Samsung AR12NSJXCWK/SK - User Manual
Samsung AR12NSJXCWK/SK Air Conditioner – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Please scan this QR code for detail video of indoor unit installation.
In order to install the indoor unit, you must disassemble the cover panel first. Please proceed following
instructions to disassemble and assemble the cover panel. Hooks (on the cover panel) may get damaged
If you apply excessive force as you disassemble and assemble the cover panel. Please follow the following
instructions.
Removing the screws
Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened
with screws. Remove the Cap screw first and unfasten the screws so that you can disassemble the cover panel.
<Remove the Cap screw>
<Unfasten the screw>
Cap Screw
Cover Panel
Removing the Cover panel (Before mounting the indoor unit)
The bottom panel fits the main body using the side, center, and bottom hooks as shown. Unlock the side hooks
first, and then unlock the center and bottom hooks.
Check the location of the hooks before removing the cover panel.
▶
Location of the hooks on the central part
Number and location of the hooks
Center hook
Bottom hook
※ For specific Hook location and quantity, please
refer to cover panel with indicating arrows based
on physical goods.
Side
hooks
Center hooks
Bottom hooks
▶ Removing the hooks on the side
※ Caution (fragile)
˗
Gently press the both side of the cover panel
inwards (
) and release the hooks on both
sides( ).
▶ Removing the hooks on the central part
※ Caution (fragile)
˗
Use both hands
˗ Release each hook by pushing it up at an angle.
Assembling the Cover panel (After mounting the indoor unit)
To assemble the Cover panel, proceed in reverse
order of disassembling. Use both hands for
assembling and be extra careful not to damage
the pipes and drain hose. Lock the side, center, and
bottom hooks in this sequence. Tighten the bottom
panel with the screws, and close the screw holes with
their cap.
<Lock the side hook>
<Fasten the screw>
<Lock the bottom hook>
<Assemble the Cap screw>
※ Please read instructions on the back of this manual for “Smart install mode”. (Only for single system.)
Disassembling/Assembling the Cover Panel for Indoor Unit Installation
DB68-03934A-11
RAC 3050-PJT SIMPLE MANUAL_IM_EN_DB68-03934A-11.indd 1
2018-02-05 오후 3:35:16
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
