Ryobi UT15520C - Manual - manualsarea.com

Page 3 - SAVE THESE INSTRUCTIONS; GENERAL SAFETY RULES

3 WARNING: Read and understand all instructions. Failure to fol-low all instructions listed below, may result in electric shock, fire, and/or serious personal injury. SAVE THESE INSTRUCTIONS  Read these instructions and the instructions for the power head thoroughly before using pruner.  Know the ...

Page 4 - SPECIFIC SAFETY RULES

4 SPECIFIC SAFETY RULES  Kickback is a dangerous reaction that can lead to serious injury. Kickback may occur when the moving chain con-tacts an object at the upper portion of the tip of the guide bar or when the wood closes in and pinches the chain in the cut. Contact at the upper portion of the t...

Page 5 - SYMBOLS; SYMBOL

5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Precautions that involve your safety. Read The Operato...

Page 7 - FEATURES; KNOW YOUR PRUNER ATTACHMENT; ASSEMBLY; UNPACKING

7 FEATURES Fig. 1 KNOW YOUR PRUNER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operatin...

Page 9 - OPERATION; APPLICATIONS

9 CUTTING GUIDE OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so cou...

Page 10 - LIMBING AND PRUNING

10 OPERATION Fig. 7 60° MAXIMUM LIMBING AND PRUNING See Figures 7 - 8. This unit is designed for trimming small branches and limbs up to 6 in. in diameter. For best results, observe the follow-ing precautions:  Plan the cut carefully. Be aware of the direction in which the branch will fall. �  Bra...

Page 11 - MAINTENANCE; GENERAL MAINTENANCE

11 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear...

Page 13 - CHAIN TENSION; CHAIN OILER

13 MAINTENANCE CHAIN TENSION See Figures 17 - 18.  Stop the engine before setting the chain tension. Make sure the guide bar nut is loose to finger tight, turn the chain tensioning screw clockwise to tension the chain. Refer to Replacing the Bar and Chain for additional information. A cold chain is...

Page 14 - CHAIN MAINTENANCE

14 MAINTENANCE CUTTING CORNER SIDE PLATE DEPTH GAUGE TOE GULLET HEEL RIVET HOLE TOP PLATE PARTS OF A CUTTER Fig. 21 Fig. 22 DEPTH GAUGE SETTING Fig. 20 Fig. 23 CHAIN MAINTENANCE See Figure 20. WARNING: The chain is very sharp; always wear protective gloves when performing maintenance to the chain. U...

Page 15 - ATTACHING THE STORAGE HANGER; TROUBLESHOOTING; Problem

15 MAINTENANCE CAUTION: Dull or improperly sharpened chain can cause excessive engine speed during cutting, which may result in severe engine damage. ATTACHING THE STORAGE HANGER See Figure 25. There are two ways to hang the attachment for storage.  To use the hanger cap, push in the button and pla...

Page 16 - EXPLODED VIEW AND PARTS LIST

16 EXPLODED VIEW AND PARTS LIST 10 9 6 3 1 4 7 11 8 5 2 17 18 13 19 23 15 14 2021 32 24 16 26 25 12 34 33 22 38 27 28 29 31 30 35 36 37 9

Page 18 - NOTES

Page 19 - WARRANTY; LIMITED WARRANTY STATEMENT

19 WARRANTY LIMITED WARRANTY STATEMENT Techtronic Industries North America, Inc., warrants to the original retail purchaser that this EXPAND-IT brand product is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North America, Inc.’s discretion, an...

Page 20 - For parts or service, contact your nearest Expand-it; REPAIR PARTS; MODEL NUMBER; OPERATOR’S MANUAL; Pruner Attachment

20 TECHTRONIC INDUSTRIES NORTH AMERICA, INC. 1428 Pearman Dairy Road Anderson, SC 29625 Phone 1-800-242-4672 983000-9332-20-06 (REV:00) SERVICE For parts or service, contact your nearest Expand-it ™ authorized service center. Be sure to provide all relevant information when you call or visit. For th...

Ryobi UT15520C - Manual

Table of Contents:

Summary

Other Ryobi Models