Page 2 - Cool Summer Offer; Features of your new air conditioner
2 This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC) and the Electromagnetic Compatibility Directive (2004/108/EC) of the European Union. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separat...
Page 3 - Safety precautions; Important safety symbols and precautions:; WARNING; severe; CAUTION; Hazards or unsafe practices that may result in; minor; Make sure the machine is grounded to prevent electric shock.; FOR INSTALLATION; Extending the power line may result in electric shock or fire.; technician or service company.; Failing to do so may result in electric shock or fire.
3 ENGLISH Safety precautions USING PARTS Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.Because the following operating instructions cover various model...
Page 4 - Do not install this; This may result in electric shock or fire.; so that draining is performed correctly.; may overflow and result in property damage.
4 Safety precautions Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak. This may result...
Page 5 - the power line into the space behind the appliance.; FOR POWER SUPPLY; thunder/lightning storm, cut the power at the circuit breaker.; FOR USING
5 ENGLISH FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service center. Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object on the power line, insert the power li...
Page 6 - Do not touch the circuit breaker with wet hands.
6 Safety precautions Do not touch the circuit breaker with wet hands. This may result in electric shock. Do not turn the air conditioner off with the circuit breaker while it is operating. Turning the air conditioner off and then on again with the circuit breaker may cause a spark and result in ...
Page 7 - This may result in children seriously injuring themselves.; locations or near infirm people.; Since this may be dangerous due to a lack of oxygen, Open a window at; the power supply and contact the nearest service center.; Do not place objects or devices under the indoor unit.; Water dripping from the indoor unit may result in fire or property; measured according to ISO standard for energy efficiency.
7 ENGLISH FOR USING WARNING Do not place an object near the outdoor unit that allows children to climb onto the machine. This may result in children seriously injuring themselves. Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people. Since ...
Page 8 - Do not operate the appliance with wet hands.
8 Safety precautions Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. This may result in electric shock, fire, problems with the product, or injury. Do not operate the appliance wi...
Page 9 - This appliance can be used by children aged from 8; benzene, thinner or alcohol to clean the appliance.; FOR CLEANING; unit since it has sharp edges.; the air conditioner’ section.
9 ENGLISH For use in Europe : This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and ...
Page 10 - Internal protections via the unit control system; Checking before use
10 Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. Maintaining your air conditioner If the air conditioner operates in cooling mode for long period of time in high humidity area, dew ma...
Page 11 - Main parts; Checking the name of the parts
11 ENGLISH Main parts Display Your air conditioner may slightly look different from illustration shown above depending on your model. Checking the name of the parts Air filter (under the panel) Air flow blade (up and down) Blade pin lever Air intake Air flow blade (left and right) Room temperature s...
Page 12 - Checking the remote controller; Remote controller buttons
12 Checking the remote controller Remote controller buttons • Point the remote controller towards the remote controller receiver of the indoor unit.• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator( ) appears on the ...
Page 13 - Remote controller display; Battery changing time
13 ENGLISH Remote controller display • The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps are in the same space. • If other electrical products operate by the remote controller, call your nearest contact center. Quiet indicator Turbo...
Page 14 - Auto; Dry; Heat; Basic function
14 Basic operation is an operation mode that can be selected by pressing the Mode button. Auto In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature. • If using a multi system, in Auto operation, the ...
Page 16 - Adjusting the air flow direction; Vertical air flow; Using the Turbo function
16 Adjusting the air flow direction Air flow can be directed to your desired position. Turbo function will be helpful to cool your room quickly and effectively. Vertical air flow Horizontal air flow Air flow blades move up and down. Make sure one of the blade pin lever that stick out of the air flow...
Page 17 - mode; Temperature and fan speed changes in; When the air conditioner is on and in cool/heat mode
17 ENGLISH mode For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from mode. 1. Press the button on the remote controller. indicator appears and Off timer indicator starts blinking on the remote controller display. 2. Press the Time Up or Time Down bu...
