Samsung CLP-660 - Manual

i About this user’s guide This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during the actual usage. Both novice users and professional users can refer to this guide for installing and using the machine.This explanation is ma...

ii Safety and Regulatory Information Important Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people:1 Read and understand all instructions. 2 Use common sense whenever operati...

iii When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: Ozone Safety During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisab...

iv Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.Cet appareil numér...

v Original SSLeay License Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved. This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.This library is free for commercial and non-commer...

1 .1 <Introduction> 1 Introduction Thank you for purchasing this Samsung color printer. This chapter includes: • Special features • Machine overview • Control panel overview • Understanding the Status LED • Understanding the menu map Note Some features are optional. Check the specifications se...

1 .2 <Introduction> Machine overview These are the main components of your machine. Front view • The figure above shows your machine with the available accessories. (See page 8.1 for more information)• The symbol * denotes an optional device. Note • All illustrations on this user’s guide may d...

1 .3 <Introduction> Rear view • The figure above shows your machine with the available accessories.• The symbol * denotes an optional device. 1 USB port 5 power switch 2 network port 6 power receptacle 3 15-pin Optional tray connection* 7 control board cover (Memory module, see page 9.1 for mo...

1 .4 <Introduction> Control panel overview 1 Display : Shows the current status and prompts during an operation. 5 Left/right arrow : Navigates available values by moving to the next or previous options. 2 Toner colors : The toner colors shown below the LCD display work together with the displ...

1 .5 <Introduction> Understanding the Status LED The color of the Status LED indicates the machine's current status. Note Always check the message on the display to solve the problem. The instruction in the Troubleshooting section will guide you to operate the machine properly. See page 7.1 fo...

1 .6 <Introduction> Understanding the menu map The control panel provides access to various menus to set up the machine or to use the machine's functions. Refer to the following diagram. Accessing menus The next steps show how to print the menu map of this machine, and they are the general way...

1 .7 <Introduction> Description on each menu The following tables provide the information on each menu. Note The symbol * denotes an optional menu depending on machines. Information Layout Menu Description Menu Map You can print the menu map which shows the layout and current settings of this ...

2 .1 <Software overview> 2 Software overview This chapter gives you an overview of the software that comes with your machine. Further details on how to use the software are explained in the Software section. This chapter includes: • Supplied software • Printer driver features • System requirem...

2 .2 <Software overview> Printer driver (CLP-660 Series) Note If you want to change the printer language, go to printer properties, and change the printer language in Printer tab. System requirements Before you begin, ensure that your system meets the following requirements: Windows Your machi...

3 .1 <Getting Started> 3 Getting Started This chapter gives you step-by-step instructions for setting up the machine. This chapter includes: • Setting up the hardware • Setting up the network • Installing the software • Printer's basic settings Setting up the hardware This section shows the st...

3 .3 <Getting Started> Installing the software You have to install the machine software for printing. The software includes drivers, applications, and other user friendly programs. Note • The following procedure is for when you use the machine as a network machine. If you want to connect a mac...

3 .4 <Getting Started> Note •If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section.•When the printer driver is in installation process, the driver installer detects the locale information of your operating system, and sets the ...

3 .5 <Getting Started> Using power saving feature The machine provides power saving features. When the machine is not in use, you can save electricity with the provided power save mode. Set the specific time the machine goes to the power save mode. 1 Press Menu on the control panel until you s...

4 .1 <Selecting and loading print media> 4 Selecting and loading print media This chapter introduces you how select and load print media for your machine. This chapter includes: • Selecting print media • Loading paper • Setting the paper size and type Selecting print media You can print on a v...

4 .2 <Selecting and loading print media> Specifications on print media Type Size Dimensions Weight a a. If media weight is over 105 g/m 2 (28 lb bond), use the multi-purpose tray. Capacity b b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. Plai...

4 .4 <Selecting and loading print media> Caution Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs are not covered by Samsung’s warranty or service agreements. Preprinted paper • Letterhead must be printed with heat-resistant ink that will not melt, v...

4 .6 <Selecting and loading print media> In the multi-purpose tray The multi-purpose tray can hold special sizes and types of print material, such as postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper. Tips on using the multi-purpose tray...

4 .7 <Selecting and loading print media> 5 After loading paper, set the paper type and size for the multi-purpose tray. See Software section for PC-printing. Note The settings made from the printer driver override the settings on the control panel. 6 After printing, close the multi-purpose tra...

5 .1 <Basic printing> 5 Basic printing This chapter explains common printing tasks. Printing a document Your machine allows you to print from various Windows, Macintosh, or Linux applications. The exact steps for printing a document may vary depending on the application you use. 1 Open the doc...

6 .1 <Maintenance> 6 Maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Printing a machine configuration report • Printing a network report • Monitoring the supplies' life • Cleaning your machine • Maintaining the cartri...

