Samsung 70 - Manual
Samsung 70 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Samsung DCS Application Note No 15 - Issue 01
Page 1 of 8
For Further Information Call LSP Communications
No.
15
August 1998
Topic
E and M Tielines
Introduction
•
E&M Tielines are used to connect systems using E&M signalling
•
E&M tielines allow connection between systems supporting E&M tielines and may be used for
intercom calls, transferring calls and LCR applications
•
E&M tieline ports can only be connected other E&M Tieline ports
•
E&M tielines take trunk port positions and may be accessed using direct trunk selection, accessing
a trunk group with the E&M tielines assigned or using LCR
•
When an E&M Tieline is selected, dial tone is heard from the other system and DTMF can be sent
to the receiving E&M Tieline port to access features such as internal calls or accessing a trunk on
the remote system
•
The Samsung DCS and the Samsung DCS 70 provide the option of using a translation table to
interpret the incoming digits to the E&M Tieline port on the DCS. The translation table can be used
in conjunction with LCR.
•
Each E&M tieline card has four ports
Note that a four wire E&M Tieline circuit has six wires associated with it. The numbering refers to the
number of wires used in speech circuits and not the E and M signalling wires.
Figure 1 Four Wire E&M Tieline Circuit as supported on Samsung DCS and DCS 70
Connecting two systems using E&M Tielines
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
Helpful for 3 of 3 readers
About this manual
- Brand
- Samsung
- Model
- 70
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 59.1 KB
- Format