Page 2 - Safety instructions; WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS; Important safety symbols
2_ Safety instructions Safety instructions Congratulations on your new Samsung dishwasher. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your dishwasher’s many benefits and features. WHAT...
Page 3 - Important safety precautions; INSTRUCTION ABOUT THE WEEE MARK
Safety instructions _3 Important safety precautions This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before usin...
Page 4 - INSTRUCTIONS WHEN USING YOUR DISHWASHER; INSTRUCTIONS FOR PROTECTING YOUR CHILDREN
4_ Safety instructions INSTRUCTIONS WHEN USING YOUR DISHWASHER This dishwasher is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments such as: • Shops • Offices and showrooms and by residents in establishments such as: • ...
Page 5 - INSTRUCTIONS FOR INSTALLING YOUR DISHWASHER
Safety instructions _5 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and underst...
Page 7 - Contents
Contents _7 PREPARING THE DISHWASHER ENCLOSURE 8 8 Product and enclosure dimensions BEFORE INSTALLING YOUR DISHWASHER 9 9 Checking the parts and tools INSTALLING YOUR DISHWASHER 11 11 STEP 1. Selecting the best location for the dishwasher 12 STEP 2. Checking water supply and electrical requirements ...
Page 8 - Preparing the dishwasher; PRODUCT AND ENCLOSURE DIMENSIONS
8_ Preparing the dishwasher enclosure Preparing the dishwasher enclosure PRODUCT AND ENCLOSURE DIMENSIONS This dishwasher is designed to be enclosed on the top and on both sides by a standard residential kitchen cabinet unit.The installation enclosure must be clean and free of any obstructions.The e...
Page 9 - Before installing your; CHECKING THE PARTS AND TOOLS; Parts required
Before installing your dishwasher _9 02 BEFORE IN S TALLING Before installing your dishwasher CHECKING THE PARTS AND TOOLS Before starting on the installation, prepare all the necessary tools and parts required to install the dishwasher. This will save installation time and simplify the installation...
Page 11 - Installing your dishwasher; STEP 1. SELECTING THE BEST LOCATION FOR THE
Installing your dishwasher _11 03 INS TALLING Installing your dishwasher Be sure that you or your installer follow these instructions closely so that your new dishwasher works properly and that you’re not at risk of injury when washing dishes. New installation If the dishwasher is a new installation...
Page 12 - STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
12_ Installing your dishwasher STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL REQUIREMENTS • The water supply line pressure must be between 0.05 ~ 0.8 MPa. • Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C. • Use a rated power of 220 ~ 240 V/50 Hz. • Install the prod...
Page 13 - STEP 3. PREPARING THE CUSTOM PANEL
Installing your dishwasher _13 03 INS TALLING STEP 3. PREPARING THE CUSTOM PANEL 4 1 4 1 Ø 2 Ø 2 ~12 ~12 1. Place the supplied installation manual at the back of the custom panel (to be attached to the door of the product) to be installed and temporarily fix it using transparent tape. • The top part...
Page 14 - STEP 4. INSTALLING THE CUSTOM PANEL
14_ Installing your dishwasher STEP 4. INSTALLING THE CUSTOM PANEL 7 2-1 2-2 3 1. Install the supplied rubber skirt by inserting it into the 3 holes at the bottom of the door. 2. Install the custom panel prepared in STEP 3 to the door of the product. 1) Push part 1 assembled in STEP 3 into the hole ...
Page 16 - STEP 5. PREPARING THE DISHWASHER
16_ Installing your dishwasher STEP 5. PREPARING THE DISHWASHER 2 1. Hook the installation brackets 2 into the holes as shown in the figure above. When you fix the product at the sides instead of fixing it at the top, you do not need to use the installation brackets. In this case, please refer to ST...
Page 18 - STEP 6. LEVELING THE DISHWASHER
18_ Installing your dishwasher STEP 6. LEVELING THE DISHWASHER 3 0 ~ 60 mm Min. 4 mm 4 2 1. Push half the product into the space under the sink and make sure that the product is level using the leveler. If you put the entire product under the sink, you cannot adjust the legs at both ends of the bott...
Page 19 - STEP 7. SECURING THE DISHWASHER
Installing your dishwasher _19 03 INS TALLING STEP 7. SECURING THE DISHWASHER A. When the product is fixed to the counter top (when the material of the counter top is ideal for drilling) Ø 2 ~12 3 1. Insert the product into the place under the counter top completely. 2. Pre-drill the overlapping hol...
Page 21 - STEP 8. CONNECTING THE DRAIN HOSE
Installing your dishwasher _21 03 INS TALLING STEP 8. CONNECTING THE DRAIN HOSE 3 3 Min. 30 cm Max. 80 cm Max. 80 cm 1. Remove the hose holder which is attached to the product and cut off part of the holder as shown in the figure. 2. Discard the part you have just cut off and use only the part that ...
Page 22 - STEP 9. COMPLETING THE INSTALLATION
22_ Installing your dishwasher STEP 9. COMPLETING THE INSTALLATION 1. Open the door and remove all foam, paper packaging, and unnecessary parts. 2. Turn on the circuit breaker you turned off before you began the installation. 3. Open the water supply valve to supply water to the dishwasher. 4. Turn ...
Page 23 - Specifications; SPECIFICATIONS
Specifications _23 04 SPECIFIC ATIONS Specifications SPECIFICATIONS MODEL DW-BG97 / DW-BG77 / DW-BG58 / DW-BG57 Series Power supply 220 ~ 240 V, 50 Hz AC only Water pressure 0.05 ~ 0.8 MPa Dimensions (Width×Height×Depth) 598 mm (W) X 817 mm (H) X 555 mm (D) Nominal inlet water temperature 15 ˚C (max...
Page 24 - REFERENCE FOR STANDARD NOISE TEST (REFER PAGE 14 AND 22)
24_ Specifications Specifications REFERENCE FOR STANDARD NOISE TEST (REFER PAGE 14 AND 22) 1. Cut the RUBBER-SKIRT at the second line from the bottom in step 4. RUBBER-SKIRT cutting line 2. Install the Kick Plate located at * on the table in step 9. Cut-away depth P = B-J E 10 15 20 25 30 35 40 45 5...
Page 25 - Memo
Memo DD68-00132A-02_S04_140602_EN.indd 25 2/6/2014 18:36:47
Page 28 - QUESTIONS OR COMMENTS?
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com BELGIUM 02-201-24-18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) CZECH 800 - SAMSUNG (800-726786) www.samsung.com DENMARK 70 70 19 70 www.samsung.com FINLAND 030-6227 ...