6 .3 <Maintenance> 6 With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridges area and their cavities. Note If toner gets on your clothing, wipe it off with a drycloth and wash it in cold water. Hot water sets toner intofabric. 7 Reinstall all the compartments...

6 .4 <Maintenance> 2 Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine. Caution If you open the front door, be careful not to touch the underneath of the control panel (the lower part of the fuser unit). The temperature of the fuser unit might be high a...

6 .6 <Maintenance> Replacing the paper transfer belt The life of the paper transfer belt is approximately 50,000 black and color pages. After the life span of the paper transfer belt is complete, you have to replace it.• The transfer belt-related message appears on the display, telling it's ti...

6 .7 <Maintenance> 6 Lower the paper transfer belt until it is parallel with the front cover and firmly seated. 7 Close the front cover firmly. Caution If the front cover is not completely closed, the machine will not operate. 8 Turn the machine on. Maintenance parts To avoid print quality and...

7 .1 <Troubleshooting> 7 Troubleshooting This chapter gives helpful information on what to do if you encounter a problem. This chapter includes: • Tips for avoiding paper jams • Clearing paper jams • Understanding display messages • Solving other problems Tips for avoiding paper jams By select...

7 .4 <Troubleshooting> 9 Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. Caution • Do not touch the green surface, the OPC drum or the front of each toner cartridge, with your hands or any other material. Use the handle on e...

7 .5 <Troubleshooting> 3 Pull up the paper jam lever to release the fusing part of the fuser unit and carefully take the jammed paper out of the machine. 4 Press down the paper jam lever to fasten the fusing part. 5 Close the inner cover. 6 After removing the jammed paper, check for paper whic...

7 .6 <Troubleshooting> 5 Press down the paper jam lever to fasten the fusing part. 6 Close the inner cover. 7 After removing the jammed paper, check for paper which may be jammed in other parts of the machine. 8 Close the top cover. Make sure that it is securely latched. Caution If the top cov...

7 .7 <Troubleshooting> 5 Pull the jammed paper out in the direction shown. To avoid tearing the paper, pull it out gently and slowly. 6 Close the front cover firmly. The machine will resume printing. Caution If the front cover is not completely closed, the machine will not operate. Understandi...

7 .10 <Troubleshooting> Solving other problems The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service. Paper feeding problems Condition Suggested solutions ...

7 .12 <Troubleshooting> The print quality of photos is not good. Images are not clear. The resolution is set to Normal . Change the resolution to Best in the machine properties window and then try printing again. The resolution of the photo is very low. Reduce the photo size. If you increase t...

7 .15 <Troubleshooting> Common Windows problems Note Refer to Microsoft Windows 2000/XP/2003/Vista User’s Guide that came with your PC for further information on Windows error messages. An unknown image repetitively appears on the next few sheets or loose toner, light print, or contamination o...

8 .1 <Ordering supplies and accessories> 8 Ordering supplies and accessories This chapter provides information on purchasing cartridges and accessories available for your machine. This chapter includes: • Supplies • Accessories • How to purchase Supplies When the toner runs out, you can order ...

9 .1 <Installing accessories> 9 Installing accessories Your machine is a full-featured model that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance your machine’s c...

10 .1 <Specifications> 10 Specifications This chapter includes: • CLP-610 Series • CLP-660 Series Note The numbers herein is subject to change according to its install environment. CLP-610 Series Item Specifications and Description Printing speed a Up to 20 ppm b (A4), 21 ppm (Letter) Duplex p...

11 .1 <Glossary> 11 Glossary BOOTP It stands for Bootstrap Protocol, a network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assign the IP address from...

1 B Back 1.4 C cleaning inside 6.1outside 6.1 control panel 1.2, 1.4 D default settings loading paper 3.5tray setting 3.5 Display 1.4driver feature 2.1installation 3.3 E energy saver 3.5error message 7.7 F front cover 1.2front cover handle 1.2 J jam clearing paper from the tray1 7.1tips for avoiding...

Installing Printer Software in Windows 4 1 Installing Printer Software in Windows This chapter includes: • Installing Printer Software• Reinstalling Printer Software• Removing Printer Software• Installing mono printer driver N OTE : The following procedure is based on Windows XP, for other operating...

Installing Printer Software in Windows 10 7 After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Fini...

Installing Printer Software in Windows 11 N OTE : If your printer is not already connected to the computer, the following window will appear. • After connecting the printer, click Next . • If you don’t want to connect the printer at this time, click Next , and No on the following screen. Then the in...

Installing Printer Software in Windows 12 Installing mono printer driver This printer features a monochrome-only printer. This mono driver limits output to the black toner, so you can use your printer as a monochrome printer. You must install the mono driver on your computer. Following steps guide y...

