Page 3 - A Guide to Digital TV; Digital Television Services
English - 3 A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surroundaudio, and new services such as multicasting ...
Page 4 - CableCARD and Digital Cable Ready TVs; NOTE
English - 4 CableCARD and Digital Cable Ready TVs CableCARD and Digital Cable Ready TVs are the products of a new digital cablestandard. This new standard is called OpenCable and it is a concerted effort tostandardize the digital cable service network interface in North America. For moreinformation,...
Page 6 - Ta b l e o f C o n t e n t s
Your New Wide TV ..........................................................................................10 Viewing Position ..................................................................................................10Replacing the Lamp .........................................................
Page 8 - SAMSUNG
SAMSUNG 1_BP68-00460A-01(02~17) 1/21/05 4:18 PM Page 8
Page 9 - Your New Wide TV
Your New Wide TV 1_BP68-00460A-01(02~17) 1/21/05 4:18 PM Page 9
Page 10 - Viewing Position
Your New Wide TV English - 10 Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. Replacing the Lamp • Why do I need to replace the lamp? The lamp used in a...
Page 11 - NOTES
English - 11 • For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves. 1 Unplug TV, then use a screwdriverto remove the screw as shown in the picture.(Remove the rubber cap and unscrew the screw.) 2 Remove the Lamp cover. (Exert a bit of force to the right and pu...
Page 12 - List of Features; Accessories
English - 12 List of Features Your TV was designed and engineered using the latest technology. It is a full-featured, high-performanceunit that exceeds industry standards. In addition, it has these special features: • Easy-to-operate remote control• Easy-to-use on-screen menu system you can access f...
Page 13 - Side Panel Buttons; Side Panel Jacks
English - 13 Side Panel Buttons The buttons on the right side panel control your TV’s basic features, including the on-screen menusystem. To use the more advanced features, you must use the remote control. Œ SOURCE Press to switch between viewing TV programs and signals from connected components. ´ ...
Page 14 - Front Panel LED Indicators; Indicator Light Key
Your New Wide TV English - 14 Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. Indicator Light Key : Light is On : Light is Blinking : Light is Off • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.• The T...
Page 15 - Rear Panel Jacks
English - 15 Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different componentssuch as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks andtwo sets of component video input jacks on the rear panel of your TV. Fo...
Page 17 - Installing Batteries in the Remote Control
Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performancedegradation while using the remote, the batteries may need to be replaced. Make sure you replace bothbatteries and do not mix old and new batteries in ...
Page 19 - Connections
Connections 2_BP68-00460A-01(18~31) 1/21/05 4:34 PM Page 19
Page 20 - C o n n e c t i o n s; Connecting VHF and UHF Antennas; Antennas with 300-ohm Flat Twin Leads; Antennas with 75-ohm Round Leads
English - 20 C o n n e c t i o n s Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the...
Page 21 - Separate VHF and UHF Antennas
English - 21 Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine thetwo antenna signals before connecting the antennas to the TV. This procedure requires an optionalcombiner-adaptor (available at most electronics shops). 1 Connect both ...
Page 22 - Connecting Cable TV and VCR; Cable without a Cable Box; Cable with a Cable Box that Descrambles All Channels
C o n n e c t i o n s English - 22 Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, andcable with a cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use ...
Page 23 - Connecting an Analog Cable Converter Box; Connecting an Analog Cable Converter Box and a VCR
English - 23 Connecting an Analog Cable Converter Box This connection allows you to watch cable and premium channels. You should keep your TVselected to “Cable IN” so that you can use the TV features. When viewing premium channels,select “Air IN” and tune the TV to channel 3 or 4 (whichever channel ...
Page 24 - Connecting CableCARD
Connecting CableCARD You must obtain a CableCARD from a local cable service provider. 1 Insert the CableCARD into the “CableCARD” slot andthe message “CableCARD TM Inserted” is displayed onthe screen. If the channelinformation does notalready exist, the message“Updating Channel List” isdisplayed dur...
Page 25 - Connecting a Camcorder
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV.You can use your camcorder to view tapes without using a VCR. 1 Locate the A/V output jacks on the camcorder. They areusually found on the side orback of the camcorder. 2 Connect a set of audio cabl...
Page 26 - Connecting a DVD Player; Connecting to Audio and Video Jacks
C o n n e c t i o n s English - 26 Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, P B , P R 1 Connect a set of audio cables between theCOMPONENT (1 or 2)AUDIO (L, R) IN jacks onthe TV and the AUDIO OUTjacks on the DVD player....
