Samsung DW60A8050U1 - Repair Manual

Table of Contents:

• Page 2 – IMPORTANT SAFETY NOTICE; WARNING; interior racks and plastic peripherals such as baskets and lids.
• Page 3 – Disassembly and Reassembly _ 3; TOOLS FOR REMOVAL AND REASSEMBLY; Tool image; Adjustable Wrench; NOTE; Preparation for parts replacement; You must turn off the circuit breaker connected to the product.
• Page 4 – _ Disassembly and Reassembly; STANDARD DISASSEMBLY DRAWINGS; Caution; → There is a risk of water spill on the floor.
• Page 5 – Disassembly and Reassembly _ 5; Part; CAP CASE; Remove 3 screws that connect left SIDE PANEL to; In case of Free Standing models, there’re no; Guide Tub Top; Remove 1 screw at the left side of GUIDE TUB TOP.
• Page 6 – _ Disassembly and Reassembly; Take off the CAP CASE BRAKE by rotating in a; CAUTION; Fresh Tank; Remove 1 screw from the FRESH TANK assembly.; Remove the GASKET BRAKE from the FRESH; Gasket brake
• Page 7 – Disassembly and Reassembly _ 7; Fit the GASKET BRAKE on the FRESH TANK, and; fasten the CAP CASE BRAKE by rotating in a; Assemble the left SIDE PANEL with the screws.
• Page 8 – _ Disassembly and Reassembly; RECYCLE; Remove 3 screws that connect right SIDE PANEL; Remove 3 screws at the back side of dishwasher.
• Page 9 – Disassembly and Reassembly _ 9; Remove the DUCT DRY NUT by rotating in a; Recycle Tank; Remove 1 screw from the RECYCLE TANK; Remove the GASKET BRAKE from the RECYCLE; Duct Dry Nut
• Page 10 – 0 _ Disassembly and Reassembly; Fit the GASKET BRAKE on the RECYCLE TANK,; fasten the DUCT DRY NUT by rotating in a; Wear gloves with friction and tighten firmly.
• Page 11 – Disassembly and Reassembly _ 11
• Page 12 – 2 _ Disassembly and Reassembly; Take off the CAP CASE BRAKE by rotating to; Remove the GASKET BRAKE from the CASE
• Page 13 – Disassembly and Reassembly _ 13; CONTROL; Remove 10 screws that connect the ASSY; Remove the wire harness that connect MAIN PBA
• Page 14 – 4 _ Disassembly and Reassembly; Connect wire terminal to connect MAIN PBA to; Fix 10 screws to connect the ASSY CONTROL
• Page 15 – Disassembly and Reassembly _ 15; It doesn’t need to uninstall the dishwasher from the; Remove 8 screws that connect the ASSY; SUB PBA; Remove wire connector that connect MAIN PBA to
• Page 16 – 6 _ Disassembly and Reassembly; Connect the Wire harness that connect MAIN PBA; Fix 8 screws to connect the ASSY CONTROL
• Page 17 – Disassembly and Reassembly _ 17; Open the dishwasher’s DOOR, and remove 8
• Page 18 – 8 _ Disassembly and Reassembly; Assemble the holes of DOOR OUTER to hooks of; Fasten 8 screws to fix the DOOR OUTER.
• Page 19 – Disassembly and Reassembly _ 19; Remove HOLDER ROPE DOOR from the DOOR; Remove HOLDER HINGE from the DOOR HINGE.; Rotate the HOLDER HINGE to release from hook.
• Page 20 – 0 _ Disassembly and Reassembly; Hook; CONTROL PANEL and SIDE PANEL left & right.; Pay attention to hook of terminals.; Push both ribs of GUIDE HINGE to pull out the DOOR.
