Page 2 - Contents; USING PARTS
2 Contents USING PARTS Safety precautions ..................................................................................................................................................................................................................................4 Checking before use .............
Page 3 - How to use this unit
3 ENGLISH How to use this unit This unit should be used with air conditioners. Air conditioning is impossible only by this unit, because this unit does not have temperature control function. (It’s capacity is too small in order to control the room temperature to the whole) And should be operated in ...
Page 4 - Important safety symbols and precautions:; Hazards or unsafe practices that may result in; FOR INSTALLATION; Use the power line with the power specifications of the product or; Extending the power line may result in electric shock or fire.; Safety precautions
4 Before using your new product, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.Because the following operating instructions cover various models, the characteristics of your product may diff...
Page 5 - Failing to do so may result in electric shock or fire.
5 ENGLISH The installation of this appliance must be performed by a qualified technician or service company. X Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury. Install a switch and circuit breaker dedicated to the product. X Failing to do so may r...
Page 7 - FOR POWER SUPPLY
7 ENGLISH Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object on the power line, insert the power line between objects, or push the power line into the space behind the appliance. X This may result i...
Page 8 - Do not touch the circuit breaker with wet hands.; This may result in electric shock.; Do not strike or pull the product with excessive force.; This may result in fire, injury, or problems with the product.; climb onto the machine.; This may result in children seriously injuring themselves.; Do not turn the product off with the circuit breaker while it is; If a child places a bag over its head, it may result in suffocation.; outlet of the product.
8 FOR USING WARNING To reinstall the product, please contact your nearest service centre. X Failing to do so may result in problems with the product, water leakage, electric shock, or fire. X A delivery service for the product is not provided. If you reinstall the product in another location, additi...
Page 9 - Do not use the product as a ventilator for a burner.; Do not attempt to repair, disassemble, or modify the appliance; FOR USING; Do not place objects or devices under the indoor unit.; Failing to do so may result in injury, death or property damage.; Max current is measured according to IEC standard for safety and
9 ENGLISH X Take special care that children do not injure themselves by inserting their fingers into the product. Do not use the product as a ventilator for a burner. X If you use a burner with gas or gasoline, you need to have separate ventilation system for the combustible apparatus. If any foreig...
Page 12 - AA; use benzene, thinner or alcohol to clean the appliance.; FOR CLEANING; Take care when cleaning the surface of the heat exchanger of the; Failure to do may result in damage, electric shock or fire.
AA 12 FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance. X This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, cut-off the power suppl...
Page 13 - Checking Up the Sub Power Supply; Install & Operation Ranges; Checking before use; Maintaining your product; Internal protections via the unit control system
13 ENGLISH Checking Up the Sub Power Supply The sub power supply is a device to prevent electric leakage due to the over current. Install the sub power supply separately near the unit and turn it off when you clean the unit or you do not use the unit for a long period of time. Install & Operatio...
Page 14 - Tips on using product
14 Tips on using product Here are some tips that you would follow when using your product. TOPIC RECOMMENDATION Heat-EX Mode • Energy loss is minimized by recovering energy exhausted when indoor heating and cooling Quiet Mode • This allows you to have quiet sleep and fresh air while sleeping.• The E...
Page 15 - Checking the name of the parts; Main parts
15 ENGLISH Checking the name of the parts Main parts Inspection hole Access for inspection/ maintenance A A Model 'A' (mm) AM050FNKDEH 450 x 450 AM100FNKDEH 550 x 550 X There is access for inspection/maintenance for cleaning the air filter and the heat exchanger element. X Lack of installation and m...
Page 16 - Display; Operation On/Off button
16 For detailed instruction, refer to the wired remote controller user manual. X Wired remote controller (not supplied) X Model: MWR-WE10N Display Checking the name of the parts ③ ①② ⑰ ⑯ ⑮ ⑭ ⑱ Operation On/Off button LED Indicator (Green : Normal / Red : Error) Temperature Setting Button ④ ⑤ ⑨ ⑩ ⑪ ⑫...
Page 17 - Classification
17 ENGLISH Classification Indication Function Product Related Information ① Displays System operation ② Displays Quiet/Sleep operation ③ Displays Indoor temperature/Set temperature ④ Displays discharge temperature control ⑤ Displays CO 2 /power consumption ⑥ Displays AC fan speed ⑦ Displays Blade se...
Page 18 - Buttons; 6 19
18 Checking the name of the parts Buttons ③ ⑥ ① ⑧ ⑨ ⑫ ⑤ ② ⑬ ⑱ ⑮ ⑳ ⑪ ⑯ ⑲ ⑩ ⑰ ⑭ ④ ⑦ Classification Button Function Unit Related Information ① Operation On/Off button Turns the unit power On/Off ② Mode button Selects the desired unit operation ③ Temperature setting button Sets the desired te...
