Page 2 - SPECIFICATIONS; 0A ELECTRIC POWER HEAD; CONTENTS
2 Introduction .......................................................................................................................... 2G e n e r a l S a f e t y I n s t r u c t i o n ............................................................................... 3 - 5Symbols .......................
Page 3 - GEnERAL SAFETY InSTRUCTIOnS; W A R N I N G; READ ALL INSTRUCTIONS
3 GEnERAL SAFETY InSTRUCTIOnS W A R N I N G Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Do not use without guard and handle in place. READ ALL INSTRUCTIONS • For saf...
Page 6 - SYMBOL SIGNAL MEANING; WARING:; SYMBOLS; SYMBOL NAME DESIGNATION/EXPLANATION
6 The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which if not avoided, will result in death or serious injury. WARING: Indicates a potentially hazardous situat...
Page 7 - SYMBOL NAME DESIGNATION/EXPLANATION; SyMBOlS; SAVE THESE INSTRUCTIONS
7 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per ...
Page 8 - ELECTRICAL; EXTENSION CORDS; FEATURES; KNOW YOUR PRODUCT
8 ELECTRICAL EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. U...
Page 9 - CORD RETAINER; ASSEMBLY; UNPACKING
9 FEATURES CORD RETAINER The cord retainer helps prevent accidental unplugging of the extension cord. LOCK-OUT BUTTON The lock-out button reduces the possibility of accidental starting. FRONT HANDLE The power head is equipped with a front handle assembly for ease of operation and to prevent loss of ...
Page 10 - ASSeMBly; PACKING LIST
10 ASSeMBly W A R N I N G If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. W A R N I N G Do not attempt to modify this product or create accessories not recommended...
Page 11 - ATTACHING THE FRONT HANDLE
11 ASSEMBLY This electric power head may be used with only the following Greenworks, and Ryobi Expand-it attachments. GW 29402 Straight Shaft String Trimmer, 29017 Hedge Trimmer, 29027 Pole Saw, 29047 Tiller, 29057 brush Cutter, 29067 Blower RY15518 Edger RY15520 Pruner RY15523 Straight Shaft String...
Page 12 - CONNECTING TO POWER SUPPLY
12 ASSeMBly OPERATIOn W A R N I N G Read and understand entire Operator’s Manual for each optional attachment used on this power head and follow all warnings and instructions. Failure to follow all instructions may result in electric shock, fire and/or serious personal injury. W A R N I N G Do not a...
Page 13 - OPERATION; STARTING AND STOPPING THE POWER HEAD
13 OPERATION NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening from receptacle. LOCK-OUT BUTTON (See Figure 6.) The lock-out button reduces the possibility of accidental starting. The lock-out button is located on the handle above the switch tr...
Page 14 - OPERATIOn; OPERATING THE POWER HEAD
14 OPERATIOn Hold the power head with your right hand on the rear handle and your left hand on the front handle. Keep a firm grip with both hands while in operation. Power head should be held at a comfortable position with the rear handle about hip height. Always operate power head at full throttle....
Page 16 - MAInTEnAnCE; GENERAL MAINTENANCE; CLEANING THE POWER HEAD
16 OPERATIOn W A R N I N G Extreme care must be taken when using a blade attachment to ensure safe operation. Read the safety information for safe operation when using a blade attachment and refer to the safety rules and instructions in your attachment manual. never use a brush cutter attachment wit...
Page 17 - STORING THE POWER HEAD; TROUBleSHOOTINg; PROBLEM
17 MAInTEnAnCE NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene. STORING THE POWER HEAD • Clean all foreign material from the product. • Store it in a well-ventilated pla...
Page 18 - LIMITED FOUR-YEAR WARRANTY; proof of
18 LIMITED FOUR-YEAR WARRANTY GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to bedefec...
Page 19 - EXPLODED VIEW
Page 20 - PART LIST
20 PART LIST PartsNum. 1 31301524L Left motor housing 12 31301524R Right motor housing 13 3220313 Screw 134 33301511 Hook 15 34101524 Switch knob 16 36301511 Switch 17 33904524 Spring 18 33901524 Spring 19 34102524 Trigger 110 33204511 Pin 111 33101511 Soft shaft assb. 112 36101511B Motor 113 331035...
Page 24 - Printed in China on 100% Recycled Paper
Printed in China on 100% Recycled Paper Rev: 00 (07-30-11) TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)