Samsung AH68-01567B - Manual

9 12-Hour Continuous Play ● This unit uses one AAA/LR03 alkaline battery. Operation can last up to 12hours.Actual playing time may vary according to the type and capacity of the battery. Voice Recording Function ● You can do a Voice Recording with high quality and use it for a conference. Sound ● Yo...

13 Connecting the yepp to a PC 12 Before connecting yepp to PC, make sure to install USB driver. If “Add New Hardware Wizard” appears, press the [Cancel] button and install the USB driver. System Requirements. The PC system must meet the following specifications: ● Pentium 133MHz or greater. ● Windo...

15 14 Connect a USB cable to the USB port on the computer. Connect the other end of a USB cable to the USB cableconnection port on the bottom of the yepp, and pressthe button on the main unit. ● If you disconnect the USB cable from your PC whileimplementing a command or initializing during USB drive...

17 Manual Installation of the USB Driver 16 Go to “Downloading/Uploading files” on page 20 if the USB driver is in place. Follow these steps if the USB driver is not in place : Check the device manager. ● Windows 98/ME: Control Panel → System → Device Manager ● Windows 2000 (Professional): Control P...

21 20 Using the removable storage 1 2 N N N N o o o o tt tt ii ii cc cc e e e e ● The “WRITING/READING” message will appear during filedownload or upload. Disconnecting the USB cable while“WRITING/READING” is displayed may cause malfunction of the unit. ● The order of music files is not relative to ...

Installing yepp Studio 23 Using the removable storage 22 1 Select the removable diskicon and click the right mousebutton to select [Format] . 2 Press the [Start] button. ● All saved files will be formatted. ● You can change the name of removable disk by selecting [Volume label] . N N N N o o o o tt ...

25 Installing yepp Studio 24 3 Click [Next] in the series of windows that appear. ● Please refer to Help for more information on how to use yepp Studio. Run yepp Studio and press F1. ● Help will appear. Move the arrow to the top of yepp Studio and right click on the mouse.The following selection win...

Adjusting the Volume/Hold Function 27 Playing Music and Turning Off the Device 26 Press the , key during playback to adjust the volume. N N N N o o o o tt tt e e e e ● Volume ranges from 00 to 30. ● Press once to adjust the volume by one step.Press and hold to increase or decrease the volume in grea...

31 Searching for Music/Voice Files 30 N N N N o o o o tt tt e e e e ● VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file. ● In the case of a VBR file, you cannot move to and play the previous track even i...

33 Listening to FM Radio 32 FM Encoding Searching Stored Frequencies N N N N o o o o tt tt e e e e ● You can store up to 20 frequencies. ● Press the button in the PRESET screen to exit the PRESET mode. 1 Press the button in FM Mode. ● PRESET screen will appear. Use the , keys to move to the frequenc...

Using Navigation 35 Loop Repeating 34 Starting Point While playing music files, press the A ↔ B button briefly at the beginning of the loop you want to set. A ↔ appears in the display. Ending Point Press the A ↔ B button briefly again to set the end of the loop. A ↔ B appears in the display. The loo...

Setting up MENU 37 Setting Playlist 36 N N N N o o o o tt tt e e e e ● Select PLAYLIST in File Delete (see “Deleting”) to release all the playlists you set. - Move to the file you want in Navigation mode and press the key. ● The selected file will be marked. ● To release the playlist setting, move t...

39 Managing Files 38 1 Select File in the MENU. (refer to “Setting up MENU”) 2 In File, select File Delete and the mode the target file is in. 3 Use the , key to move to the file you want to delete, press the key and select CONFIRM. Press the key briefly to exit the setting. Deleting 1 Select File i...

Selecting the Play mode 41 Setting the Advanced Functions Settings 1 Select Settings in the MENU. (refer to “Setting up MENU”) 2 In Settings, use the , key to move to the function you want and press the key to select. ● Use key to move to upper menu. 40 1 Select Play mode in Settings. 2 In Play mode...

Display 43 Setting the EQ mode 42 1 Select Sound in Settings. 2 In Sound, use the , key to move to the sound mode you want and press the key. N N N N o o o o tt tt e e e e ● is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from SRS labs, Inc.. ● Please adjust the volume ...

45 Display 44 ● Use the , key to set the Light-On time. ● The setting range for Light-On Time is 0 to 10 seconds. ● When set to On, the Light stays on continuously. ● Use the , key to set the LCD Light-Off time. ● The setting range for Light-On Time is 0 to 10 seconds. ● When set to On, the Light st...

47 46 Power Off Time Encoding Time ● Use the , key to set the Power-Off time. ● You can set the time from 0 to 1 minute. If no key is pressedafter play stops, the unit will automatically turn off after thetime you set. ● If you set it to 0 seconds, it will not turn off automatically. Sleep ● Use the...

49 48 WOW Level Default Volume Adjusting SRS and TruBass LEVEL ● If you select SRS or TruBass in WOW level, you canadjust the level of SRS and TruBass. ● Use the , key to select the level you want. ● The level for SRS and TruBass can each be set within the range of 0 to 10. ● If you select WOW Optim...

53 Troubleshooting 52 The software doesn’t work ● Refer to the recommended PC specifications. yepp does not work and the LCD displays nothing. ● Check the battery capacity ● Check to see if the battery is inserted to the right poles ( + , – ) In PLAY mode, music is not played after pressing the butt...