Samsung HG43RU750EB - Installation Manual

07 Using a TV Viewing Card (“CI or CI+ Card”) Connecting the “CI or CI+ Card” via COMMON INTERFACE slot with the CI CARD Adapter ---------------------------------------------------------------------------- 29 Using the “CI or CI+ Card” ----------------------------------------------------------------...

01 What's in the Box? Make sure the following items are included with your TV. If any items are missing, contact your dealer. x 4 Remote Control & Batteries (AAA x 2) (Not available in some locations) Power Cord Warranty Card / Quick Setup Guide / Regulatory Guide (Not available in some location...

Installing the LED TV Stand Assembling the Stand and Components When installing the stand, use the provided components and parts. x 4 (M4 x L14) Stand Screws 1 L R • Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the table surface. • I...

Installing the wall mount kit You can mount the TV on the wall using a wall mount kit (sold separately). TV TV Wall mount bracket Wall mount bracket C C Wall mount Adapter Wall mount Adapter • The Product shape may differ depending on the model. The wall mount kit (sold separately) allows you to mou...

Securing the TV to the Wall Caution : Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the...

Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe person...

Providing proper ventilation for your TV When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an ...

02 The Remote Control About the Buttons on the Remote Control • The images, buttons, and functions of the remote control may differ depending on the model. • The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by visually impaired persons. • If you...

Installing batteries into the remote control (Battery size: AAA) Match the polarities of the batteries to the symbols on the battery compartment. 2 3 1 • The colour and shape of the remote may vary depending on the model. • Use the remote control within 7 m of the TV. • Bright lights may affect the ...

03 Controlling external devices with a remote control - Using the Universal Remote You can control external devices connected to the TV using a remote control. To control external devices, register them by following instructions. • The images on your TV may differ from the images accompanying the in...

Cable or Satellite Control Test This test will check if your Samsung remote can cotrol your cable or satellite box. During the test, point your remote at your cable or satellite box. Please check the cable connections, and make sure your devices are turned on. Did the channel change? Channel Up Chan...

Downloading the Universal Remote icon 1. Store the following files in the root directory of your USB device: File name File type File Size App tile stb_app_icon Jpg, png 245 x 135, 2MB Source icon stb_source_icon Jpg, png 135 x 135, 2MB Sources stb_source_icon.jpg stb_app_icon.jpg Source TV Remote A...

04 Initial Setup When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV's basic settings to suit your viewing environment.If you already completed the Initial Setup, run the Initial Setup again using ...

Using the TV Controller You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu . The Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its usage, refer to the figure below. • The screen ma...

05 The Connection Panel ➄ ➆ ➅ TV Rear Panel • When connecting an external device, match the colour of the connection port to the cable. • Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ① DIGITAL AUDIO OUT (OPTICAL) Connects to a Digit...

③ HDMI IN 1 , 2 , 3 (ARC) Connects to the HDMI port of a device with an HDMI output. – No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video. – It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with thi...

06 Connections Connecting to your Internet network You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. • After you have physically connected the TV to your network, you must configure the network connectio...

Network Security Protocols The TV only supports the following wireless network security protocols: • Authentication Modes: WEP, WPAPSK, WPA2PSK • Encryption Types: WEP, TKIP, AES In compliance with the Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in ...

Connecting the TV to a SBB or STB ETH MODEM TV Rear Panel STB (SBB) Data Cable Connect the DATA port of the TV to the ETH MODEM port of the STB (SBB) with the Data cable. • The ETH MODEM port name that you connect the Data Cable to may differ depending on the SBB or STB type. • IR signals sent by th...

List of Hospitality SI Vendors and compatible data cables supplied with the TV • Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. • Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. 1 6 1 2 3 4 5 Co...

07 Using a TV Viewing Card (“CI or CI+ Card”) Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot. – The 2 CI card slots may not be supported depending on the model. – Turn the TV off to connect or disconnect a “CI or CI+ Card”. – The “CI or CI+ ...

