Samsung CS21A11 - Manual

English - 1

AA68-03628A-00

➢

The actual configuration of your TV may be different,
depending on your model.

Control Panel

(depending on the model)

◆

You can use the

¨

buttons to switch the TV on when it is

in standby mode depending on the model.

◆

The

ˇ

and

¨

buttons also have the same function as the

œ

/

√

/

…

/

†

buttons on the remote control.

◆

If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

Front (or Side) Panel

Œ

Input source selection

´

On-screen menu display

ˇ

Volume adjustment

¨

Channel selection

ˆ

Standby indicator

Ø

Remote control sensor

∏

Power on/off

➢

The actual configuration of your TV may be different,
depending on your model.

Connection Panel

(depending on the model)

cable television network

Rear Panel

☛

Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the

Œ

(75

Ω

coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

Connecting to the SCART Input/Output

The SCART

´

and SCART

ˇ

connectors are used for

equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART

´

is also used for equipment with an RGB

output, such as a video game device or video disc player.

continued...

or

Œ

Audio input

´

Video input

ˇ

S-Video input

¨

Headphone jack

Front (or Side) Panel

☛

Please be sure to match the color coded input terminals
and cable jacks.

Connecting to the RCA Input

The

Œ

(

AUDIO

-

L

/

R

) and

´

(

VIDEO

) connectors are used

for equipment, such as a camcorder, video disc player, or
video game device.

Connecting to the S-VIDEO Input

The

ˇ

(

S-VIDEO

) and

Œ

(

AUDIO

-

L

/

R

) connectors are used

for equipment with an S-Video output, such as a camcorder
or VCR.

Connecting Headphones

The

¨

(headphone) jack is used for watching a television

programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.

➢

When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.

COLOR TELEVISION

CS21A11/CS21M7/CS21M20/CS21S8/
CS21T10/CS21T20/
CS25A6/CS25A11/CS25K10/CS25M6/
CS25M20/
CS29A7/CS29A11/CS29K3/CS29K5/
CS29K10/CS29M6/CS29M16/CS29M20

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

Register your product at

www.samsung.com/global/register

Connecting to the RCA Input

The RCA

¨

and RCA

ˆ

connectors are used for equipment,

such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the

AUDIO-L

input connector.)

The RCA

∏

connectors are used for equipment such as a

DVD with component output (480i only).

Connecting to the RCA Output

The RCA

Ø

connectors are used for equipment, such as a

recording VCR or audio system.

AA68-03628A-X1Eng_0413 4/13/05 9:22 PM Page 1