Page 2 - English; Contents; User manual; How to use
2 English Contents User manual 4 Safety Information 4 Safety Information 4 At a Glance 14 Indoor Unit Overview 14 Global duct • Operating temperature and humidity • Pairing an indoor unit with a remote control 14 Cleaning and Maintenance 16 Cleaning and Maintaining 16 Cleaning the air filter • Clean...
Page 3 - Installation manual; Installation Procedure; Correct Disposal of This Product; (Applicable in countries with separate collection systems)
3 English Installation manual 32 Installation Procedure 32 Installing the indoor unit 32 Performing the gas leak test 33 Insulating the refrigerant pipes 33 Installing the drain hose and drain pipe 35 Performing the drainage test 36 Wiring work 37 Connecting the power and communication cables 37 Set...
Page 4 - mation; to ensure that you know how to safely and efficiently operate the; WARNING; Safety Information; Safety Information
Safety Information 4 English Safety Infor mation Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.Because the following operating instructions cover vario...
Page 5 - Refrigerant; FOR INSTALLATION; • Extending the power line may result in electric shock or fire.
5 English Safety Infor mation Symbol Meaning Flammable gas Flammable materials Refrigerant Safety Group A2L Refrigerant safety group Read operating manual Refer to operating manual Read service manual FOR INSTALLATION WARNING Use the power line with the power specifications of the product or higher ...
Page 7 - CAUTION
7 English Safety Infor mation Never install the outdoor unit in a location such as on a high external wall where it could fall. • If the outdoor unit falls, it may result in injury, death or property damage. This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic...
Page 8 - FOR POWER SUPPLY; • This may result in electric shock or fire.; FOR USING; • Failing to do so may result in electric shock or fire.
Safety Information 8 English Safety Infor mation FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service centre.Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object ...
Page 12 - • This may result in burns or injury.
Safety Information 12 English Safety Infor mation Do not apply a strong impact to the remote controller and do not disassemble the remote controller.Do not touch the pipes connected with the product. • This may result in burns or injury. Do not use this air conditioner to preserve precision equipmen...
Page 13 - FOR CLEANING
13 English Safety Infor mation FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner, alcohol or acetone to clean the appliance. • This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing ma...
Page 14 - At a Glance; Global Duct; Air intake; Indoor Unit Overview
14 English At a Glance At a Glance Global Duct Air intake Air outlet Ceiling Air filter (the return air side) Indoor Unit Overview
Page 15 - Operating temperature and humidity; Mode; Pairing an indoor unit with a remote control; NOTE
15 English At a Glance Operating temperature and humidity When using the air conditioner follow the operating temperature and humidity ranges. Mode Indoor temperature Outdoor temperature Indoor humidity Cool mode 18~32 °C Depending on the outdoor unit specification 80% or less Dry mode Heat mode 30 ...
Page 16 - Cl; water and dry it in a ventilated area.; • Clean the air filter once every two weeks.; Cleaning and Maintenance; Cleaning and Maintaining
16 English Cl eaning and Maint enanc e Before cleaning the indoor unit, be sure to turn off the auxiliary power switch. Cleaning the air filter For the best performance from your air conditioner, clean it periodically. When cleaning, make sure to unplug from the unit for user’s safety. When cleaning...
Page 18 - Filter Reset; Indoor
Cleaning and Maintaining 18 English Cl eaning and Maint enanc e Resetting the filter-cleaning reminder Option Filter Reset After cleaning and reassembling the air filter, be sure to reset the filter-cleaning reminder as follows :• Indoor unit with the wired remote control: a. Press the button to dis...
Page 19 - Unit
19 English Cl eaning and Maint enanc e Periodical maintenance Unit Maintenance item Interval Requires qualified technicians Indoor unit Clean the air filter. At least once a month Clean the condensate drain pan. Once a year Required Clean up the heat exchange. Once a year Required Clean the condensa...
Page 21 - The product does not
21 English Cl eaning and Maint enanc e Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expense. Problem Solution The product does not work.Error E601 • Connect an R-32-exclusive wired remote control.* MWR-WG01*N* R-32-exclus...