Page 18 - Setting the On/Off timer; Setting On timer
18 Setting the On/Off timer You can set the air conditioner to turn on/off automatically at desired time. Setting On timer while the air conditioner is off / Off timer while the air conditioner is on 1. Press the On Timer/Off Timer button. On/Off timer indicator will blink on the remote controller...
Page 19 - Combining On Timer and Off Timer; Using the Smart Saver function
19 ENGLISH Combining On Timer and Off Timer If the air conditioner is on If the air conditioner is off Preset time on On timer is longer than Off timer Ex) On timer : 3 hours, Off timer : 1 hour - The air conditioner will operate the Off timer after 1 hour from the moment you have set the timer. You...
Page 20 - Using the Quiet function; Using the Auto Clean function
20 Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air. Press the Auto Clean button. • When the air conditioner i...
Page 21 - Cleaning the air conditioner; Cleaning the indoor unit; Make sure the power is turned off and unplugged from; • Do not clean the display using alkaline detergent.; • Be careful with the sharp edges on the
21 ENGLISH Cleaning the air conditioner Cleaning the indoor unit Cleaning the outdoor unit heat exchanger Opening the panel Wipe the surface of the unit with a slightly wet or dry cloth when needed. When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clea...
Page 22 - Removing the Air filter; Cleaning the air filter
22 Cleaning the air conditioner Removing the Air filter Grab the handle and lift it up. Then, pull the Air filter towards you and slide it down. Cleaning the air filter Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing. Open ...
Page 23 - Maintaining the air conditioner; odors which may have generated from dampness.; Periodical checks; the area of installation is very dusty.
23 ENGLISH Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and cut-off the power supply. There may be inte...
Page 24 - Troubleshooting; PROBLEM
24 Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not work at all. • Check power status and then operate the air conditioner again. • Plug in or switch on the circuit brea...
Page 26 - INSTALLATION PARTS; General information
26 Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment. • Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.• Verify that installation and testing operations are performed...
Page 27 - Installing the unit; Indoor unit; Choosing the installation location
27 ENGLISH Installing the unit IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes. Upon receipt, inspect the product to verify that it has not been damaged during...
Page 28 - Outdoor Unit
28 Outdoor Unit Where it is not exposed to strong wind Well ventilated and dustless places Out of the direct sunlight and rain Where neighbors are not annoyed by operation sound or hot air Solid wall or support that prevents vibration and is strong enough to hold the product weight Where...
Page 29 - Space Requirements for Outdoor Unit; When installing 1 outdoor unit
29 ENGLISH Space Requirements for Outdoor Unit When installing 1 outdoor unit When installing more than 1 outdoor unit 30 0 or m or e When the air outlet is opposite the wall 15 00 o r m or e When the air outlet is towards the wall 30 0 or m or e 150 or more 600 or more When 3 sides of the out...
Page 30 - Accessories; Accessories in the indoor unit case
30 Choosing the installation location (Unit : mm) When the upper part of the outdoor unit and the air outlet is opposite the wall When the walls are blocking front and the rear side of the outdoor units When front and rear side of the outdoor unit is towards the wall 50 0 or m or e 300 or more...
Page 31 - Fixing the installation plate; Optional accessories; General Tools
31 ENGLISH • Make sure to drill only one hole after choosing the direction of the pipe. Fixing the installation plate The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air conditioner. Optional accessories Tools required for ins...
Page 32 - Connecting the assembly cable; Cable specification
32 Wall <20mm Plastic Anchor Fixing the installation plate 2. Fix the indoor unit. If you fix the indoor unit on a wall (1) Fix the installation plate to the wall giving attention to the weight of the indoor unit. If you fix the indoor unit on a window frame (1) Determine the positions of the woo...
Page 34 - Installing and connecting the assembly pipe of the indoor unit
34 Installing and connecting the assembly pipe of the indoor unit 1. Cut out the appropriate knock-out piece (A, B, C) on the rear of the indoor unit unless you connect the pipe directly from the rear. 2. Smooth the cut edges. 3. Remove the protection caps of the pipes and connect the assembly pipe ...