Using the “CI or CI+ Card” To watch paid channels, the “CI or CI+ CARD” must be inserted. • Samsung TV follow up CI+ 1.4 standard. When Samsung TV product display the pop-up message, it may happen due to CI+ 1.4 Version inconsistency. If you have a problem, please contact Samsung Call Centre. – Your...

08 Setting the Admin Menu To access the Admin menu , press the following buttons on the remote control: 1. Press the MUTE button. 2. Press the 1 button. 3. Press the 1 button. 4. Press the 9 button. 5. Press the Select E button. To control the TV functions in the Admin menu , the TV has two modes, t...

Admin menu items To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then turn on again. Any changes you made are saved. • The menu items may not be supported depending on the models. Admin menu Item Description Hospitality Mode Select ...

Admin menu Item Description System System Manager Gives you direct, immediate access to System Manager functions such as Time , Language , Change PIN . System Manager allow you to adjust your TV's system and customise settings for your viewing environment. OTN Update Lets you upgrade the TV Software...

USB Cloning O Admin menu > Cloning The USB cloning function lets you download user-configured settings ( Picture , Sound , Broadcasting , Admin menu and so on) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of...

Settings Cloned in the Admin menu • The menu items may not be supported depending on the models. Menu Item Sub Item Cloned or not Hospitality Mode Standalone / Interactive Yes SI Vendor Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / IBahn / Magilink ...

Setting Auto Initialize O Admin menu > Cloning > Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture , Sound , Broadcasting , Admin menu and so on. This lets you set nearly all of the menu values on yo...

Updating the TV’s Software DO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically after completing the software update. Video and audio settings will be reset to their defaults after a software update. We recommend you clone the TV's settings so that y...

09 Editing Channels Using Channel Editor O Admin menu > Channel > Channel Editor Using Channel Editor you can edit the channels stored in the TV's memory. • Change the channel numbers and names, edit the channel language and channel genre and delete channels. • If you set the Screen Off functi...

Assigning the Channel Number to the external device The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below. > 1. Select a external device source on the Channel Edit screen. 2. Use the directional buttons on the remote control, move the focus ...

10 Specifications and Other Information Specifications Model Name HG43RU750E HG50RU750E Display Resolution 3840 x 2160 3840 x 2160 Screen SizeMeasured Diagonally 43 inches 108 cm 50 inches 125 cm Sound (Output) 20 W 20 W Dimensions (W x H x D)BodyWith stand 970.2 x 563.2 x 58.2 mm 970.2 x 636.3 x 21...

Model Name HG75RU750E Display Resolution 3840 x 2160 Screen SizeMeasured Diagonally 75 inches 189 cm Sound (Output) 20 W Dimensions (W x H x D)BodyWith stand 1684.6 x 966.4 x 60.1 mm 1684.6 x 1056.5 x 356.1 mm WeightWithout StandWith Stand 37.0 kg37.5 kg Environmental Considerations Operating Temper...

Supported Resolutions for UHD Input Signals • Resolution: 3840 x 2160p, 4096 x 2160p If Input Signal Plus is set to Off Frame rate (fps) Colour Depth / Chroma Sampling RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 50 / 60 8 bit - - - O If Input Signal Plus is set to On Frame rate (fps) Colour Depth ...

Supported Resolutions for Video Signals Check the resolutions supported for video signals. Mode Resolution Display format Horizontal frequency (KHz) Vertical frequency (Hz) Clock frequency (MHz) Polarity (horizontal / vertical) CTA-861 720 (1440) x 576i 50 Hz 15.625 50.000 27.000 - / - 720 (1440) x ...

Read Before Using the Internet Function Read this information before using the Internet function. • File download is not supported. • The Internet function may not be able to access certain websites, including websites operated by certain companies. • The TV does not support playback of flash videos...

Dimensions Front view / Side view The displayed image may differ from your TV, depending on the model. • 43˝ (Unit: mm) 943.2 970.2 58.2 210.3 531.4 563.2 636.3 • 50˝ (Unit: mm) 1097.8 1124.8 59.1 261.3 618.4 650.2 728.8 English - 53

Licences Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWI...