Page 2 - Safety Instructions; CAUTION
2 ENG ◆ Do not install the television in a confined space such as a book case or similar unit. Place on astable stand or table. ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Adequate ventilation is essential to prevent failure of electrical com...
Page 3 - Contents; Foreword
3 ENG Contents ◆ Foreword ■ Safety Instructions ................................................................................................................2 ■ Caution ...................................................................................................................................
Page 4 - Viewing of the Television
4 ENG Viewing of the Television MENU DISPLAY VOLUME ADJUSTMENT CHANNEL SELECTION AUDIO INPUTCONNECTORS VIDEO INPUT CONNECTOR HEADPHONE JACK STAND-BY INDICATOR REMOTE CONTROL SENSOR SKIP/SEARCH(TITLE/CHAPTER/TRACK) STOP PLAY/PAUSE OPEN/CLOSE 75 Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK RCA AUDIO/V...
Page 5 - Infrared Remote Control
5 ENG Infrared Remote Control (depending on the model) TV DVD ZOOM OPEN/CLOSE STEP SUBTITLE CLEAR RETURN ANGLE REPEAT BOOKMARK PROGRAM SLEEP P.SIZE POWER PRE-CH S.STD MUTE INPUT P P.STD AUDIO TV/TEXT EXTERNAL INPUT SELECTION ➢ The performance of the remote control may be affected by bright light. PR...
Page 6 - Connecting the Aerial or Cable Television Network; Connecting a Decoder
6 ENG To view television channels correctly, a signal must be received bythe set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network Connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television. Connecting the Aerial or Cable Tele...
Page 7 - Connecting to the Audio/Video Input/Outputs; Connecting to the Audio Output
7 ENG Connecting to the Audio/Video Input/Outputs Connecting to the RCA Input VCR Video game device Video disc player Camcorder ➢ The A/V connectors are used for equipment with an RGB output, such as VCRs, video game devices,video disc players, and camcorders. Rear of the TV or VCR Video game device...
Page 8 - Inserting the Batteries in the Remote Control; Connecting Headphones
8 ENG You must insert or replace the batteries in the remote controlwhen you: ◆ Purchase the television ◆ Find that the remote control is no longer operatingcorrectly 1 Remove the cover on the rear of the remote control by pressing thesymbol downwards and then pulling firmly to remove it. 2 Insert b...
Page 9 - Switching Your Television On and Off; Placing Your Television in Standby Mode
9 ENG Your television can be placed in Standby mode, in order to reduce: ◆ Power consumption ◆ Wear of the cathode ray tube The Standby mode can be useful when you wish to interruptviewing temporarily (during a meal, for example). 1 Press the POWER button ( ) on the remote control. Result: The scree...
Page 10 - Becoming Familiar with the Remote Control
10 ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons andtheir functions. Button Viewing Function P Used to display the next stored channel. P Used to ...
Page 11 - MENU; Choosing Your Language; DISPLAY; Displaying Information on the Screen
11 ENG When you start using your television for the first time, you mustselect the language which will be used for displaying menus andindications. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the UP/DOWN button until the FUNCTION is selected. Press the LEFT/RIGHT button. Res...
Page 12 - Storing the Channels Automatically
12 ENG You can scan for the frequency ranges available to you,(availability depends on your country). Automatically allocatedprogramme numbers may not correspond to actual or desiredprogramme numbers. However you can sort numbers manuallyand clear any channels you do not wish to watch. 1 Press the M...
Page 13 - Storing the Channels Manually
13 ENG You can store up to 100 television channels, including thosereceived via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number by which you wish to identifyeach stored channel ◆ To entry the frequency of the...
Page 14 - FREQUENCY
14 ENG 6 If you... Then... Know the frequency ◆ Press the UP/DOWN button to of the channel select the FREQUENCY option. to be stored ◆ Enter the required frequency by pressing the numeric buttons orthe LEFT/RIGHT button. ◆ Go to Step 7 . Do not know the ◆ Press the UP/DOWN button to frequency of the...
Page 15 - Sorting the Stored Channels
15 ENG The Sort operation allows you to change the programme numbersto previously stored channels or to clear channels that you willnever watch. This operation may be necessary after you havestored the channels automatically. You can delete those channelsyou do not want to keep. 1 Press the MENU but...
Page 16 - Assigning Names to Channels
16 ENG Channel names will be assigned automatically when channelinformation is broadcast. These names can be changed, allowingyou to assign new names. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the UP/DOWN button until the CHANNEL is selected. Press the LEFT/RIGHT button. R...
Page 17 - Adjusting the Picture
17 ENG You can select the type of picture which best corresponds to yourviewing requirements. 1 Press the MENU button. Result: The main menu is displayed with the PICTURE is selected. 2 Press the LEFT/RIGHT button. Result: The options available in the PICTURE menu are displayed. 3 Press the LEFT/RIG...