Page 27 - Connecting a DTV Set-Top Box; Connecting to DVI (Digital Visual Interface)
Connecting a DTV Set-Top Box Connecting to Y, P B , P R 1 Connect a set of audio cables between theCOMPONENT (1 or 2)AUDIO (L, R) IN jacks onthe TV and the AUDIO OUTjacks on the Set-Top Box. 2 Connect a set of video cables between theCOMPONENT (1 or 2)VIDEO (Y, P B , P R ) IN jacks on the TV and VID...
Page 28 - Connecting to HDMI (High Definition Multimedia Interface)
English - 28 C o n n e c t i o n s Connecting to HDMI (High Definition Multimedia Interface) 1 Connect an HDMI cable between the HDMI/DVI INjack on the TV and the HDMIOUT jack on the Set-Top Box. NOTE • Make sure the HDMI/DVI source's power is on, or youwill be unable to select it in themenu's sourc...
Page 29 - Connecting a Digital Audio System; Connecting to an Analog Amplifier
English - 29 Connecting a Digital Audio System There are many types of digital audio systems on the market today.A simplified illustration of an audio system is shown below. For more information, see youraudio system owner’s manual. 1 If your audio system has a optical digital audio input,connect to...
Page 31 - Operation
Operation 2_BP68-00460A-01(18~31) 1/21/05 4:34 PM Page 31
Page 32 - Viewing the Menus; Viewing the Display; O p e r a t i o n; Turning the TV On and Off
Viewing the Menus 1 Press the MENU button.The main menu is displayed.There are six menu groups:“Input”, “Picture”, “Sound”,“Channel”, “Setup”, and“Guide”. 2 Press the … or † button to select an item you want in the menu. Press the œ , √ or ENTER button to display, change, or use the selected items.U...
Page 33 - Selecting a Menu Language
English - 33 Selecting a Menu Language 1 Press the MENU button.Press the … or † button to select “Setup”, then press theENTER button. 2 Press the ENTER button toselect “Language”.Press the … or † button to select “English”, “Español”or “Français”, then press theENTER button. Press the EXIT button to...
Page 34 - Memorizing the Channels; Selecting the Video Signal Source
O p e r a t i o n English - 34 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) andcable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change c...
Page 36 - Adding and Erasing Channels
English - 36 O p e r a t i o n Adding and Erasing Channels You can add channels that were not memorized (or delete unwanted channels from memory). 1 Press the MENU button.Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to select “Add/Delete”, thenpr...
Page 37 - Changing Channels; Using the Channel Buttons
English - 37 Changing Channels Using the Channel Buttons When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not mem...
Page 38 - Customizing Your Remote Control
O p e r a t i o n English - 38 Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, theuniversal remote control can also operate a VCR, Cable box, DVD, and Samsung Set-Top Box(even if your VCR, Cable box and DVD are made by manufa...
Page 39 - Remote Control Codes; VCR Codes
English - 39 Remote Control Codes VCR Codes DVD Codes Cable Box Codes 3_BP68-00460A-01(32~53) 1/21/05 4:35 PM Page 39
Page 40 - Setting the Clock; Option 1: Setting the Clock Manually
English - 40 O p e r a t i o n Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also,you can check the time while watching the TV. (Just press the INFO button.) 1 Press the MENU button. Press the … or † button to select “Setup”, then press the EN...
Page 41 - Option 2: Setting the Clock Automatically
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. 2 Press the … or † button to select “Time”, then press the ENTER button.Press the ENTER...
Page 42 - Setting the On/Off Timer
O p e r a t i o n English - 42 Setting the On/Off Timer 1 Press the MENU button. Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “Time”, then press theENTER button.Press the … or † button to select “On Timer”, thenpress the ENTER button.Pres...
Page 43 - Setting the Sleep Timer; Alternate method
English - 43 Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “Time”, then press theENTER button.Pres...
Page 44 - Viewing an External Signal Source; Setting the Signal Source
English - 44 O p e r a t i o n Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment,such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button.Press the ENTER button toselect ...
Page 45 - Assigning Names to External Input Mode
English - 45 Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button.Press the ENTER button toselect “Input”. 2 Press the … or † button to to select “Edit Name”, thenpress the ENTER button. 3 Press the … or † button to sele...
Page 47 - Channel Control
Channel Control 3_BP68-00460A-01(32~53) 1/21/05 4:35 PM Page 47
Page 48 - C h a n n e l C o n t r o l; Selecting Your Favorite Channels; To Store Your Favorite Channels:; To View Your Favorite Channels:
English - 48 C h a n n e l C o n t r o l Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CHbutton on the remote control. To Store Yo...
Page 49 - Labeling the Channels
English - 49 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”,“PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or ablank. When the INFO button is pressed, the channel label will appear belo...
