Page 3 - SAvE THESE iNSTRUcTiONS; GENERAL SAFETY RULES; SERvicE
3 WARNiNG! READ AND UNDERSTAND ALL iNSTRUcTiONS. Fail-ure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAvE THESE iNSTRUcTiONS Read the operator’s manual carefully. Be thoroughly famil-iar with the controls and the proper use of the eq...
Page 4 - REFUELiNG; SPEciFic SAFETY RULES
4 Do not use near underground electric cables, telephone lines, pipes, or hoses. If in doubt, contact your utility or telephone company to locate underground services. If the unit strikes a foreign object, stop the engine, dis-connect the spark plug, thoroughly inspect the machine for any damage...
Page 5 - SYMBOLS
5 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer. Read The Operator’s Manual Safety Alert Keep Bystanders Away Cutting Hazard SYMBOL NAME DESi...
Page 7 - FEATURES
7 FEATURES Fig. 1 PRODUcT SPEciFicATiONS Engine Size ................................................................................................................................................................... 5.4ccEngine Output ...................................................................
Page 8 - ASSEMBLY
8 POSiTiONiNG THE HANDLEBAR See Figure 2. Loosen the two handlebar knobs. Unfold the handlebar into operating position. NOTE: Do not use force. If there is binding, continue to loosen the knobs. Do not allow throttle cable to become pinched when raising the handlebar. Retighten the handlebar k...
Page 9 - iNSTALLiNG THE TiNES
9 Fig. 3 iNSTALLiNG THE WHEEL ASSEMBLY AccESSORY See Figures 3 - 4. Use the wheel assembly accessory to transport the unit to and from the work area. To install: Raise the adjustment knob located at the back of the tine shield. Twist slightly to secure in the raised position. Insert the wheel as...
Page 10 - MiXiNG THE FUEL; ADDiNG FUEL TO cULTivATOR
10 ASSEMBLY WARNiNG: Gasoline and its vapors are highly flammable and explo-sive. To prevent serious personal injury and property dam-age, handle it with care. Keep away from ignition sources, handle outdoors only, do not smoke while mixing gasoline and oil together; and wipe up spills immediately. ...
Page 11 - ADDiNG SAND; OPERATiON; APPLicATiONS
11 WARNiNG: Do not allow familiarity with products to make you care-less. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNiNG: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in object...
Page 12 - STOPPiNG THE PRODUcT
1 OPERATiON Fig. 10 Fig. 1 Fig. 11 PRIMER BULB Set the choke lever to FULL (Choke Closed). Squeeze throttle trigger fully and pull starter handle sharply (no more than 5x). Set the choke lever to HALF (Choke Open). Pull starter handle until engine runs, no more than 6 pulls. Run the engine...
Page 13 - GENERAL cULTivATiNG
13 To dig more deeply, lift up on the handlebar. Apply downward pressure on the handlebar for more shallow cultivating.If the machine stays and digs in one spot, try rocking the unit from side to side to start it moving forward again. If the soil is very hard, water a few days before cultivating. Av...
Page 14 - ADJUSTMENTS; ADJUSTiNG WHEEL POSiTiON
14 ADJUSTMENTS WARNiNG: To prevent accidental starting that could cause serious personal injury, always disconnect the spark plug wire when making adjustments. ADJUSTiNG WHEEL POSiTiON See Figures 15 - 17. The wheel position of the unit is adjustable. Holes on the wheel support rod offer different h...
Page 15 - MAiNTENANcE; GENERAL MAiNTENANcE
15 MAiNTENANcE WARNiNG: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNiNG: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear...
Page 16 - REPLAciNG THE SPARK PLUG
16 MAiNTENANcE To replace the spark arrestor: Remove the five screws that hold th e muffler. NOTE: Removing these screws requires the use of a T0 and T5 torx screwdriver. Remove the muffler assembly and muffler gasket. It may be necessary to work the muffler assembly free from the muffler gasket...
Page 17 - STORiNG THE cULTivATOR; PREPARiNG FOR USE AFTER STORAGE
17 MAiNTENANcE cLEANiNG THE EXHAUST PORT AND MUFFLER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, a quali-fied servic...
Page 18 - TROUBLESHOOTiNG; CALL US FIRST; For any questions about operating or maintaining your product,
18 TROUBLESHOOTiNG PROBLEM cAUSE REMEDY Engine fails to start. Engine switch is in the off position.No fuel in tank.Spark plug shorted or fouled.Spark plug is broken (cracked porcelain or electrodes broken).Ignition lead wire shorted, broken, or disconnected from spark plug.Ignition inoperative. Mov...
Page 19 - WARRANTY; LiMiTED WARRANTY STATEMENT
19 WARRANTY LiMiTED WARRANTY STATEMENT Techtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI ® brand outdoor product is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North America, Inc.’s, discret...
Page 21 - THiS PRODUcT WAS MANUFAcTURED WiTH A cATALYST MUFFLER
EMiSSiONS MAiNTENANcE ScHEDULE AND WARRANTED PARTS LiST Emissions Parts inspect Before clean Every Replace clean Every Replace Every Each Use 5 Hours Every 25 Hours 25 Hours 50 Hours or Yearly or Yearly cATALYST MUFFLER ASSEMBLY ..........................................................................
Page 22 - OPERATOR’S MANUAL; cULTivATOR; TEcHTRONic iNDUSTRiES NORTH AMERicA, iNc.; PARTS AND SERVICE; • MODEL NUMBER; HOW TO OBTAIN REPLACEMENT PARTS:; Replacement parts can be purchased online at; HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:; Authorized Service Centers can be located online at; HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
OPERATOR’S MANUAL cULTivATOR RY60520 WARNiNG: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.cALiFORNiA PROPOSiTiON 65 RY6050 987000-06703-9-07 (REV:01) TEcHTRONic iNDUSTRiES NORTH AMERicA, iNc. 148 ...