Page 2 - Contents; PREPARATION 4
2 English Contents PREPARATION 4 Safety Information 4 Description of each icon 11 Description of each control 13 BASIC OPERATION 15 Operating basic mode of Hydro unit 15 Domestic Hot Water (DHW) mode operation 16 Outing mode 17 Silent mode 17 Checking current temperature 18 Checking set temperature ...
Page 4 - WARNING; CAUTION; WARNING; • Extending the power line may result in electric shock or fire.; technician or service company.; Safety Information
Safety Information 4 English 4 English PREP ARATION Before using your new Air to Water Heat pump, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.Because the following operating instructions c...
Page 5 - • Failing to do so may result in electric shock or fire.; appliance in a location where gas may leak.; • This may result in electric shock or fire.; block of ice falls, it may result in injury, death or property damage.
5 English 5 English PREP ARATION Install a switch and circuit breaker dedicated to the Air to Water Heat pump. • Failing to do so may result in electric shock or fire. Fix the outdoor unit firmly so that the electric part of the outdoor unit is not exposed. • Failing to do so may result in electric ...
Page 6 - considered in-warranty and charged to end user.; Do not disassemble and alter the heater at your own discretion.; FOR POWER SUPPLY; the power line into the space behind the appliance.; When not using the Air to Water Heat pump for a long period of time or
Safety Information 6 English 6 English PREP ARATION • Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that ...
Page 7 - FOR USING; Do not touch the circuit breaker with wet hands.
7 English 7 English PREP ARATION FOR USING WARNING If the appliance is flooded, please contact your nearest service center. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact you...
Page 8 - Air to Water Heat pump is operating.
Safety Information 8 English 8 English PREP ARATION After unpacking the Air to Water Heat pump, keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. • If a child places a bag over its head, it may result in suffocation. Do not insert yo...
Page 10 - be supervised to ensure that they do not play with the appliance.; FOR CLEANING; benzene, thinner or alcohol to clean the appliance.; unit since it has sharp edges.; • Failure to do may result in damage, electric shock or fire.
Safety Information 10 English 10 English PREP ARATION This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the applia...
Page 11 - Description of each icon; Display
11 English 11 English PREP ARATION Description of each icon Display 01 02 03 13 14 10 11 04 05 06 07 08 09 12 LED indicator (Green: Normal / Red: Need to be checked) On/Off button Temperature control button NOTE • Without opening the cover of your wired remote controller, you can turn Hydro unit on ...
Page 13 - Description of each control; Buttons
13 English 13 English PREP ARATION Description of each control Buttons 01 02 03 13 14 15 10 11 04 05 06 07 08 09 12
Page 15 - Water Law; Cool; Operating basic mode of Hydro unit
15 English 15 English BA SIC OPERA TION Water Law Hydro unit will automatically adjust the temperature of discharge water with auto mode for indoor heating. NOTE • When “Water Law” is active, the target supply water temperature will be determined automatically depending on the outdoor temperature: F...
Page 17 - Outing mode
17 English 17 English BA SIC OPERA TION Heating can operate at low temperature while you are out with the Outing mode.Select outing mode by pressing the Outing button. • will be displayed and outing mode will operate. Cancel Press any button on the remote controller. NOTE • When pressing the Outing ...
Page 18 - Checking current temperature
Checking current temperature 18 English 18 English BA SIC OPERA TION You can check current temperature.Check the current temperature by pressing the View button. • Current temperature can be checked in order of (indoor) → (outdoor) → (discharge water) → (hot water) by pressing the View button. • The...
Page 20 - Setting weekly timer
20 English 20 English BA SIC OPERA TION You can operate or stop a desired mode on the day and time you reserve. Setting weekly timer 1 Press the Timer button. • (Timer) will be displayed and then select 'Weekly' among 'Daily', 'Weekly', or 'Holiday' by pressing the [ ]/[ ] button. 2 After pressing t...
Page 22 - Setting a holiday with weekly timer
22 English 22 English BA SIC OPERA TION You can set a holiday with the weekly timer. The set weekly timer will not function when holiday setting is applied. Setting a holiday with weekly timer 1 Press the Timer button. • (Timer) is displayed and then select 'Holiday' among 'Daily', 'Weekly', or 'Hol...
Page 23 - Canceling a weekly timer
23 English 23 English BA SIC OPERA TION You can cancel weekly timer function. Canceling a weekly timer 1 Press the Timer button. • (Timer) is displayed and (Weekly) will blink. 2 After pressing the [ ] button, select the 'Day' you want to cancel. • Select a reserved day by pressing the [ ]/[ ] butto...
Page 24 - Initializing a weekly timer
24 English 24 English BA SIC OPERA TION You can initialize all the weekly timer set with the wired remote controller. Initializing a weekly timer 1 Press the Delete button for 5 seconds. • All the weekly timer settings will be deleted. NOTE • You can’t restore your old settings after deleting the we...
Page 25 - Setting daily timer
25 English 25 English BA SIC OPERA TION Hydro unit can operate or stop at the time you reserve every day. (Silent mode and DHW mode can be reserved.) The reservation time for Silent mode and DHW mode should be different. Setting daily timer 1 Press the Timer button. • (Timer) will be displayed and t...
Page 27 - How to set the detailed setting (User setting mode)
27 English 27 English AD VANCED OPERA TION How to set the detailed setting (User setting mode) 1 2 3 4 Main menu Sub-menu SEG Used 1 If you want to enter the user set mode, press the User set button. • You will enter the User Set mode, and the ‘main menu’ will be displayed. 2 Refer to the Wired Remo...
