración del menú WISELINK. 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER . Pulse los botones ▲ o ▼...
Page 187 - Conexión de dispositivos Anynet+; Cable óptico
English - Conexión de dispositivos Anynet+ El sistema Anynet+ sólo se puede usar con dispositivos de Samsung que tengan la función Anynet+. Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet+. Para conectar al televisor Conecte los terminales ...
Page 188 - Configuración de Anynet+; . Pulse los botones ▲ o ▼ para seleccionar; Configuración de un dispositivo Anynet+ para que se desactive; Búsqueda y cambio de dispositivos Anynet+
English - Configuración de Anynet+ Los parámetros siguientes ayudan a configurar las funciones Anynet+. Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como Encendido (On). 1 Pulse el botón MENU . Pulse los botones ▲ o ▼ para seleccionar Aplicaciones y, a continuación, pulse ...
Page 189 - Grabación; Cuando hay más de un dispositivo de grabación; botón; Seleccione
English - Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menu Anynet+ Descripción Ver TV Cambia de Anynet+ al modo de emisión de TV. Lista Disp. Muestra la lista de dispositivos de Anynet+. Grabar: (Nombre_dispositivo) Comienza una ...
Page 192 - Sustitución de la lámpara; Por qué tengo que sustituir la lámpara?; • La lámpara debe tener el mismo código y ser del mismo tipo.; Precaución; pantalla o producir descargas eléctricas o incendio.
English - 1 Sustitución de la lámpara Por qué tengo que sustituir la lámpara? La lámpara que se utiliza en el televisor DLP tiene una vida limitada. Para obtener la mejor calidad en pantalla, debe sustituirse periódicamente. Después de sustituir la lámpara, la calidad de la pantalla será más brillan...
Page 193 - • Asegúrese de que la lámpara de repuesto sea del mismo modelo.; Limpieza y mantenimiento del TV; Colocación; Coloque el TV sólo en posición vertical.; Líquidos; Nunca abra la unidad o toque las piezas del interior.; Temperatura; Uso del televisor en otro país
English - Separe la lámpara del aparato sujetando el asa y tirando hacia fuera. ➢ • Asegúrese de que la lámpara de repuesto sea del mismo modelo. • Después de sustituir la lámpara, alinee la cubierta de la lámpara con la ranura y apriete el tornillo. • El TV no se encenderá si no se cierra correctam...
Page 194 - Especificaciones técnicas
English - Nombre del modelo HLA0C1F Tamaño de pantalla (diagonal) 72 pulgadas pulgadas (71.8 pulgadas medidas diagonalmente) Resolución del PC 1920 x 1080 @ 60Hz Sonido (Salida) 10W X 2 Dimensiones (Al. x An. x Pr.) 65.8 x 20.4 x 46.8 pulgadas pulgadas (1671 x 519 x 1189 mm) Peso 104.5 lbs (47.4 Kg)...
Page 195 - Esta página se ha dejado en
English - 4 Esta página se ha dejado en blanco expresamente. BP68-00670A-01SPA.indb 94 2008-04-24 오후 3:28:56