Page 50 - Fine Tuning Analog Channels; Analog
English - 50 C h a n n e l C o n t r o l Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button.Press the … or † button to select “Channel”, then pressthe ENTER button. 2 Press the … or † button to select “Fine Tune”, then p...
Page 51 - Checking the Digital-Signal Strength; Digital
English - 51 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV)channels have either perfect reception quality or you will not receive them at all. So, unlike analogchannels, you cannot fine tune a digital channel.You...
Page 53 - Picture Control
Picture Control 3_BP68-00460A-01(32~53) 1/21/05 4:35 PM Page 53
Page 54 - P i c t u r e C o n t r o l; Customizing the Picture
English - 54 P i c t u r e C o n t r o l Picture Control You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”and “Tint” according to personal preference. (Alternatively, you can use one of the automaticsettings. See next page.) Customizing the Picture 1 Press ...
Page 55 - Using Automatic Picture Settings
English - 55 Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”)that are preset at the factory. You can select “Standard” which automaticallyrecalls your personalized picture settings. 1 Press the MENU button. Press the … or † button to select...
Page 56 - Selecting the Color Tone
English - 56 P i c t u r e C o n t r o l Selecting the Color Tone 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “Color Tone”, thenpress the ENTER button. 3 Press the … or † button to select “Cool2”, “Cool1”,“Norma...
Page 57 - Changing the Picture Size
Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. English - 57 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button.Press the … or † button to select “Size”, then press theENTER button. 2 Press th...
Page 58 - Digital Noise Reduction
Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reductionfeature to help reduce any static and ghosting that may appear on the screen. English - 58 P i c t u r e C o n t r o l 1 Press the MENU button.Press the … or † button to select “P...
Page 60 - Setting the My Color Control Mode; Using the Easy Control Menu
O p e r a t i o n Setting the My Color Control Mode My Color Control allows users to adjust colors according to their preferences, by adjusting skin,sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and“Custom”) without affecting other colors on the screen. Usi...
Page 62 - Using the Color Weakness Enhancement Feature
English - 62 P i c t u r e C o n t r o l Using the Color Weakness Enhancement Feature This feature adjusts the Red, Green or Blue color to enhance the picture according to the user'sparticular color weakness. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER butt...
Page 63 - Setting the Film Mode
English - 63 Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture foroptimum quality. 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “Film Mode”, thenpr...
Page 64 - Activating the PIP
English - 64 P i c t u r e C o n t r o l Viewing Picture-In-Picture One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIPsystem allows you to watch two different pictures at once, even if you don’t have a VCR or DVDconnected to your TV. Activating the PIP...
Page 65 - Selecting an External Source
English - 65 Selecting an External Source You can use PIP to view a signal from an external source, such as a VCR. 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “PIP”, then press theENTER button. 3 Press the … or ...
Page 66 - Swapping the Sub Picture and Main Picture
English - 66 P i c t u r e C o n t r o l Swapping the Sub Picture and Main Picture 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “PIP”, then press theENTER button. 3 Press the … or † button to select “Swap”, then ...
Page 67 - Changing the Size of the Sub Picture
English - 67 Changing the Size of the Sub Picture 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “PIP”, then press theENTER button. 3 Press the … or † button to select “Size”, then press theENTER button. Press the ...
Page 68 - Changing the Location of the Sub Picture
English - 68 P i c t u r e C o n t r o l Changing the Location of the Sub Picture 1 Press the MENU button.Press the … or † button to select “Picture”, then pressthe ENTER button. 2 Press the … or † button to select “PIP”, then press theENTER button. 3 Press the … or † button to select “Position”, th...
Page 70 - Selecting the Sound Source
English - 70 P i c t u r e C o n t r o l Selecting the Sound Source You can use this feature to hear sound from the main or sub (PIP) picture. 1 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. 2 Press the … or † button to select “Sound Select”, then pre...
Page 71 - Freezing the Picture
English - 71 Freezing the Picture Press the STILL button to freeze a moving picture. (Normal soundwill still be heard.) Press again to cancel. NOTE • In the PIP mode, the main and sub pictures are stilled at the same time. 4_BP68-00460A-01(54~73) 1/21/05 4:38 PM Page 71
Page 72 - Setting the Blue Screen Mode
English - 72 P i c t u r e C o n t r o l Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces thenoisy picture background. If you wish to continue viewing the poor picture, you must set the “BlueScreen” mode to “Off”. 1 Press th...
Page 73 - Sound Control
Sound Control 4_BP68-00460A-01(54~73) 1/21/05 4:38 PM Page 73
Page 74 - S o u n d C o n t r o l; Adjusting the Volume
English - 74 S o u n d C o n t r o l Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– button to increase or decrease thevolume. Using the MUTE Button At any time, you can temporarilycut off the so...