Page 25 - Technical specifications; Information about Refrigerant
25 English Cl eaning and Maint enanc e Technical specifications Model Net weight (kg) dimension(W x Dx H) (mm) AM022DNMDKG 27.0 850 x700 x 250 AM028DNMDKG 27.0 850 x700 x 250 AM036DNMDKG 27.0 850 x700 x 250 AM045DNMDKG 27.0 850 x700 x 250 AM056DNMDKG 27.0 850 x700 x 250 AM071DNMDKG 27.0 850 x700 x 2...
Page 26 - ow; Checking the power connections; To connect the product to a Wi-Fi network,; Checking the Internet connectivity; Downloading the SmartThings app and; Downloading the SmartThings app; SmartThings app
SmartThings app 26 English H ow to use How to use 1 Checking the power connections Check if the power is connected to the product and the access point. 2 Setting up and connecting to a Wi-Fi access point using your smartphone 1 To connect the product to a Wi-Fi network, turn on Wi-Fi at "Setting...
Page 27 - Registering your Samsung account; Connecting the SmartThings app to; Selecting the product to connect to; Connecting the SmartThings app to your
27 English H ow to use 2 Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. NOTE • If you alrea...
Page 28 - • If a failure message appears while adding a device,
SmartThings app 28 English H ow to use • If a failure message appears while adding a device, see "Setting up and connecting to a Wi-Fi access point using your smartphone" on page 26. The connection may fail temporarily due to an installation location problem of the access point or other prob...
Page 29 - Troubleshooting
29 English H ow to use Troubleshooting Check the following before requesting a service from the Service Center Symptom Measure The installed SmartThings app cannot access the air conditioner. • Make sure you have connected the air conditioner to a wireless router. I cannot log in with my Samsung acc...
Page 30 - Regulatory Notice
30 English H ow to use Regulatory Notice Wi-Fi Frequency Range Transmitter Power (Max) 2412 - 2472 MHz 20 dBm Bluetooth Frequency Range Transmitter Power (Max) 2402 - 2480 MHz 20 dBm Hereby, Samsung declares that this radio equipment is in compliance with Directive 2014/53/EU and with the relevant s...
Page 32 - Installing the indoor unit
Installation Procedure 32 English Installation manual Installation Procedure Installing the indoor unit When deciding on the location of the air conditioner with the owner, the following restrictions must be taken into account 1 Place the pattern sheet on the ceiling at the spot where you want to in...
Page 33 - Performing the gas leak test
33 English Installation manual Performing the gas leak test To identify potential gas leaks in the indoor unit, inspect the connection area of each refrigerant pipe using a leak detector for R-32.Before vacuuming and circulating the refrigerant gas, pressurize the whole system with nitrogen (using a...
Page 35 - Installing the drain hose and drain; Drainpipe Connection without the drain pump; Drainpipe Connection with the drain pump
35 English Installation manual • Refrigerant pipe after EEV kit and MCU – Install the gas side and liquid side pipes, leave 10mm of space. – When contacting the gas side and liquid side pipe, use 1 grade thicker insulator. Installing the drain hose and drain pipe 1 Push the supplied drain hose as fa...
Page 36 - Centralized Drainage without the drain pump; Centralized Drainage with the drain pump; Performing the drainage test
Installation Procedure 36 English Installation manual Centralized Drainage without the drain pump 1 Install horizontal drainpipe with a slope of 1/100 or more and fix it by hanger space of 1.0~1.5m. 2 Install U-trap at the end of the drainpipe to prevent a nasty smell to reach the indoor unit. 100mm...
Page 37 - Wiring work; Connecting the power and; Power and communication cable connection
37 English Installation manual N L N L N L N L V1 V2 Indoor Unit 1 Indoor Unit 2 Indoor Unit 3 Indoor Unit 4 Indoor Unit 5 Indoor Unit 6 Outdoor Unit Wired Remote Control EEV kit ※ Ceiling, wall-mounted indoor unit. 220-240V~ or ※ ELCB : Essential Installation MCCB+ ELB ELCB Wiring work Connecting t...