Page 35 - Purging the indoor unit; Cutting or extending the pipe
35 ENGLISH Purging the indoor unit 1. Make sure that you have all the required tools (pipe cutter, reamer, flaring tool and pipe holder). 2. If you want to shorten the pipe, cut it using a pipe cutter, ensuring that the cut edge remains at 90° with the side of the pipe (see below examples of correct...
Page 36 - Installing and connecting the drain hose of the indoor unit
36 Cutting or extending the pipe Outer Diameter Torque (kgf•cm) ø6.35 mm 140~170 ø9.52 mm 250 ~280 ø12.70 mm 380~420 ø15.88 mm 440~480 ø19.05 mm 990~1210 ø22.23 mm 990~1210 Indoor outlet pipe Connecting pipe Flare nut Wall Indoor unit Drain hose The drain hose must NOT slant upwards. The end of the ...
Page 37 - Drain hose installation; Changing direction of the drain hose
37 ENGLISH • Make sure the indoor unit is in upright position when you pour water to check for leakage. Make sure that the water does not overflow onto the electrical part. Change the direction only when it is necessary. 1. Detach the rubber cap with the plier.2. Detach the drain hose by pulling it ...
Page 38 - Installing and connecting the drain hose of the outdoor unit; Purging the connected pipes
38 Installing and connecting the drain hose of the outdoor unit Frame Ground Estimated snow fall Snow-proof hood Bottom surface of outdoor unit Drain hose Drain hole Drain plug While heating, ice may accumulate. During the process of defrosting, check if condensation draining is adequate. For adequa...
Page 39 - Adding Refrigerant
39 ENGLISH 3. Connect the charging hose of the low-pressure side of manifold gauge to a gas service port as seen in the picture. 4. Open the valve of the low pressure side of manifold gauge counterclockwise. 5. Purge the air in the connected pipes using the vacuum pump for about 15 minutes. Make s...
Page 41 - Performing the gas leak tests
41 ENGLISH Performing the gas leak tests C D A B Make sure to check for gas leaks before completing the installation process (connecting the assembly pipe and hose between indoor unit and outdoor unit, insulating the cables, hose and pipe, and fixing the indoor unit to the installation plate). To ch...
Page 42 - Fixing the indoor unit in place; Fixing the outdoor unit in place; Outdoor unit installed on the wall by rack
42 Fixing the indoor unit in place Insulation Pipes 'X' mm Rubber leg 'Y ' m m Perform the following work on the area where gas leak test was done priorly. After checking for gas leaks in the system, insulate the pipe, hose and cables. Then place the indoor unit on the installation plate. 1. To avoi...
Page 43 - Final Check and Trial Operation; Pump down procedure (when removing the product)
43 ENGLISH Final Check and Trial Operation To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly. Check the followings: • Strength of the installation site • Tightness of pipe connection to detect gas leak • Electric wiring connect...
Page 44 - How to connect your extended power cables
44 Items to prepare (compressor and insulation tape should be prepared by an installation technician.) 1. As shown in the figure, peel off the shields from the rubber/wire of the power cable. - Peel off 20 mm of the wire shields of the tube installed already. 2. Insert both sides of core wire of the...
Page 46 - QUESTIONS OR COMMENTS?
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0330 SAMSUNG (7267864) www.samsung.com/uk/support EIRE 0818 717100 www.samsung.com/ie/support GERMANY 0180 6 SAMSUNG bzw. 0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf ) [HHP] 0180 6 M SAMSUNG bzw...
Page 47 - Air Conditioner; user & installation manual; imagine
AR09FSFT Series AR12FSFT Series AR18FSFT Series AR24FSFT Series AR09HSFT Series AR12HSFT Series Air Conditioner user & installation manual imagine the possibilities Thank you for purchasing this Samsung product. DB68-03377A- 9 EN ES FR IT PT DE EL Boracay ET_AR09FSFT@_IBIM_DB68-03377...