Page 20 - Basic operation; Press the; When controlling an ERV with DX-COIL
20 Basic operation Press the button to begin the ventilator(ERV) operation. Press the button to select the desired operation. Press the button to change the fan speed. Heat-EX (High) ▷ (Turbo) ▷ (Medium) Quiet Can’t change the fan speed. Away (Medium) By-Pass (High) ▷ (Turbo) ▷ (Medium) Auto (High) ...
Page 21 - When controlling an Air conditioner
21 ENGLISH Press the button to begin operating the air conditioners. Press the button to select the desired operation. Press the button to select a fan speed. Auto (Auto) Cool (Low) , (Medium), (High), (Auto) Dry (Auto) Fan (Low) , (Medium), (High) Heat (Low) , (Medium), (High), (Auto) Press the but...
Page 23 - Cleaning and maintaining the unit; Cleaning the Air filter
23 ENGLISH Cleaning and maintaining the unit Cleaning the Air filter Clean the air filters at least twice a year. However, the frequency may vary depending on use and environment. Clean the air filters more frequently in dusty place. Make sure that the power supply is disconnected before cleaning th...
Page 24 - Cleaning the Heat Exchange Element
24 AA Cleaning the Heat Exchange Element Clean the Heat exchange element at least twice a year. However, the frequency may vary depending on use and environment. Clean the Heat exchange element more frequently in dusty place. Make sure that the power supply is disconnected before cleaning the unit. ...
Page 25 - Period of Replacement & Cleaning; Basic parts
25 AA ENGLISH Maintaining your product Period of Replacement & Cleaning Basic parts Parts Replacement Cleaning Reasons for exchange or cleaning Air filter 2 years 6 months Dust clogging, Performance deterioration Heat exchange element - 6 months Dust clogging Drain pan - 1 year Pollution • The p...
Page 26 - Appendix; Troubleshooting
26 Refer to the following chart if the product operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The product does not operate immediately after it has been restarted. • Because of the protective mechanism, the appliance does not start operating immediately to keep th...
Page 27 - Model specification (Weight and dimension)
27 ENGLISH PROBLEM SOLUTION The air does not come out from the air outlet. • Check whether air filter or heat exchange element is blocked by dust. In case of dust accumulation, it may decrease the efficiency of the ventilator. Clean the air filter and the heat eschange element frequently. • Check wh...
Page 28 - General information; INSTALLATION PARTS
28 General information X Carefully read the content of this manual before installing the product and store the manual in a safe place in order to be able to use it as reference after installation. X For maximum safety, installers should always carefully read the following warnings. X Store the opera...
Page 29 - Installing the unit
29 ENGLISH Installing the unit IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes. X Upon receipt, inspect the product to verify that it has not been damaged during...
Page 31 - Space Requirements
31 AA The following accessories are supplied with the indoor unit. The type and quantity may differ depending on the specifications. Accessories User & Installation manual Insulation cover pipe in Insulation cover pipe out Insulation drain Insulation cover drain Insulation pipe Cable tie Flexibl...
Page 32 - Dimension of the indoor unit; Selecting the installation location
32 X The ventilator should be installed in a ceiling which has enough space above as seen in the picture. Dimension of the indoor unit Model A B C D E F G H I AM050FNKDEH 1036 1000 987 1553 270 99 130 253 135 AM100FNKDEH 1183 1135 1189 1763 340 84 160 362 170 Selecting the installation location 20 m...
Page 33 - Indoor unit installation
33 ENGLISH 1. Insert bolt anchors, use existing ceiling supports or construct a suitable support as shown in figure. 2. Install the suspension bolts depending on the ceiling type. 3. Fit two nuts on each suspension rod allowing space for the indoor unit between. 4. Hang the indoor unit to the suspen...
Page 35 - Cutting/flaring the pipe
35 ENGLISH Cutting/flaring the pipe 1. Make sure that you prepared the required tools. (pipe cutter, reamer, flaring tool and pipe holder) 2. If you want to shorten the pipe, cut it using a pipe cutter ensuring that the cut edge remains at 90° with the side of the pipe. There are some examples of co...
Page 36 - Leak test; Insulation; Performing leak test & insulation
36 • Always make the seam of pipes face upwards.• Any joints in the insulation must be taped or glued with approved materials to prevent water leaks. Leak test LEAK TEST WITH NITROGEN (before opening valves)In order to detect basic refrigerant leaks, Pressure test the system to 4.1MPa with oxygen fr...
Page 39 - Drain pipe and drain hose installaton; Drainpipe Connection
39 ENGLISH Drain pipe and drain hose installaton Drainpipe Connection 1. Install horizontal drainpipe with a slope of 1/100 or more and fix it by hanger space of 1.0~1.5 m. 2. Install U-trap at the end of the drainpipe to prevent any odors reaching the indoor unit. 3. Do not install the drain with a...