Basic Printing 13 2 Basic Printing This chapter explains the printing options and common printing tasks in Windows. This chapter includes: • Printing a Document• Printing to a file (PRN)• Printer Settings - Layout Tab- Paper Tab- Graphics Tab- Extras Tab- About Tab- Printer Tab- Using a Favorite Set...

Basic Printing 14 Printing to a file (PRN) You will sometimes need to save the print data as a file for your purpose. To create a file: 1 Check the Print to file box at the Print window. 2 Select the folder and assign a name of the file and then click OK. N OTES : To print the prn file, you must hav...

Basic Printing 15 Layout Tab The Layout tab provides options to adjust how the document appears on the printed page. The Layout Options includes Multiple Pages per Side , Poster Printing and Booklet Printing . See “Printing a Document” on page 13 for more information on accessing printer properties....

Basic Printing 16 Type Set Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If not, print quality may not be acheived as you want. Cotton : 20 lb to 24 lb (75~90 g/m 2 ) cotton paper such as Gilbert 25 % and Gilbert 100...

Basic Printing 17 Advanced Options You can set advanced settings by clicking the Advanced Options button. • Raster Compression : This option determines the compression level of images for transferring data from a computer to a printer. If you set this option to Maximum, the printing speed will be hi...

Basic Printing 18 About Tab Use the About tab to display the copyright notice and the version number of the driver. If you have an Internet browser, you can connect to the Internet by clicking on the web site icon. See “Printing a Document” on page 13 for more information about accessing printer pro...

Advanced Printing 19 3 Advanced Printing This chapter explains printing options and advanced printing tasks. N OTE : • Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is simil...

Advanced Printing 20 Printing Posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. 1 To change the print settings from your software application, access printer properties. S...

Advanced Printing 21 Printing on Both Sides of Paper You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented.The options are: • Printer Setting , if you select this option, this feature is determined by the setting you’ve made on the control panel...

Advanced Printing 22 Using Watermarks The Watermark option allows you to print text over an existing document. For example, you may want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. There are several predefined wate...

Advanced Printing 23 Using Overlays What is an Overlay? An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper. Rather than using pr...

Using Windows PostScript Driver 24 4 Using Windows PostScript Driver If you want to use the PostScript driver provided with your system CD-ROM to print a document.PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An insta...

Sharing the Printer Locally 25 5 Sharing the Printer Locally You can connect the printer directly to a selected computer, which is called “host computer,” on the network. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. ...

Using Smart Panel 26 6 Using Smart Panel Smart Panel is a program that monitors and informs you of the status of the printer, and allows you to customize the printer’s settings. Smart Panel is installed automatically when you install the printer software. N OTES : • To use this program, you need: - ...

Using Smart Panel 27 Opening the Troubleshooting Guide Using the troubleshooting guide, you can view solutions for error status problems.Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select Troubleshooting Guide . Using Printer Settings Utility Using the Printer S...

Using Your Printer in Linux 28 7 Using Your Printer in Linux You can use your machine in a Linux environment. This chapter includes: • Getting Started• Installing the Unified Linux Driver• Using the Unified Driver Configurator• Configuring Printer Properties• Printing a Document Getting Started The ...

Using Your Printer in Linux 29 4 When the welcome screen appears, click Next . 5 When the installation is complete, click Finish . The installation program has added the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any...

Using Your Printer in Linux 30 Using the Unified Driver Configurator Unified Linux Driver Configurator is a tool primarily intended for configuring Printer.After installing the Unified Linux driver, the Unified Linux Driver Configurator icon will automatically be created on your desktop. Opening the...

Using Your Printer in Linux 31 Classes Tab The Classes tab shows a list of available printer classes. • Refresh : Renews the classes list. • Add Class... : Allows you to add a new printer class. • Remove Class : Removes the selected printer class. Ports Configuration In this window, you can view the...

Using Your Printer in Linux 32 Printing a Document Printing from Applications There are a lot of Linux applications that you are allowed to print from using Common UNIX Printing System (CUPS). You can print on your machine from any such application. 1 From the application you are using, select Print...

Using Your Printer with a Macintosh 33 8 Using Your Printer with a Macintosh Your machine supports Macintosh systems with a built-in USB interface or a 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the PostScript driver by installing the PPD file...

Using Your Printer with a Macintosh 34 Setting Up the Printer Set up for your printer will be different depending on which cable you use to connect the printer to your computer—the network cable or the USB cable. For a Network-connected N OTE : Some printers do not support a network interface. Befor...

35 Printing N OTES : • The Macintosh printer’s properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • You can check your printer name in the supplied CD- ROM. Printing a Document When you ...

37 Printing Multiple Pages on One Sheet of Paper You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages. 1 From your Macintosh application, select Print from the File menu. 2 Select Layout . 3 Select the number of pages you want t...