Page 75 - Using Automatic Sound Settings
English - 75 3 Press the œ or √ button to select a particular item to be changed.Press the … or † button to increase or decrease the selected frequency. Press the EXIT button to exit. Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) tha...
Page 76 - Setting the SRS TSXT
English - 76 S o u n d C o n t r o l Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. Trusurround delivers a compelling, virtual surround sound experiencethrough any two-speaker playback system, including i...
Page 80 - Choosing a Digital Sound Format
English - 80 S o u n d C o n t r o l Choosing a Digital Sound Format Digital sound can be output from the rear-panel connector on your TV. The digital soundoutput is an optical connector labeled “Optical Out”. After connecting an optical digital-audiocomponent, you must specify the transmission form...
Page 81 - Selecting the Internal Mute
English - 81 Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can setInternal Mute to On to cut off sound from the TV's internal speakers 1 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. 2 ...
Page 82 - Setting the On/Off Melody
English - 82 S o u n d C o n t r o l Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. 2 Press the … or † button to select “Melody”, then press the ENTER bu...
Page 83 - Special Features
Special Features 5_BP68-00460A-01(74~83) 1/21/05 4:42 PM Page 83
Page 84 - S p e c i a l F e a t u r e s; Setting the Function Help
S p e c i a l F e a t u r e s English - 84 Setting the Function Help Displays Help on the menu functions. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “Function Help”, thenpress the ENTER button. 3 Press the … or †...
Page 85 - Menu Transparency Level
English - 85 Menu Transparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “Menu Transparency”,then press the ENTER button.Press the … or † button to select level...
Page 86 - How to Change Your Password
S p e c i a l F e a t u r e s English - 86 Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that isdefined by the user). The on-screen menu will instruct you to assign a password (you can changeit later, if necessary). How to Change Your Passw...
Page 87 - How to Enable/Disable the Rating Controls
English - 87 How to Enable/Disable the Rating Controls 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button.Press the … or † button to select “V-Chip”, then pressthe ENTER button. 2 Press the number buttons toenter your current 4-digit pinnumber.(The default ...
Page 88 - How to Set up Restrictions Using the “TV Parental Guidelines”
English - 88 S p e c i a l F e a t u r e s How to Set up Restrictions Using the “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines”or “MPAA Rating”. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe...
Page 90 - How to Set up Restrictions Using the “MPAA Rating”
English - 90 S p e c i a l F e a t u r e s How to Set up Restrictions Using the “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and itsmain application is for movies.When the rating control is on, the TV will automatically block any programs that...
Page 91 - Important Notes About Parental Locks
English - 91 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program maycontain mature themes, profane language,graphic violence and explicit sexual content. TV-14 Parents strongly cautioned. This ...
Page 96 - Using the CableCARD; Displaying CableCARD related information
English - 96 S p e c i a l F e a t u r e s Using the CableCARD This menu works with a CableCARD provided by a local cable service provider.Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV.For detailed connection instructions refer to the “Connecting CableCARD...
Page 97 - Using the CableCARD Setup Function; CableCARD Reset
English - 97 Using the CableCARD Setup Function Sets up relevant CableCARD options. CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not available. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to ...
Page 98 - Channel List Reorganization
English - 98 S p e c i a l F e a t u r e s Channel List Reorganization Deletes and reorganizes the channel list provided by CableCARD. 1 Press the MENU button.Press the … or † button to select “Setup”, then pressthe ENTER button. 2 Press the … or † button to select “CableCARD TM Setup”, then press t...
Page 99 - Using the Guide
Using the Guide You can display a list of all channels or your favorite channels. 1 Press the MENU button.Press the … or † button to select “Guide”, then pressthe ENTER button. 2 Press the … or † button to select “Channel List” or“Favorite Channel List”, thenpress the ENTER button. To toggle between...
Page 101 - Appendix
English - 101 Appendix 6_BP68-00460A-01(84~103) 1/21/05 4:45 PM Page 101
Page 102 - Troubleshooting; A p p e n d i x; Possible Solution; Problem
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none ofthese troubleshooting tips apply, then call your nearest Samsung authorized service center. English - 102 A p p e n d i x Possible Solution Try another channel.Adjust the antenna.Chec...
Page 103 - Cleaning and Maintaining Your TV; Placement; Using Your TV in Another Country
Cleaning and Maintaining Your TV With proper care, your TV will give you many years of service. Please follow these guidelines toget the maximum performance from your TV. Placement • Do not put the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric...
Page 104 - DLPTV
1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201Mount Arlington, NJ 07856www.samsung.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3www.samsung.ca BP68-00460A-01 DLPTV 0_BP68-00460A-01(c...
