Ryobi TR31-1- User Manual
Ryobi TR31-1– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; DOUBLE INSULATION; INTRODUCTION
- Page 3 – GENERAL SAFETY RULES
- Page 4 – SAVE THESE INSTRUCTIONS; Additional Rules for Safe Operation; SPECIFIC SAFETY RULES
- Page 5 – SYMBOLS
- Page 7 – FEATURES
- Page 8 – ADJUSTMENTS; INSTALLING/REMOVING CUTTERS
- Page 9 – OPERATION; HOW TO OPERATE YOUR TRIMMER; FEED DIRECTION
- Page 12 – MAINTENANCE; BRUSH REPLACEMENT; PROPER CARE OF CUTTERS; LUBRICATION
- Page 13 – ACCESSORIES; HELPFUL HINTS
- Page 14 – TRIMMING WITH SUBBASE ACCESSORY
- Page 16 – DOUBLE INSULATED; • SERVICE; MODEL NUMBER
We have engineered and manufactured your new Laminate Trimmer to Ryobi’s high standard for dependability, ease of
operation, and operator safety. When properly cared for, the Laminate Trimmer will give you years of rugged, trouble-free
performance.
WARNING:
Carefully read through this entire operator’s manual before using your new trimmer.
Thank you again for buying Ryobi tools.
OPERATOR’S MANUAL
LAMINATE TRIMMER
MODEL TR31-1
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Maximum Cutter Diameter
1-3/8 in. (34.9 mm)
Collet
1/4 in. (6.4 mm)
Horsepower
3/4
Rating
120 volts, 60 Hz AC only, 3.8 amperes
No Load Speed
23,000 RPM
Power Cord
10 ft. (3 m)
Net Weight
3.0 lbs. (1.4 kg.)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Ryobi TR31-1
Summary
Page 2 TABLE OF CONTENTS ■ Introduction ..................................................................................................................................................... 2 ■ General Safety Rules ........................................................................................
Page 3 ■ Avoid accidental starting. Be sure switch is off beforeplugging in. Carrying tools with your finger on the switchor plugging in tools that have the switch on invites acci-dents. ■ Remove adjusting keys or wrenches before turningthe tool on. A wrench or a key that is left attached to arotati...
Page 4 WARNING: Some dust created by power sanding, sawing, grinding,drilling, and other construction activities containschemicals known to cause cancer, birth defects orother reproductive harm. Some examples of thesechemicals are: • lead from lead-based paints, • crystalline silica from bricks and ...