Page 19 - Adjusting the Sound
19 ENG You can select the type of special sound effect to be used whenwatching a given broadcast. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the UP/DOWN button until the SOUND is selected. Press the LEFT/RIGHT button. Result: The options available in the SOUND menu are disp...
Page 20 - Selecting the Sound Mode; AUDIO
20 ENG The “AUDIO I-II ” button displays/controls the processing and output of the audio signal. When power is switched ON, the modeis automatically preset to either “Dual- I ” or “Stereo”, depending on the current transmission. Selecting the Sound Mode (depending on the model) Type of broadcast Reg...
Page 21 - Setting the Time and Switching the TV On/Off Automatically
21 ENG You can set the television’s clock and the On/Off timers so that thetelevision will switch On/Off automatically. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the UP/DOWN button until the FUNCTION is selected. Press the LEFT/RIGHT button. Result: The options available i...
Page 22 - Locking the Front Panel; SLEEP; Setting the Sleep Timer
22 ENG The television panel can be locked to prevent it from being usedby young children for example. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the UP/DOWN button until the FUNCTION is selected. Press the LEFT/RIGHT button. Result: The options available in the FUNCTION men...
Page 23 - INPUT; Viewing Pictures from External Sources; Using the Melody Function
23 ENG Once you have connected up your various audio and video systems,you can view the different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made (refer topages 6 and 7 for further details). 2 Switch the television on and if necessary, press the ...
Page 24 - STEP; Playing a Disc
24 ENG Playback 1 Press the OPEN/CLOSE button. 2 Place a disc gently into the tray with the disc’s label facing up. 3 Press the PLAY/PAUSE or OPEN/CLOSE button to close the disc tray. ☛ RESUME function When you stop disc play, the player remembers where youstopped, so when you press the PLAY again, ...
Page 25 - Your MP3 files should be ISO 9660 or JOLIET format.; Your DVD player only accepts one level of file directory.
25 ENG 1 Press the OPEN/CLOSE button. Place a disc gently into the tray with the disc’s label facing up. Result: The first song file of the first folder is played. 2 Press the STOP button to stop playback of the first song file, then press the RETURN button to display the music folder menu on the ri...
Page 26 - Using the Search and Skip Functions
26 ENG Searching through a Chapter or Track Press the FWD or REV SEARCH button on the remote control during playback. - Press the FWD or REV SEARCH button on the remote control and press again to search at a faster speed (2X/4X/8X/16X/ 32X/128X) on the DVD. - Press the FWD or REV SEARCH button on th...
Page 27 - Using the Display Function; DVD
27 ENG When Playing a DVD 1 During playback, press the DISPLAY button. Result: Current title, chapter number, elapsed time, audio,subtitle and volume control will be displayed. 2 Use the numeric buttons to enter a different title, then press theENTER button. Use the LEFT/RIGHT or numeric buttons to ...
Page 28 - REPEAT; Repeat Play
28 ENG Repeat the current track, chapter, title, a chosen section (A-B), orall of the disc (VCD/CD only). When playing a DVD 1 Press the REPEAT button. Repeat screen appears. 2 Select Chapter, Title or A-B using the LEFT/RIGHT button. 3 A-B Repeat 1 Press the REPEAT button. Select A-B on screen with...
Page 29 - PROGRAM; CLEAR; Program Play and Random Play
29 ENG Program Playback 1 Press the PROGRAM button. 2 Use the LEFT/RIGHT button to select PROGRAM . Press the ENTER button. 3 Use the LEFT/RIGHT button to select the first chapter (or track) to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box. 4 Press...
Page 30 - TOP MENU; TOP MENU; TOP MENU; Using the Disc View Function
30 ENG Displays the beginning view of each track and the track number(VCD). 1 During playback, press the TOP MENU button. 2 Press the UP/DOWN button to select Track View . Press the ENTER button. 3 Select the desired view by pressing the UP/DOWN or LEFT/RIGHT buttons. ➢ Press the NEXT SKIP button fo...
Page 31 - Left; Selecting the Audio Language
31 ENG You can select a desired language quickly and easily with theAUDIO button. Using the AUDIO Button 1 Press the AUDIO button. 2 Use the UP/DOWN button to select the desired language on a DVD. Result: The audio languages are represented by abbreviations. 3 Use the UP/DOWN button to select Stereo...
Page 32 - SUBTITLE; Selecting the Subtitle Language
32 ENG You can select a desired subtitle quickly and easily with theSUBTITLE button. Using the SUBTITLE button 1 Press the SUBTITLE button. 2 Use the UP/DOWN button to select the desired subtitle language. 3 Use the LEFT/RIGHT button to determine whether or not the subtitle will be displayed. Result...
Page 33 - ANGLE; Changing the Camera Angle
33 ENG When a DVD contains multiple angles of a particular scene, youcan select the Angle function. Using the ANGLE button Press the ANGLE button to see if an “ANGLE ( )” mark is present at the upper right hand corner of the screen. 1 When an “ANGLE ” mark is shown, press the ANGLE button. Result: T...
Page 34 - ZOOM
34 ENG 1 During playback or pause mode, press the ZOOM button on the remote. A square will be displayed on screen. 2 Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom. 3 Press the ENTER button. ➢ ◆ During DVD playback, press the ENTER button to zoom in 2X/4X/2X i...
Page 35 - Using the Bookmark Function
35 ENG The Bookmark function lets you select parts of a DVD or VCD(MENU OFF mode) so that you can quickly find the section at alater time. Using the Bookmark Function (DVD/VCD) 1 During playback, press the BOOKMARK button. Result: A marker will be displayed. 2 Use the LEFT/RIGHT button to move to th...
Page 36 - Using the Setup Menu
36 ENG The Setup menu lets you customize your DVD player by allowingyou to select various language preferences, set up a parental level,even adjust the player to the type of television screen you have. 1 Press the MENU button. 2 Use the UP/DOWN button to select DVDP SETUP . Use the LEFT/RIGHT button...
Page 37 - Setting Up the Language Features
37 ENG If you set the player menu, disc menu, audio and subtitle languagein advance, it will come up automatically every time you watch amovie. Using the Player Menu Use the Player preference menu to select the language for the player’son-screen displays. 1 Press the MENU button. 2 Use the UP/DOWN b...
Page 39 - PARENTAL CONTROL; Enter Password; Setting Up the Parental Control
39 ENG The Parental Control function works in conjunction with DVDsthat have been assigned a rating - which helps you control thetypes of DVDs that your family watches. There are up to 8 ratinglevels on a disc. 1 Press the MENU button. 2 Use the UP/DOWN button to select DVDP SETUP . Use the LEFT/RIG...
Page 40 - Setting Up the Audio Options
40 ENG 1 Press the MENU button. 2 Use the UP/DOWN button to select DVDP SETUP . Use the LEFT/RIGHT button. Result: The SETUP MENU is displayed. 3 Use the UP/DOWN button to select Audio Options . Press the ENTER button. 4 Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT bu...
Page 41 - Setting Up the Display Options
41 ENG 1 Press the MENU button. 2 Use the UP/DOWN button to select DVDP SETUP . Use the LEFT/RIGHT button. Result: The SETUP MENU is displayed. 3 Use the UP/DOWN button to select Display Options . Press the ENTER button. 4 Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT ...
Page 42 - Disc Type and Characteristics; NTSC; STEREO; PAL
42 ENG Disc Type and Characteristics The DVD player is capable of playing the following types of discs with the corresponding logos: 5” Single-sided: 240 min. Double-sided: 480 min. Single-sided: 80 min. Double-sided: 160 min. Audio + Video Audio + Video Audio - CD is recorded as a DigitalSignal wit...
Page 43 - Part; Teletext Feature
43 ENG Most television channels provide a written information service viaTeletext. They provide such information as: ◆ Television programme times ◆ News bulletins ◆ Weather forecasts ◆ Sports results ◆ Travel information This information, which you cannot modify, is divided intonumbered pages laid o...
Page 44 - INDEX; Displaying the Teletext Screen
44 ENG You can display Teletext information at any time on your television screen. ☛ For Teletext information to be displayed correctly, channel reception must be good; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed To activate the Teletext mode and display the contents pa...
Page 45 - Storing Teletext Pages
45 ENG Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors atthe bottom of the screen. 2 Press the colored button corresponding to the page that will bereplaced. 3 Enter the new page number using the numeric buttons. 4 Repea...
Page 46 - Problemes and Solutions
46 ENG Problemes and Solutions Problemes No sound or picture. Normal picture but no sound. No picture or black and white picture. Sound and picture interference. Blurred or snowy picture,distorted sound. Remote control malfunctions Solutions ◆ Check that the mains lead has been connected to a wall s...
Page 47 - Problemes
47 ENG Problemes and Solutions Problemes No operations can be performed withremote. Disc does not play. 5.1 channel sound is not beingreproduced. The icon appears on screen. Disc Menu doesn’t appear. Playback mode differs from the SetupMenu selection. The screen ratio can not be changed. No audio. F...
Page 48 - - AFTER SALES SERVICE; - Do not hesitate to contact your retailer or service agent; ELECTRONICS
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicatesthat a faulty condition may be present. ELECTRONICS AA68-02285B-00 (ENG)