Page 40 - Example of Installation
Wiring work 40 English Installation manual Example of Installation Total power cable length L = 100(m), Initial pull-in current = 10[A], Running current of each units = 1[A], Total 10 indoor units were installed MCCB+ELB 10 [A] 9 [A] 1 [A] 100[m] 10[m] 20[m] 0[m] Indoor unit 10 Indoor unit 1 Indoor ...
Page 41 - Setting additional functions of wired remote control; Automatic Air-Volume
41 English Installation manual Setting additional functions of wired remote control Automatic Air-Volume An Automatic Air-Volume function must be performed for each indoor unit with the wired remote control attached. With its BLDC motor, you can use smart adjust the indoor unit fan speed depending o...
Page 42 - User mode; – Default : 0, reflecting the status value of the
Wiring work 42 English Installation manual EASY Tuning If more cooling and heating airflow rate is wanted, or if the quieter operation set is wanted, the air conditioner can be tuned for comfort.Indoor unit airflow rate for high, mid and low modes increases or decreases for +2 ~ -2 Steps with wired ...
Page 43 - Setting the indoor unit option code with the wired remote control; • The password entry screen appears.; • The settings screen for installation/service mode appears.
43 English Installation manual Setting the indoor unit option code with the wired remote control To set the indoor unit option code use the wired remote control and follow the directions below. 0 Please enter your PASSWORD Service mode 1 If you want to use the various additional functions for your W...
Page 45 - Product Option; Product Option; Product Option
45 English Installation manual Product Option (3/5) Press the OK button to set the current step. “1” 0 0 0 0 0 Product Option (2/5) Press the OK button to set the current step. “0” 0 0 0 0 Target Address: 20 00 01 Target Address: 20 00 01 1 00000 00000 00000 00000 00000 00000 00000 00000 Depending o...
Page 47 - control; Setting an indoor unit address; Indoor Unit/Ventilator Option; Setting indoor unit addresses and installation option
47 English Installation manual Setting indoor unit addresses and installation options with wired remote control Set the indoor unit address and installation option with the remote control option. Set each option separately since you cannot set the ADDRESS setting and indoor unit installation setting...
Page 48 - Main Address; RMC Address; Setting an indoor unit installation option
Setting indoor unit addresses and installation option 48 English Installation manual Main Address Press the 'OK' button to complete the setting. New address 0 8 20 00 01 Target Address RMC Address Press the 'OK' button to complete the setting. New address 0 8 20 00 01 Target Address [Address > Ma...
Page 49 - Installation Option 1; Installation Option 1; Installation Option 1; Installation Option 1
49 English Installation manual Installation Option 1 (3/5) Press the OK button to set the current step. Installation Option 1 (4/5) Press the OK button to set the current step. Installation Option 1 (5/5) Press the OK button to set the current step. “1” 0 0 0 0 “2” 0 0 0 0 “3” 0 0 0 0 0 0 0 Installa...
Page 51 - Optional : Setting the indoor unit; Common steps for setting the addresses and
51 English Installation manual Optional : Setting the indoor unit addresses and the installation options with the wireless remote control You cannot set both of the indoor unit addresses and the installation options in a batch: set both of them respectively. Common steps for setting the addresses an...
Page 58 - Setting the indoor unit installation option
Setting indoor unit addresses and installation option 58 English Installation manual CAUTION • If you enter A to F to the SEG5 or SEG6, the indoor unit main address is not changed. • If you enter 0 to the SEG3, the indoor unit maintains the previous main address although you enter the option value f...
Page 59 - Installation options for the 02 series
59 English Installation manual Installation options for the 02 series SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 0 2 Evaporator Drying Use of external room temperature sensor / Minimizing fan operation when thermostat is off Use of central control FAN RPM compensation SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 1 Use of dr...
Page 63 - 5 series installation option
63 English Installation manual (*4) When the following 2 or 3 is used as external heater On/Off signal, the signal for monitoring external contact control will not be output. 2: Fan is turned on continually when the external heater is turned on, 3: Fan is turned off when the external heater is turne...