Page 28 - User setting mode
28 English 28 English AD VANCED OPERA TION User setting mode Main menu Sub- menu Function SEG number Default Range Unit 1 1 All lock 1 0 0-Unlock, 1-Lock - 2 Partial key lock Operation On/Off key lock 1 0 0-Unlock, 1-Lock Operation selection key lock 2 0 0-Unlock, 1-Lock Temperature setting key lock...
Page 31 - Wired remote controller installation; Initializing your wired remote controller communication
31 English 31 English AD VANCED OPERA TION Wired remote controller installation Initializing your wired remote controller communication 1 Press the Esc and Delete buttons at the same time for more than 5 seconds. • The communication of your wired remote controller will be initialized, and the device...
Page 32 - Error display on the wired remote controller
Wired remote controller installation 32 English 32 English AD VANCED OPERA TION Error display on the wired remote controller ※ The address of Hydro unit is displayed “200000” • Error codes for the wired remote controller and the product connected to your wired remote controller will be displayed in ...
Page 33 - Use of wired remote controller installation / service mode; Use of installation/service mode
33 English 33 English AD VANCED OPERA TION Use of wired remote controller installation / service mode Use of installation/service mode 1 2 3 4 Main menu Sub-menu SEG Used 1 If you want to use the installation/service mode for your wired remote controller, press the Set and ESC buttons at the same ti...
Page 34 - Installation/Service mode
34 English 34 English AD VANCED OPERA TION Installation/Service mode NOTE • 'NONE' will be displayed for the menu that setting modes don't support. In some cases, the setting may not be possible or it may not be applied though it is set on the unit. • If communication initialization is needed after ...
Page 36 - Field specification setting mode of wired remote controller; Use of field specification setting mode
36 English 36 English AD VANCED OPERA TION Field specification setting mode of wired remote controller Use of field specification setting mode Data Main menu Sub-menu 1 If you want to use the field specification setting mode for your wired remote controller, press the Set and [ ]buttons at the same ...
Page 37 - Use of field specification checking mode
37 English 37 English AD VANCED OPERA TION Use of field specification checking mode Data Main menu Sub-menu 1 If you want to use the field specification checking mode for your wired remote controller, press the Set and [ ]buttons at the same time for more than 3 seconds. 2 Refer to the list of field...
Page 38 - Field setting mode
38 English 38 English AD VANCED OPERA TION Field setting mode Field Setting Value (FSV) Table NOTE • Reset the power after changing the Field Setting Value. Code 10∗∗ : Upper and lower temperature limits of each operation mode of wired remote controller Heating(Water Out, Room), Cooling(Water Out, R...
Page 41 - Remote Controller Setting Range : Code 10∗∗
41 English 41 English AD VANCED OPERA TION Field Setting Value Main Menu & Code Sub Menu Function Description Sub Code Default Min Max Step Unit Others Code 50∗∗ Outing Auto Cooling WL1 Temp ∗∗15 25 5 25 1 ˚C Auto Cooling WL2 Temp ∗∗16 25 5 25 1 ˚C Auto Heating WL1 Temp ∗∗17 15 15 55 1 ˚C Auto H...
Page 44 - DHW Heating : Code 30∗∗
Field setting mode 44 English 44 English AD VANCED OPERA TION External Room Thermostat (Field Option) • Terminal #1 (#2091, Default “0” for no usage), #2 (#2092, Default “0” for no usage) – To use wired remote controller for heating/cooling operation, both of the above settings should be set to “0” ...
Page 53 - Maintenance activities; Emergency heating / Emergency hot water supply
53 English OTH ERS Maintaining the unit Maintenance activities • In order to ensure optimal availability of the unit, a number of checks and inspections on the unit and the field wiring have to be carried out at regular intervals, preferably yearly. This maintenance should be carried out by SAMSUNG ...
Page 55 - Troubleshooting tips
55 English OTH ERS If the unit has some problem to work properly, error codes will be displayed on the wired remote controller. The following table describes the explanation of the error codes. Troubleshooting tips Display Explanation EVA Inlet temp sensor SHORT or OPENEVA Outlet temp sensor SHORT o...
Page 56 - Communication
Troubleshooting tips 56 English OTH ERS Communication Display Explanation Communication error between remote controller and the Hydro unitTracking error between remote controller and the Hydro unitMemory (EEPROM) Read/Write Error (Wired remote Controller data error) E601, E604 E654 • MEMORY(EEPROM) ...
Page 58 - Error codes
58 English OTH ERS If the unit has some problems and does not work normally, error code is shown on the OUTDOOR UNIT main PBA or LCD of the wired remote controller. Error codes Display Explanation Error Source 101 Hydro Unit / OUTDOOR UNIT wire connection error Hydro Unit, OUTDOOR UNIT 122 EVA Inlet...
Page 60 - Product specification
60 English OTH ERS Product specification Indoor AE090JNYDEH AE160JNYDEH AE090JNYDGH AE160JNYDGH Weight (Net) kg 45.0 45.0 46.5 46.5 Dimensions (Net) mm 850 x 510 x 315 850 x 510 x 315 850 x 510 x 315 850 x 510 x 315 Indoor AE090MNYDEH AE160MNYDEH AE090MNYDGH AE160MNYDGH Weight (Net) kg 45.5 46.5 46....
Page 61 - Memo