• Page 21 – Disassembly and Reassembly _ 21; Do same work at the opposite side, and pull out the; Remove 2 screws to take off BRACKET DOOR; Remove 2 screw at each side to take off DOOR
• Page 22 – 2 _ Disassembly and Reassembly
• Page 23 – Disassembly and Reassembly _ 23; Remove 8 screws that connect the ASSY
• Page 24 – 4 _ Disassembly and Reassembly; Open the door to apply tension to the DOOR
• Page 25 – Disassembly and Reassembly _ 25; Remove the ASSY HINGE RIGHT hanging from; Assemble by hanging the hook of ASSY HINGE
• Page 26 – 6 _ Disassembly and Reassembly; Assemble the stopper by pushing it by hand.; Fasten the 2 screws on the side of the INNER
• Page 27 – Disassembly and Reassembly _ 27; Fasten 10 screws to fix the DOOR OUTER and
• Page 28 – 8 _ Disassembly and Reassembly; Seal tub packing; Seal tip faces; Put some water on new SEAL TUB PACKING to; Assemble the SEAL TUB PACKING to center of the
• Page 29 – Disassembly and Reassembly _ 29; Press the seal from the top corner toward remaining
• Page 30 – 0 _ Disassembly and Reassembly; Turn the COARSE FILTER counter-clockwise to
• Page 31 – Disassembly and Reassembly _ 31; Sump; Put the HOLDER ROTOR LOWER on the SUMP.; Assemble the ASSY DUCT NOZZLE to hooks and
• Page 32 – 2 _ Disassembly and Reassembly; Fasten 2 screws to fit the ASSY DUCT NOZZLE.
• Page 33 – Disassembly and Reassembly _ 33; Open the dishwasher’s DOOR, and take off the; Be careful not to be broken the hooks.; To disassemble the ROTOR MIDDLE only, loosen
• Page 34 – 4 _ Disassembly and Reassembly; Turn the COARSE FILTER counter-clockwise to; Make sure to direction of MICRO FILTER when; A loose cover can reduce the filtering
• Page 35 – Disassembly and Reassembly _ 35; Lift up the BASKET 3RD TRAY and separate it.; Release the hook of ASSY ROLLER 3RD fixed to
• Page 36 – 6 _ Disassembly and Reassembly
• Page 37 – Disassembly and Reassembly _ 37; Remove the HANDLE BASKET by lifting the 2 RIB.; Release the 2 HOLDER TINE-UP hooks and
• Page 38 – 8 _ Disassembly and Reassembly
• Page 39 – Disassembly and Reassembly _ 39; Release the hook to remove HOLDER WIRE L/R
• Page 40 – 0 _ Disassembly and Reassembly; Take off the HOLDER RAIL REAR by pulling back; Put the RAIL BASKET on the ROLLER RAIL.; Assemble the HOLDER RAIL REAR to RAIL
• Page 41 – Disassembly and Reassembly _ 41; SVC COVER PLINTH; Release the holder of COVER PLINTH slightly from; Insert the COVER PLINTH inside the holder.
• Page 42 – 2 _ Disassembly and Reassembly; SVC TOP COVER; Pull the COVER TOP backward to release hooks,; Put the COVER TOP on the top of dishwasher, and
• Page 43 – Disassembly and Reassembly _ 43
• Page 44 – 4 _ Disassembly and Reassembly; Take the SIDE PANEL off a little, just enough not to; Pull the SIDE PANEL off from the COVER PLINTH.; They are not fixed without SIDE PANEL.
• Page 45 – Disassembly and Reassembly _ 45; Put the hook of SIDE PANEL into the COVER; Make sure to fit the SIDE PANEL correctly.
• Page 46 – 6 _ Disassembly and Reassembly; Put the COVER TOP on the top of dishwasher, and
• Page 47 – Disassembly and Reassembly _ 47; Disassemble the SIDE PANEL left & right from
• Page 48 – 8 _ Disassembly and Reassembly; Assemble the GUIDE TUB TOP and COVER TUB
• Page 49 – Disassembly and Reassembly _ 49; CHECKPOINTS AFTER FINISHING A SERVICE; Check whether the dishwasher is level.
• Page 50 – Asia