Page 40 - Testing the drainage; Examples of incorrect duct installation
40 Drain pipe and drain hose installaton Duct connection Testing the drainage Drainpipe Drain water drops Prepare a little water about 5 liters. Make sure to insulate the duct refering to the picture. X Wind the aluminum tape securely round the duct connection so that the air in the duct does not le...
Page 41 - Wiring work; Power and communication cable connection
41 ENGLISH Wiring work Power and communication cable connection Selecting compressed ring terminal 1. Before wiring work, you must turn off all power source.2. Indoor unit power should be supplied through the breaker(ELCB or MCCB+ELB) separated by the outdoor power. ELCB: Earth Leakage Circuit Break...
Page 42 - Specification of electric wire; Example of Installation
42 Specification of electric wire 10[A] Indoor unit10 20[m] 10[m] 0[m] 9[A] 1[A] 100[m] Indoor unit2 Indoor unit1 ELCB or MCCB+ ELB Rating current Model Rating current AM050FNKDEH 1.7A AM100FNKDEH 3.7A Power supply MCCB ELB or ELCB Power cable Earth cable Communication cable Max : 242V Min : 198V ...
Page 43 - Tightening torque
43 ENGLISH • Select the power cable in accordance with relevant local and national regulations.• Wire size must comply with local and national code.• Power Supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible cord.(Code designation IEC:60245...
Page 44 - How to connect your extended power cables
44 How to connect your extended power cables 1. Prepare the following tools. Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm) Spec MH-14 20xØ6.5 (HxOD) Width 19 mm 70xØ8.0 (LxOD) Shape 2. As shown in the figure, peel off the shields from the rubber and wire of the p...
Page 46 - Basic sepcification of display
46 AA Indoor unit setting Power and communication cable connection SEG1: Displays "U" when an indoor unit communicates with a wired remote controller. SEG2: Displays a digit of RMC address.(0~F)SEG3/SEG4: Displays two digits of main address. In case of initial status, U0 00 will be display...
Page 47 - Setting an indoor unit address and installation option
47 ENGLISH Setting an indoor unit address and installation option The procedure of option setting using wireless remote controller Set the indoor unit address and installation option with remote controller option. Set the each option separately since you cannot set the ADDRESS setting and indoor uni...
Page 57 - Changing a particular option
57 ENGLISH 1. SEG 3, 4, 5, 6, 8, 9 additional information When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows. Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9. Changing a particular opti...
Page 58 - External Control
58 AA Additional functions External Control Use an external control to interlock control the ventilator with external device or external contact point. X It connects both sides of EXT1. - Only 1 unit can be connected. X The picture displays the condition that external controller, kitchen hood and hu...
Page 59 - Trial operation
59 AA ENGLISH Trial operation When you press the trial operation button(KEY1), the unit operates as the table below. TACT S/W PUSH (KEY1) Operation Display One time Not working 1SOL Two times Damper operation * Opens and closes one time 2DAM Three times Supply / Exhaust FAN operation * Turbo breeze ...
Page 61 - Final checks and user tips
61 AA ENGLISH Final checks and user tips To complete the installation, perform the following checks and tests to ensure that the product operates correctly. After finishing the installation of the product, you should explain the following to the user. Refer to appropriate pages in the user & ins...
Page 62 - ERROR CODE DISPLAY on Wired remote controller
62 AA Troubleshooting If an error occurs during the operation, The Wired Remote controller show that Error mode. - When ERRORS related to cooling and heating operation occur, the ventilator (ERV) continues to perform in normal operation. - When ERRORS related to a ventilator (ERV) occur, it stops op...
Page 63 - Additional Functions of Your Wired Remote Controller; Wired Remote Controller Installation/Service Mode
63 ENGLISH Main menu Sub menu Function Data bit Factory setting Description Unit 1 1 Wireless remote controller Option setting/checking (1) Cooling/Heating selection 1 0 0 – Cooling/Heating, 1 – Cooling only - Use of wireless remote controller 2 1 0 – No use, 1 - Use - MAIN/SUB wired remote controll...
Page 66 - The example of ERV PLUS option setting method
66 The example of ERV PLUS option setting method 1. Press Set and ESC buttons at the same time for more than 3 seconds. X (Main menu) will be displayed and then press the [ ∧ ]/[ ∨ ] button to select no.6. 2. Press [ ＞ ] button to select the number you will set. X Press [ ∧ ]/[ ∨ ] button and select...
Page 67 - MEMO
67 ENGLISH MEMO DB68-03715A-11_IBIM_ERV PLUS_EU_EN_.indd 67 2024-01-17 오전 8:55:22
Page 70 - QUESTIONS OR COMMENTS?
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/ support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/ support GERMANY 06196 77 555 77 www.samsung.com/de/ support FRANCE 01 48 63 00 00 www.samsung.com/fr/ support SPAIN 91 175 00 15 www.samsung.com/es/ s...
